Contribute
Register

[solved] Acer vn7-591g bluetooth problem

Status
Not open for further replies.
Joined
Jul 26, 2017
Messages
7
Motherboard
VC66
CPU
i5 8400
Graphics
HD 630
Mac
  1. Mac mini
Classic Mac
  1. iBook
Mobile Phone
  1. iOS
Acer VN7-591G
Intel Core i7-4710HQ
16 GB RAM
120 GB SSD
Nvidia 860M + Intel HD 4600
Realtek ALC283 @ Intel Lynx Point PCH - High Definition Audio Controller
Realtek RTL8168/8111 Gigabit-LAN (10/100/1000MBit)
Wifi: M.2 NGFF Broadcom BCM94352z (replaced)
all function is working include custom usb DSDT of usbinjectall.kext
Airdrop working and bluetooth can on/off, But it keep research for bluetooth devices and can't connect to my iphone.
i check in system preference have bluetooth and all enable.
appreciate to help me ?
thank you.
 

Attachments

  • EFI.zip
    2.5 MB · Views: 115
Acer VN7-591G
Intel Core i7-4710HQ
16 GB RAM
120 GB SSD
Nvidia 860M + Intel HD 4600
Realtek ALC283 @ Intel Lynx Point PCH - High Definition Audio Controller
Realtek RTL8168/8111 Gigabit-LAN (10/100/1000MBit)
Wifi: M.2 NGFF Broadcom BCM94352z (replaced)
all function is working include custom usb DSDT of usbinjectall.kext
Airdrop working and bluetooth can on/off, But it keep research for bluetooth devices and can't connect to my iphone.
i check in system preference have bluetooth and all enable.
appreciate to help me ?
thank you.

What do you mean by "can't connect to my iphone"?
The iPhone uses BT4LE, so you should not expect it will pair (it will connect, then disconnect right away).
 
What do you mean by "can't connect to my iphone"?
The iPhone uses BT4LE, so you should not expect it will pair (it will connect, then disconnect right away).
Thank you for your response.
I have JBL speaker, cant connect.
iphone 6s-> air drop is working, but cannot connect bluetooth.
Btw, i patched battery and have , touchpad of voodoo working but dont have options in sys prefe,
I added some attachments.
thank you.
 

Attachments

  • Screen Shot 2018-06-10 at 11.05.05 PM.png
    Screen Shot 2018-06-10 at 11.05.05 PM.png
    234.7 KB · Views: 170
  • Screen Shot 2018-06-10 at 11.05.15 PM.png
    Screen Shot 2018-06-10 at 11.05.15 PM.png
    150.3 KB · Views: 184
  • Screen Shot 2018-06-10 at 11.06.13 PM.png
    Screen Shot 2018-06-10 at 11.06.13 PM.png
    288.4 KB · Views: 187
  • Screen Shot 2018-06-10 at 11.07.02 PM.png
    Screen Shot 2018-06-10 at 11.07.02 PM.png
    86.7 KB · Views: 183
  • Screen Shot 2018-06-10 at 11.17.52 PM.png
    Screen Shot 2018-06-10 at 11.17.52 PM.png
    165 KB · Views: 166
  • Screen Shot 2018-06-10 at 11.18.00 PM.png
    Screen Shot 2018-06-10 at 11.18.00 PM.png
    53.7 KB · Views: 188
Thank you for your response.
I have JBL speaker, cant connect.
iphone 6s-> air drop is working, but cannot connect bluetooth.
Btw, i patched battery and have , touchpad of voodoo working but dont have options in sys prefe,
I added some attachments.
thank you.

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.
 

Attachments

  • debug_24645.zip
    4.4 MB · Views: 109
Your kextcache output proves kexts are not installed correctly.
All kexts you need must be installed to the system volume.
Read post #2 of the Clover guide for details:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

I didn't check anything else.
After install all kexts to s/l/e my bluetooth is seem working. :D
it can connect to my iphone and speaker, but the range too near, too close with my laptop.
Any suggestions for increasing the range of bluetooth ?.
my fault is dont read guide clearly.
Thank you.
 

Attachments

  • debug_31921.zip
    1.8 MB · Views: 113
  • Screen Shot 2018-06-14 at 11.28.19 PM.png
    Screen Shot 2018-06-14 at 11.28.19 PM.png
    238 KB · Views: 172
btw, i use SSDT-UIAC.aml to patch usbinjectall, my laptop dont have usb 2.0 just only have 3.0, and when i apply this patch, usb 3.0 is removed, all change to 2.0 . Maybe it normal ?
 

Attachments

  • Screen Shot 2018-06-15 at 12.00.17 AM.png
    Screen Shot 2018-06-15 at 12.00.17 AM.png
    99.6 KB · Views: 154
After install all kexts to s/l/e my bluetooth is seem working. :D
it can connect to my iphone and speaker, but the range too near, too close with my laptop.
Any suggestions for increasing the range of bluetooth ?.
my fault is dont read guide clearly.
Thank you.

As per FAQ, kexts should be installed to /L/E on 10.11 and later, not /S/L/E.

btw, i use SSDT-UIAC.aml to patch usbinjectall, my laptop dont have usb 2.0 just only have 3.0, and when i apply this patch, usb 3.0 is removed, all change to 2.0 . Maybe it normal ?

It means you made a mistake.


No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.
 
Status
Not open for further replies.
Back
Top