Contribute
Register

[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

Status
Not open for further replies.
here attached problem reporting files

Your Clover/kexts/Other is wrong. Guide does not call for USBXHCI_4x40s.kext.
Clover/drivers64UEFI is also wrong. Guide does not call for AptioInputFix.efi.

If you have an issue booting the 10.13.4 installer/updater, you forgot to press F2, and you forgot to attach a verbose boot photo. You will need to describe your problem in detail and provide the requested data.

Your config.plist and ACPI/patched content looks ok.
 
Jack detection issue.
Did you try after a sleep/wake cycle.
You attached no files representing your AppleALC attempt (nor the attempt with reverting the mentioned commit), so no ideas can be provided there.
I tried after sleep wake cycle. Behaviour is still the same.
My Apologies. I am going to attach the files as I go through the different configs.
First up is the current one with the rolled back zlib files.
 

Attachments

  • debug_rolledb_hda.zip
    1.9 MB · Views: 77
I tried after sleep wake cycle. Behaviour is still the same.
My Apologies. I am going to attach the files as I go through the different configs.
First up is the current one with the rolled back zlib files.

Did you also roll back the changes to the model specific SSDT?
 
Did you also roll back the changes to the model specific SSDT?
Yes I did.
I have attached the debugs for both this scenario and the ALC.
 

Attachments

  • debug_commit_ssdt.zip
    2.1 MB · Views: 85
  • debug_ALC.zip
    2 MB · Views: 68
Yes I did.
I have attached the debugs for both this scenario and the ALC.

debug_ALC.zip comments:
- does AppleALC use layout-id 0x14? (your ioreg shows audio not working at all, probably due to incorrect layout-id)
- also you will need to undo all the components of audio patching in the base repo (eg. CodecCommander should be removed, AppleHDA restored to vanilla, AppleHDA patches removed from config.plist)
 
For your post
https://www.tonymacx86.com/threads/...s-in-10-12-sierra.202316/page-94#post-1485104
I get 2 kext AppleIntelFramebufferCapri, AppleIntelFramebufferAzul from /System/Library/Extensions, but I'm can't understand how to make change kext
Can you use image to explain for me?
Thank @
RehabMan

You need to attach "problem reporting" files.
The ioreg should show HDMI connected.

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.
 
debug_ALC.zip comments:
- does AppleALC use layout-id 0x14? (your ioreg shows audio not working at all, probably due to incorrect layout-id)
- also you will need to undo all the components of audio patching in the base repo (eg. CodecCommander should be removed, AppleHDA restored to vanilla, AppleHDA patches removed from config.plist)
I apologise once again, I must have been exhausted or something. I have attached the correct problem files for the AppleALC kext.
It requires layout-id 3. Still no Jack detection though.
 

Attachments

  • debug_26511.zip
    1.9 MB · Views: 84
Status
Not open for further replies.
Back
Top