Success - Z370-HD3 i5-8600K - RX 580 Build

[mrpsycho]

@agrajag, have you tried to upgrade to 10.13.3?
could you please upload the whole efi partition?

 

[agrajag]

@agrajag, have you tried to upgrade to 10.13.3?
could you please upload the whole efi partition?

Current EFI attached. I am using RadeonDeInit=true to enable the RX 560 GPU at the moment.

Have upgraded to each final point release using the App Store- haven't had a problem yet.

 

[ashman70]

Thanks, followed your build notes and everything worked out pretty much. Had to figure the audio out but I got some help with that.

 

[niceiceman]

Seemed like worth a try. I installed the new F6g BIOS on my rig, but it doesn't seem to have changed the sleep behaviour from what it was. With Lilu+WhateverGreen it will sleep and wake, but the fans run full on until reboot and the RPM meters in HWMonitor do not register values after waking. If I use the RadeonDeInit method to enable the RX 560, it almost sleeps (power light stays on) and will not wake, so I have to reboot.

I have the same setup installed today... and I have come across with the exact same issue.. the fan goes for full power after reboot.. Do you have any new clue on the situation?

 

[agrajag]

I have the same setup installed today... and I have come across with the exact same issue.. the fan goes for full power after reboot.. Do you have any new clue on the situation?

I haven't made any progress on that but have not been testing things either. Right now I am hoping 10.13.4 might fix it when many cards will be natively supported, including the RX 560. I'm not running the betas though, this is just feedback from some who have tried.

The hope for support without RadeonDeInit or WhateverGreen comes from the upcoming external GPU support. See <https://egpu.io/external-gpu-macos-10-13-4-update/>

 

[niceiceman]

t but have not been testing things either. Right now I am hoping 10.13.4 might fix it when many cards will be natively supported, including the RX 560. I'm not running the betas though, this is just feedback from some who have tried.

Z370 HD3P - CPU fan speed problem after wake up from sleep | GIGABYTE USA Forum

just read another article in the forum, it seems it is a well known bios issue and not just related to mac, but windows as well

 

[monsterz]

Z370 HD3P - CPU fan speed problem after wake up from sleep | GIGABYTE USA Forum

just read another article in the forum, it seems it is a well known bios issue and not just related to mac, but windows as well

I've been dealing with this same issue. There's more on the issue if you refer to my build thread on this post. Currently I haven't found any solution other than a BIOS update, but soon as you touch any sort of setting in the BIOS it brings the issue right back. Hopefully Gigabyte figures this out, but they keep telling the people who contact them that they can't seem to recreate the issue so they don't understand how to deal with the problem, or something of that sort.

 

[niceiceman]

I've been dealing with this same issue. There's more on the issue if you refer to my build thread on this post. Currently I haven't found any solution other than a BIOS update, but soon as you touch any sort of setting in the BIOS it brings the issue right back. Hopefully Gigabyte figures this out, but they keep telling the people who contact them that they can't seem to recreate the issue so they don't understand how to deal with the problem, or something of that sort.

Thanks! The same issue goes with Windows 10 as well...so it is a MB level problem. I have also submitted a technical support ticket to Gigabyte. Lets see how they response.

 

[ashman70]

I am having a weird issue with this build, I am using the IOGear Bluetooth 4.0 Adapter and at the beginning of this build I didn't have any issues, upon reboot at the OSX login screen bluetooth would be active, now it's never active and I usually have to unplug the dongle and plug it back in to reactivate bluetooth. I never had this issue on my previous hackintosh system. Not sure what changed for this to happen.

 

[agrajag]

I am having a weird issue with this build, I am using the IOGear Bluetooth 4.0 Adapter and at the beginning of this build I didn't have any issues, upon reboot at the OSX login screen bluetooth would be active, now it's never active and I usually have to unplug the dongle and plug it back in to reactivate bluetooth. I never had this issue on my previous hackintosh system. Not sure what changed for this to happen.

Have you added Rehabman's Bluetooth kext-- see <https://www.tonymacx86.com/threads/...lug-plug-back-in-at-boot.188337/#post-1668929> (post #9)? This worked for me so Bluetooth is enabled after boot without unplug/replug. I should add this info to my build description.