Contribute
Register

Improper shutdown Issue!

Status
Not open for further replies.
Joined
Jul 23, 2011
Messages
88
Motherboard
ASUS H81M-CS- UEFI Bios 3602
CPU
Intel Pentium G3220 @ 3.00 GHz
Graphics
Nvidia 210 (1024MB)
Mobile Phone
  1. Android
  2. iOS
CONFIG:

Intel Pentium G3220 @ 3.00 Ghz
ASUS H81M-CS - Rev. 1.0 - UEFI Bios 0402
(Lan - Realtek 8111GR | Audio - ALC 887)
4GB DDR 3
HDD 500GB SATA
Nvidia 210 1GB
VGA Monitor

I have this config with me, and need to learn xcode....

Needed to know will i be able to install High Sierra on this rig...?
 
Clover configurator app will be easy to set config. I have a G3258 with a gt210 runs great.

CPUID fake ID 0x0106E0 to install after its running I use 0x0306A0. I’ll send you an EFI folder. Just make a unibeast or clover USB installer and follow the basic install guide. Set PEG (vCard) as primary display output in bios.
 

Attachments

  • G3258 EFI.zip
    3.9 MB · Views: 242
  • config copy.plist.zip
    5.3 KB · Views: 204
Last edited:
@ gigamaxx
tx buddy, also what smbios def to use? for my rig?
and should i use onboard gfx during installation or directly plugin the card then install?

thanx
 
@ gigamaxx
tx buddy, also what smbios def to use? for my rig?
and should i use onboard gfx during installation or directly plugin the card then install?

thanx

I just uploaded the EFI, just use the gt210 for instal. If you make a USB mount the EFI partition and replace the EFi folder with the one I uploaded. Either use the config.plist copy and rename it to config.plist or just edit the original using the clover boot menu. To edit at bot just use cursors arrows and go to "options" tab and hit enter. Then go to "binaries" and set CPUID to 0x0106E0. You may need to use this for the install 3-4 boot cycles. After installed you can use the original plist with 0x0306A0.
 
ok buddy... creating the pd using unibeast...
will update as soon as i test the install.
 
OH I THINK MY GFX CARD IS VGA AS ITS IN A BLUE SLOT AND NOT PCI-E.
HAVE TO BUY A CHEAP NVIDIA PCI-E CARD FOR DISPLAY
 
right now tried without the gfx card, and the installation crashes within 10 sec.

@Gigamaxx
buddy your config.plist has a lot of entries, which might be specific to your system...
so should i use ur config?
 
right now tried without the gfx card, and the installation crashes within 10 sec.

@Gigamaxx
buddy your config.plist has a lot of entries, which might be specific to your system...
so should i use ur config?

If your trying without graphics card use boot menu and set inject intel, fake ID 0x04128086 and ig platform 0x0D220003.

Also make sure to use CPUID either 0x0106E0 or 0x0306A0 in Binaries.
 
will the system work properly without gfx card as well?
if yes then ill not buy the card....
 
will the system work properly without gfx card as well?
if yes then ill not buy the card....

Mine works but the graphics crash when browsing. It should boot up but not perform well.
 
Status
Not open for further replies.
Back
Top