- Joined
- Jul 28, 2017
- Messages
- 16
- Motherboard
- GIGABYTE Z370 AORUS Gaming 7
- CPU
- i7-8700K
- Graphics
- UHD 630
- Mobile Phone
Downloaded latest usb-inject-all tried a lot of guide to get it to work, but no luck..
I have tried to download "USBInjectAll.kext" and "FakePCIID_XHCIMux.kext", placed them on my EFI in the other folder, and installed them using KextBeast.
I've set the following in Clover under Kernel and Kext Patches:
Name:
AppleUSBXHCIPCI
Find:
837D8C10
replace:
837D8C1B
comment:
change 15 port limit
MatchOS:
10.13.x
When you have set up everything if you can send me your ktexts and yours config.plst I would be glad, so that I can compare them ..
Regarding my ktexts for your problem; I copied "IntelGraphicsDVMTFixup.kext / IntelGraphicsFixup.kext / Lilu.kext" to my desktop on my hackintosh, run KextBeast, copied them to my efi boot under clover/kexts/Other, set it to Imac 14,2 restarted my computer.
Can send you all my ktexts but not until next thursday, you caught me in a week were I’m kind of away from my computer:/.
Try the ones from Jamesst20 here:
https://www.tonymacx86.com/threads/...-panic-high-sierra.250427/page-3#post-1735036
Apologies for the delay, I'm attaching config.plist and kexts..
You'll need USBInjectAll.kext and then you will have to choose which injector kext to use based on your chipset.. But I suggest you to read carefully here
https://bitbucket.org/RehabMan/os-x-usb-inject-all/overview
You will also have to change something in the config.plist based on your config (i.e. if you're using 10.13.4 everything is explained in the documentation)
Moreover, if you're using 10.13.4 try and google "HACKINTOSH HIGH SIERRA 10.13.4 UPDATE GUIDE" and take at the USB PATCH section
About second display, can you confirm you're using 10.13.4? And what's the behavior when you connect the second monitor? It works instantly when you plug that in? do you plug that in immediately after login?
Attachments
Last edited: