Contribute
Register

[Guide] Creating a Custom SSDT for USBInjectAll.kext

RehabMan said:
As per guide, FakePCIID_XHCIMux.kext does not apply to 100-series chipset and later (no EHCI controller).
And your laptop is not 200-series (no 200-series mobile yet).

You failed to attach any problem reporting files. Please read FAQ, "Problem Reporting" carefully.
Click to expand...
I know what's wrong, because I use search to find XHC. When I use my mouse, everything works well.
BTW, cause I don't have a USB3.0 device on hand, I can just use 2.0 device to test. The result is HS01 02 04 05 is USB3.0 port, so the SS01 02 04 05 is USB3.0 port, too. Right?
屏幕快照 2018-05-09 下午11.17.35.png
 
Thanks for the guide, now I have my custom SSDT in place and ioreg shows me only the correct USB devices as I put them into the SSDT.
For my (new) system, sleep doesn't work. I'm not sure if its related to USB in any way, but I do get these ACPI messages:
Screenshot_20180509-175628.jpg
 

Attachments

  • Screenshot_20180509-175607.jpg
    Screenshot_20180509-175607.jpg
    1.2 MB · Views: 73
gHack Pro 3
H370 HD3 |  i5 8400 |  GeForce Other
Heporis said:
BTW, cause I don't have a USB3.0 device on hand, I can just use 2.0 device to test. The result is HS01 02 04 05 is USB3.0 port, so the SS01 02 04 05 is USB3.0 port, too. Right?
Click to expand...

Not possible to know in advance. There is not necessarily a numeric correlation between SSxx and HSxx.
As per post #1, USB3 device is required.
 
Gymnae said:
Thanks for the guide, now I have my custom SSDT in place and ioreg shows me only the correct USB devices as I put them into the SSDT.
For my (new) system, sleep doesn't work. I'm not sure if its related to USB in any way, but I do get these ACPI messages:
View attachment 330426
Click to expand...

Sleep/other ACPI issues are off-topic here.
 
RehabMan said:
Since you're using the EHCI controller, you need also "EH01", "EH02", "HUB1", "HUB2".
Click to expand...

I had USB2 results on HP13,HP14,HP15,HP16,HP17,HP18 in EH01/PR11 and HP21,HP22,HP25 on EH02/PR21. And USB 3 results on SSP3,SSP4,SSP5,SSP6.

So I have trimmed the data to eliminate unused ports in EH01, EH02, HUB1, HUB2. I am confused about entry 8086_8xxx in SSDT-UIAC-ALL which matches my device ID but all ports are labelled with HS, I didn't have HS results, only HP and SSP?


Code: 
// SSDT-UIAC-ALL.dsl
//
// This SSDT can be used as a template to build your own
// customization for USBInjectAll.kext.
//
// This SSDT contains all ports, so using it is the same as without
// a custom SSDT.  Delete ports that are not connected or ports you
// do not need.
//
// Change the UsbConnector or portType as needed to match your
// actual USB configuration.
//
// Note:
// portType=0 seems to indicate normal external USB2 port (as seen in MacBookPro8,1)
// portType=2 seems to indicate "internal device" (as seen in MacBookPro8,1)
// portType=4 is used by MacBookPro8,3 (reason/purpose unknown)
//

DefinitionBlock ("", "SSDT", 2, "hack", "UIAC-ALL", 0)
{
    Device(UIAC)
    {
        Name(_HID, "UIA00000")

