- Joined
- Jul 6, 2013
- Messages
- 14
- Motherboard
- GIGABYTE Z490 Vision D
- CPU
- i7-10700
- Graphics
- RX-580 8GB
- Mac
- Mobile Phone
- Updated apfs.efi
- Updated via web, Nvidia GTX 1060 6GB
- Everything works fine
Problem is I can not boot to macOS from Clover 4509 because the macOS boot entry is missing. Only Windows boot entries are visible (I am dual booting from 2 separate SSD).Not needed. I've updated my Clover a couple of times. The tonymacx86 Clover installer is meant to run right on your Desktop. Download the installer, run it and then reboot. It's that easy.
Problem is I can not boot to macOS from Clover 4509 because the macOS boot entry is missing. Only Windows boot entries are visible (I am dual booting from 2 separate SSD).
Thanks, I’ll try that.
How are the web drivers used by the 10.13.5 updated? I mean in the intermediary step of booting from the boot install disk that is only there when upgrading, are the web drivers used for that somehow?
I have a Clover USB boot drive but it has an older macOS 10.13.3 and earlier Clover build installed, so somehow I still could not boot to my main mac partition. I will create a new 10.13.5 boot drive with 4428 clover and try again.Quoted from Monewbo on ******;
« 4502 IIRC and newer no longer automatically installs vboxhfs64.efi.
You have to select it, (it'sunder drivers64uefi) when installing or add it to /EFI/EFI/Clover/dirivers64UEFI »
- Boot with a Clover USB Bootable drive (if you kept a backup, great! If not, you can create a new one by following the Installation Guide and on step 4 your main partition should show up)
- With Clover Configurator, update to 4509 but this time with custom installation (make sure the vboxhsf64.efi is checked)
- Reboot and your drive should show up
Every time i try to boot from Install partition after restarting, it gives me a prohibitory sign. When I boot into verbose, there is graphical glitches when the prohibitory sign shows up and from what I can make of it is "Still waiting for root device". I've tried removing all the flags I have set up in clover to just -v and -x, disabled web driver inject flags and have SIP disabled and still no luck.
All methods including MAS, combo and update.
8700k | Asus Z370-i | MacOS install on external SSD via USB3