- Joined
- Mar 17, 2018
- Messages
- 18
- Motherboard
- Asus Vivobook X405
- CPU
- Intel I3-7100u
- Graphics
- Intel HD 620
Hello everyone,
I have been spending the past few days attempting to install Mac.
So far, I have got most things working apart from the touchpad & brightness.
however trackpad is the most important issue. I know my touchpad is ELAN1200 which is covered by VoodooI2C. After editing the DSDT to resolve the GPIO Pinning issue the trackpad still wouldn't work. So I ran
log show --predicate 'process == "kernel"' --start "2017-01-01 00:00:00" on terminal as suggested by the common errors page of the kext to find the issue.
I found the following:
0 kernel: (kernel) VoodooI2CPCIController:ci8086,9d60 Starting I2C controller
2018-03-16 14:15:03.098855-0700 0xcf Default 0x0 0 0 kernel: (kernel) VoodooI2CPCIController:ci8086,9d60 Set PCI power state D0
2018-03-16 14:15:03.099361-0700 0xcf Default 0x0 0 0 kernel: (kernel) VoodooI2CPCIController:ci8086,9d60 Publishing nub
2018-03-16 14:15:03.099401-0700 0xcf Default 0x0 0 0 kernel: (kernel) class: IOPCIDevice
2018-03-16 14:15:03.099485-0700 0xe5 Default 0x0 0 0 kernel: (kernel) class: VoodooI2CPCIController
2018-03-16 14:15:03.119142-0700 0xe4 Default 0x0 0 0 kernel: (kernel) VoodooI2CControllerDriver:ci8086,9d60 Probing controller
2018-03-16 14:15:03.119153-0700 0xe4 Default 0x0 0 0 kernel: (kernel) VoodooI2CControllerDriver:ci8086,9d60 Unknown Synopsys component type: 0xffffffff
2018-03-16 14:15:03.119198-0700 0xe4 Default 0x0 0 0 kernel: (kernel) class: VoodooI2CControllerNub
2018-03-16 14:15:03.119531-0700 0xe2 Default 0x0 0
Upon googling the above unknown synopsys error, I found the following:
https://www.tonymacx86.com/threads/...d-limited-support.204227/page-65#post-1528938
When initially installing High Sierra I used the following guide:
https://www.tonymacx86.com/threads/...sierra-high-sierra-installation-guide.224591/
Which at one stage tells us to apply "Remove _DSM methods" on one of the SSDT's in step 9. I had to do this for SSDT-5-senrhub.dsl . So I am assuming that is the root of the issue. However attempting to compile on MaciASL throws a few errors I have no idea on how to resolve. I have attached the file and the compiler summary. Could someone please help?
Thank you for taking your time reading through this thread. I have put in hours and hours, nearly getting to where I can make this my main OS.
I have been spending the past few days attempting to install Mac.
So far, I have got most things working apart from the touchpad & brightness.
however trackpad is the most important issue. I know my touchpad is ELAN1200 which is covered by VoodooI2C. After editing the DSDT to resolve the GPIO Pinning issue the trackpad still wouldn't work. So I ran
log show --predicate 'process == "kernel"' --start "2017-01-01 00:00:00" on terminal as suggested by the common errors page of the kext to find the issue.
I found the following:
0 kernel: (kernel) VoodooI2CPCIController:ci8086,9d60 Starting I2C controller
2018-03-16 14:15:03.098855-0700 0xcf Default 0x0 0 0 kernel: (kernel) VoodooI2CPCIController:ci8086,9d60 Set PCI power state D0
2018-03-16 14:15:03.099361-0700 0xcf Default 0x0 0 0 kernel: (kernel) VoodooI2CPCIController:ci8086,9d60 Publishing nub
2018-03-16 14:15:03.099401-0700 0xcf Default 0x0 0 0 kernel: (kernel) class: IOPCIDevice
2018-03-16 14:15:03.099485-0700 0xe5 Default 0x0 0 0 kernel: (kernel) class: VoodooI2CPCIController
2018-03-16 14:15:03.119142-0700 0xe4 Default 0x0 0 0 kernel: (kernel) VoodooI2CControllerDriver:ci8086,9d60 Probing controller
2018-03-16 14:15:03.119153-0700 0xe4 Default 0x0 0 0 kernel: (kernel) VoodooI2CControllerDriver:ci8086,9d60 Unknown Synopsys component type: 0xffffffff
2018-03-16 14:15:03.119198-0700 0xe4 Default 0x0 0 0 kernel: (kernel) class: VoodooI2CControllerNub
2018-03-16 14:15:03.119531-0700 0xe2 Default 0x0 0
Upon googling the above unknown synopsys error, I found the following:
https://www.tonymacx86.com/threads/...d-limited-support.204227/page-65#post-1528938
When initially installing High Sierra I used the following guide:
https://www.tonymacx86.com/threads/...sierra-high-sierra-installation-guide.224591/
Which at one stage tells us to apply "Remove _DSM methods" on one of the SSDT's in step 9. I had to do this for SSDT-5-senrhub.dsl . So I am assuming that is the root of the issue. However attempting to compile on MaciASL throws a few errors I have no idea on how to resolve. I have attached the file and the compiler summary. Could someone please help?
Thank you for taking your time reading through this thread. I have put in hours and hours, nearly getting to where I can make this my main OS.