        Name(RMCF, Package()
        {
            "HUB1", Package()
            {
                "port-count", Buffer() { 8, 0, 0, 0 },
                "ports", Package()
                {
                    "HP13", Package()
                    {
                        //"UsbConnector", 0,
                        "portType", 0,
                        "port", Buffer() { 3, 0, 0, 0 },
                    },
                    "HP14", Package()
                    {
                        //"UsbConnector", 0,
                        "portType", 0,
                        "port", Buffer() { 4, 0, 0, 0 },
                    },
                    "HP15", Package()
                    {
                        //"UsbConnector", 0,
                        "portType", 0,
                        "port", Buffer() { 5, 0, 0, 0 },
                    },
                    "HP16", Package()
                    {
                        //"UsbConnector", 0,
                        "portType", 0,
                        "port", Buffer() { 6, 0, 0, 0 },
                    },
                    "HP17", Package()
                    {
                        //"UsbConnector", 0,
                        "portType", 0,
                        "port", Buffer() { 7, 0, 0, 0 },
                    },
                    "HP18", Package()
                    {
                        //"UsbConnector", 0,
                        "portType", 0,
                        "port", Buffer() { 8, 0, 0, 0 },
                    },
                },
            },
            "HUB2", Package()
            {
                "port-count", Buffer() { 6, 0, 0, 0 },
                "ports", Package()
                {
                    "HP21", Package()
                    {
                        //"UsbConnector", 0,
                        "portType", 0,
                        "port", Buffer() { 1, 0, 0, 0 },
                    },
                    "HP22", Package()
                    {
                        //"UsbConnector", 0,
                        "portType", 0,
                        "port", Buffer() { 2, 0, 0, 0 },
                    },
                    "HP25", Package()
                    {
                        //"UsbConnector", 0,
                        "portType", 0,
                        "port", Buffer() { 5, 0, 0, 0 },
                    },
                },
            },
            "EH01", Package()
            {
                "port-count", Buffer() { 8, 0, 0, 0 },
                "ports", Package()
                {
                    "PR11", Package()
                    {
                        "UsbConnector", 255,
                        "port", Buffer() { 1, 0, 0, 0 },
                    },
                },
            },
            "EH02", Package()
            {
                "port-count", Buffer() { 6, 0, 0, 0 },
                "ports", Package()
                {
                    "PR21", Package()
                    {
                        "UsbConnector", 255,
                        "port", Buffer() { 1, 0, 0, 0 },
                    },
                },
            },
            "8086_8xxx", Package()
            {
                "port-count", Buffer() { 21, 0, 0, 0 },
                "ports", Package()
                {
                    "HS01", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 1, 0, 0, 0 },
                    },
                    "HS02", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 2, 0, 0, 0 },
                    },
                    "HS03", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 3, 0, 0, 0 },
                    },
                    "HS04", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 4, 0, 0, 0 },
                    },
                    "HS05", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 5, 0, 0, 0 },
                    },
                    "HS06", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 6, 0, 0, 0 },
                    },
                    "HS07", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 7, 0, 0, 0 },
                    },
                    "HS08", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 8, 0, 0, 0 },
                    },
                    "HS09", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 9, 0, 0, 0 },
                    },
                    "HS10", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 10, 0, 0, 0 },
                    },
                    "HS11", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 11, 0, 0, 0 },
                    },
                    "HS12", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 12, 0, 0, 0 },
                    },
                    "HS13", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 13, 0, 0, 0 },
                    },
                    "HS14", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 14, 0, 0, 0 },
                    },
                    //HS15 is phantom port (port address 15 not used)
                    "SSP3", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 18, 0, 0, 0 },
                    },
                    "SSP4", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 19, 0, 0, 0 },
                    },
                    "SSP5", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 20, 0, 0, 0 },
                    },
                    "SSP6", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 21, 0, 0, 0 },
                    },
                },
            },
        })
    }
}
//EOF
 
Last edited:
Desktop Build: Devil's Canyon 10.11 - 10.13
GA-Z97X-GAMING 3 |  i7 4790K |  GeForce GTX 970
ASUS ZenBook UX430UA-DH74 i7-8550 HD 620
Other |  i7 Other |  HD 630
starcentral said:
I had USB2 results on HP13,HP14,HP15,HP16,HP17,HP18 in EH01/PR11 and HP21,HP22,HP25 on EH02/PR12. And USB 3 results on SSP3,SSP4,SSP5,SSP6.

So I have trimmed the data to eliminate unused ports in EH01, EH02, HUB1, HUB2. I am confused about entry 8086_8xxx in SSDT-UIAC-ALL which matches my device ID but all ports are labelled with HS, I didn't have HS results, only HP and SSP?


Code: 
// SSDT-UIAC-ALL.dsl
//
// This SSDT can be used as a template to build your own
// customization for USBInjectAll.kext.
//
// This SSDT contains all ports, so using it is the same as without
// a custom SSDT.  Delete ports that are not connected or ports you
// do not need.
//
// Change the UsbConnector or portType as needed to match your
// actual USB configuration.
//
// Note:
// portType=0 seems to indicate normal external USB2 port (as seen in MacBookPro8,1)
// portType=2 seems to indicate "internal device" (as seen in MacBookPro8,1)
// portType=4 is used by MacBookPro8,3 (reason/purpose unknown)
//

