[NoSuccess] Lifebook T904 working Files

[Mike7-7-7]

Hello,

Does anyone have working Clover Files for t904?
I would like to install high sierra.

@sdf101 Did You get Yours hackintoshed?



By the way, these are the specs. Problem seems to be Clover because of Phoenix-Bios:

- Fujitsu Lifebook T904 with BIOS Version 1.17
- Intel i5-4300U CPU
- Haswell-ULT Chipset
- 4GB DDR3 Ram placed at "Bank 2" (only one physical bank) @1600MHz
- Intel HD4400 integrated Graphics (according to CPU)
- WQHD IGZO TouchScreen Display with 2560x1440 Resolution
- Crucial 250GB SSD Harddrive
- Intel N 7260 Wifi (has to be replaced)
- Sierra EM7355 Mobile Broadband (GPS included)
- Bluetooth 4.0 LE
- Intel 218LM Ethernet
- Realtek ALC283 Audio Codec
- Fingerprint Sensor
- 2x USB 3.0 Ports (including One Anytime Charge)

BIOS settings I have tried for legacy, but System always boots in UEFI:

- Boot config: CSM enabled (tried with disabled, too), Fastboot disabled
- CPU Features: Multicore enabed, HT enabled, Virtualisation Technology disabled, Intel VT-d disabled
- Legacy USB support enabled, SCSI subclass enabled, XHCI Controller mode: Compatible
- Hardware PowerManagement: Disabled; Intel Rapid Start disabled, Intel Smart Connect disabled
- TPM Chip disabled
- Secure boot disabled
- Secure boot Option disabled

Attached current Clover folder with unpatched DSDT, because all patches I have are only for Bios v1.11 and v1.13.

 

[P1LGRIM]

Not a Desktop - Moved to Laptop Support.

 

[RehabMan]

Hello,

Does anyone have working Clover Files for t904?
I would like to install high sierra.

@sdf101 Did You get Yours hackintoshed?

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Also, your profile must be filled out with complete details as requested in the FAQ, again under "Q. Where do I start?". All seven details requested are equally important.

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"

 

[Mike7-7-7]

As You see at Specs system should be compatible.

System stucks after loading kernel "++++++++++++++++++++++++++++++"

Removed all OsxAptio... and AptioFixMemory... drivers because they are not for Phoenix-BIOS.

 

[RehabMan]

As You see at Specs system should be compatible.

System stucks after loading kernel "++++++++++++++++++++++++++++++"

Removed all OsxAptio... and AptioFixMemory... drivers because they are not for Phoenix-BIOS.

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

Note: Aptio fixes are NOT specific to Aptio.

 

[Mike7-7-7]

Do not know how to debug clover to send You files.

 

[RehabMan]

Do not know how to debug clover to send You files.

In this guide, you create an EFI/Clover on USB in a partition named "CLOVER EFI":
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Simple matter of plugging the USB into the mac/hack you used to create it, and creating ZIP of that EFI/Clover (without themes) and attaching it.

And, of course, I assume you know how to boot verbose and snap/upload a photo of the failure screen.

Attach both to your reply.

 

[Mike7-7-7]

Please see #1 attached EFI-folder.

I am booting not from usb but internal ssd.

 

[RehabMan]

Please see #1 attached EFI-folder.

I am booting not from usb but internal ssd.

The configuration is not according to the guide...
But you have not stated any problem.
No verbose boot photo attached either (if it is a booting problem).

 

[Mike7-7-7]

Config has been modified because https://github.com/RehabMan/OS-X-Clover-Laptop-Config/blob/master/config_HD4600_4400_4200.plist gave KP and has no -v and no "debug=0x100" option included.