Intel HD Graphics 5500 not working on Sierra

[Urgh123]

Hi, I have an Intel HD Graphics 5500. I already tried the minStolenSize patch but, full QECI wont work. I also already used also ig-platform-id=0x16260006. The video memory is also 5mb only. Please help

 

[RehabMan]

Hi, I have an Intel HD Graphics 5500. I already tried the minStolenSize patch but, full QECI wont work. I also already used also ig-platform-id=0x16260006. The video memory is also 5mb only. Please help

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Also, your profile must be filled out with complete details as requested in the FAQ, again under "Q. Where do I start?". All seven details requested are equally important.

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"

 

[Urgh123]

Already updated it

 

[RehabMan]

Already updated it

Your profile is still incomplete.
And no problem reporting files attached.
Read post #2. Again. Carefully.

 

[Urgh123]

here are the files. going to attach the efi folder later

 

[RehabMan]

here are the files...

Nothing attached.

 

[Urgh123]

just attached it already, edited the reply to compress files into zip format

 

[RehabMan]

just attached it already, edited the reply to compress files into zip format

"Problem Reporting" files are incomplete.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

 

[Urgh123]

Can't use gen_debug.sh tool, need internet connection. Laptop still can't use ethernet port and wifi. Here are the files...

 

[RehabMan]

Can't use gen_debug.sh tool, need internet connection. Laptop still can't use ethernet port and wifi. Here are the files...

You have many non-recommended (and not needed) kexts installed.
It is clear you didn't follow the guide.
And you don't even have a config.plist.
Start over with the guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/