DefinitionBlock ("", "SSDT", 2, "hack", "UIAC-ALL", 0)
{
    Device(UIAC)
    {
        Name(_HID, "UIA00000")

        Name(RMCF, Package()
        {
            "HUB1", Package()
            {
                "port-count", Buffer() { 8, 0, 0, 0 },
                "ports", Package()
                {
                    "HP13", Package()
                    {
                        //"UsbConnector", 0,
                        "portType", 0,
                        "port", Buffer() { 3, 0, 0, 0 },
                    },
                    "HP14", Package()
                    {
                        //"UsbConnector", 0,
                        "portType", 0,
                        "port", Buffer() { 4, 0, 0, 0 },
                    },
                    "HP15", Package()
                    {
                        //"UsbConnector", 0,
                        "portType", 0,
                        "port", Buffer() { 5, 0, 0, 0 },
                    },
                    "HP16", Package()
                    {
                        //"UsbConnector", 0,
                        "portType", 0,
                        "port", Buffer() { 6, 0, 0, 0 },
                    },
                    "HP17", Package()
                    {
                        //"UsbConnector", 0,
                        "portType", 0,
                        "port", Buffer() { 7, 0, 0, 0 },
                    },
                    "HP18", Package()
                    {
                        //"UsbConnector", 0,
                        "portType", 0,
                        "port", Buffer() { 8, 0, 0, 0 },
                    },
                },
            },
            "HUB2", Package()
            {
                "port-count", Buffer() { 6, 0, 0, 0 },
                "ports", Package()
                {
                    "HP21", Package()
                    {
                        //"UsbConnector", 0,
                        "portType", 0,
                        "port", Buffer() { 1, 0, 0, 0 },
                    },
                    "HP22", Package()
                    {
                        //"UsbConnector", 0,
                        "portType", 0,
                        "port", Buffer() { 2, 0, 0, 0 },
                    },
                    "HP25", Package()
                    {
                        //"UsbConnector", 0,
                        "portType", 0,
                        "port", Buffer() { 5, 0, 0, 0 },
                    },
                },
            },
            "EH01", Package()
            {
                "port-count", Buffer() { 8, 0, 0, 0 },
                "ports", Package()
                {
                    "PR11", Package()
                    {
                        "UsbConnector", 255,
                        "port", Buffer() { 1, 0, 0, 0 },
                    },
                },
            },
            "EH02", Package()
            {
                "port-count", Buffer() { 6, 0, 0, 0 },
                "ports", Package()
                {
                    "PR21", Package()
                    {
                        "UsbConnector", 255,
                        "port", Buffer() { 1, 0, 0, 0 },
                    },
                },
            },
            "8086_8xxx", Package()
            {
                "port-count", Buffer() { 21, 0, 0, 0 },
                "ports", Package()
                {
                    "HS01", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 1, 0, 0, 0 },
                    },
                    "HS02", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 2, 0, 0, 0 },
                    },
                    "HS03", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 3, 0, 0, 0 },
                    },
                    "HS04", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 4, 0, 0, 0 },
                    },
                    "HS05", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 5, 0, 0, 0 },
                    },
                    "HS06", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 6, 0, 0, 0 },
                    },
                    "HS07", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 7, 0, 0, 0 },
                    },
                    "HS08", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 8, 0, 0, 0 },
                    },
                    "HS09", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 9, 0, 0, 0 },
                    },
                    "HS10", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 10, 0, 0, 0 },
                    },
                    "HS11", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 11, 0, 0, 0 },
                    },
                    "HS12", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 12, 0, 0, 0 },
                    },
                    "HS13", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 13, 0, 0, 0 },
                    },
                    "HS14", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 14, 0, 0, 0 },
                    },
                    //HS15 is phantom port (port address 15 not used)
                    "SSP3", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 18, 0, 0, 0 },
                    },
                    "SSP4", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 19, 0, 0, 0 },
                    },
                    "SSP5", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 20, 0, 0, 0 },
                    },
                    "SSP6", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 21, 0, 0, 0 },
                    },
                },
            },
        })
    }
}
//EOF
Click to expand...

You had no HSxx ports on XHC because FakePCIID_XHCIMux is routing them to EHCI.
 
RehabMan said:
You had no HSxx ports on XHC because FakePCIID_XHCIMux is routing them to EHCI.
Click to expand...

I should redo my port discovery without fakePCIID_XHCIMux? Or can I just remove the fakePCIID_XHCIMux now and try my SSDT?

thanks man, this stuff a bit over my head.
 
Desktop Build: Devil's Canyon 10.11 - 10.13
GA-Z97X-GAMING 3 |  i7 4790K |  GeForce GTX 970
ASUS ZenBook UX430UA-DH74 i7-8550 HD 620
Other |  i7 Other |  HD 630
starcentral said:
I should redo my port discovery without fakePCIID_XHCIMux? Or can I just remove the fakePCIID_XHCIMux now and try my SSDT?

thanks man, this stuff a bit over my head.
Click to expand...

The use or non-use of FakePCIID_XHCIMux.kext is really your decision. If you read post #1, you will see how with my u430 I did it both ways.

Personally, I like to keep everything on XHC (means not using XHCIMux) and disable the EHCI controller (desktops usually have an option for this: xHCI mode = "Enabled").
 
RehabMan said:
The use or non-use of FakePCIID_XHCIMux.kext is really your decision. If you read post #1, you will see how with my u430 I did it both ways.

Personally, I like to keep everything on XHC (means not using XHCIMux) and disable the EHCI controller (desktops usually have an option for this: xHCI mode = "Enabled").
Click to expand...

Ok I removed FakePCIID_XHCIMux.kext and redid my port discovery, now everything appears under XHC and this is what I found:

Not used; HS01, HS02, HS07, HS08, HS12,
Used: HS03/SSP3, HS04/SSP4, HS05, HS06, HS09/SSP5, HS10/SSP6, HS11, HS13, HS14,

Below is my edited SSDT-UIAC-ALL.

Do I need to remove the rename of XHC1 to XHX or XHCI to XHC in my config.plist?

Lastly to disable the EHCI controller using xHCI mode = "Enabled".... is this in bios or in clover configurator?

thanks man,

Code: 
// SSDT-UIAC-ALL.dsl
//
// This SSDT can be used as a template to build your own
// customization for USBInjectAll.kext.
//
// This SSDT contains all ports, so using it is the same as without
// a custom SSDT.  Delete ports that are not connected or ports you
// do not need.
//
// Change the UsbConnector or portType as needed to match your
// actual USB configuration.
//
// Note:
// portType=0 seems to indicate normal external USB2 port (as seen in MacBookPro8,1)
// portType=2 seems to indicate "internal device" (as seen in MacBookPro8,1)
// portType=4 is used by MacBookPro8,3 (reason/purpose unknown)
//

DefinitionBlock ("", "SSDT", 2, "hack", "UIAC-ALL", 0)
{
    Device(UIAC)
    {
        Name(_HID, "UIA00000")

        Name(RMCF, Package()
        {
            "8086_8xxx", Package()
            {
                "port-count", Buffer() { 21, 0, 0, 0 },
                "ports", Package()
                {
                    "HS03", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 3, 0, 0, 0 },
                    },
                    "HS04", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 4, 0, 0, 0 },
                    },
                    "HS05", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 5, 0, 0, 0 },
                    },
                    "HS06", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 6, 0, 0, 0 },
                    },
                    "HS09", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 9, 0, 0, 0 },
                    },
                    "HS10", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 10, 0, 0, 0 },
                    },
                    "HS11", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 11, 0, 0, 0 },
                    },
                    "HS13", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 13, 0, 0, 0 },
                    },
                    "HS14", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 14, 0, 0, 0 },
                    },
                    //HS15 is phantom port (port address 15 not used)
                    "SSP6", Package()
                    {
                        "UsbConnector", 3,
                        "port", Buffer() { 21, 0, 0, 0 },
                    },
                },
            },
        })
    }
}
//EOF
 
Desktop Build: Devil's Canyon 10.11 - 10.13
GA-Z97X-GAMING 3 |  i7 4790K |  GeForce GTX 970
ASUS ZenBook UX430UA-DH74 i7-8550 HD 620
Other |  i7 Other |  HD 630
starcentral said:
O
Do I need to remove the rename of XHC1 to XHX or XHCI to XHC in my config.plist?
Click to expand...

Impossible to answer.... you didn't provide any problem reporting files.
You need to look in native ACPI to see what it uses, XHCI, XHC1, or XHC. XHC is quite common, therefore usually no patches needed.

Lastly to disable the EHCI controller using xHCI mode = "Enabled".... is this in bios or in clover configurator?
Click to expand...

No such Clover option.
xHCI mode is BIOS option.
 
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top