UniBeast: Install macOS High Sierra on Any Supported Intel-based PC

[Stork]

I don't understand where from i need boot after first reboot after install
1. boot ffom USB - install Hi Sierra
reboot
2. boot from ?????

See Step 4-4 in Post #1.

 

[Mikorist]

I am using clover bootloader, but it’s too hard to install supported audio drivers withouth multibeast. Will I be still able to use clover bootloader once I installed multibeast (when it will be out fpr 10.13) for audio drivers?

You don’t need Multibeast to run ALC892. (have the same chip )


You can got sound with AppleALC and Lilu in EFI/CLOVER/kexts/Other for sure from this motherboard.Also no need for CodecCommander. Everything works from EFI

For assistance with Audio you should post in the Audio forum.

 

[Yomiro]

Had to upgrade from a 99% vanilla Yosemite install. My SSD was dying and finally decided to upgraded to High Sierra.
Upgraded to (UEFI and Clover) from (MBR and Chimera.)

Only issue I had was with USB which was fixed with Clover ACPI USB patches. There is a learning curve with Clover bootloader, but it works so much better than Chimera. CloverACL worked perfectly for audio.

Only downside is my TimeMachine drive stopped working.

 

[DaveTheBlade]

Does this work with NVMe SSDs?

 

[Impy91]

Hi guys I have some problem...I have a msi z270 a pro motherboard and I can’t find other os configuration in the BIOS and when cover starts I can see only windows boot options
What I have to do?
I tried to unplug the ssd with windows but nothing happened
Help pls

 

[TheFox88]

Does this work with NVMe SSDs?

For me it worked on an M.2 SSD.

 

[Stork]

Does this work with NVMe SSDs?

https://www.tonymacx86.com/posts/1670423/

 

[DaveTheBlade]

For me it worked on an M.2 SSD.

https://www.tonymacx86.com/posts/1670423/

Thank you guys. However is there some problem with Maxwell and Pascal gpus? I read this on google. I have to do something with kexts.

 

[Stork]

Thank you guys. However is there some problem with Maxwell and Pascal gpus? I read this on google. I have to do something with kexts.

After you install High Sierra and run MultiBeast, you will need to install the Nvidia drivers. (see Downloads menu for appropriate Nvidia driver).

 

[mark3hack]

For people getting stuck at the booting screen, try removing nv_disable=1 and adding nvda_drv=1. Worked for me. I have a gtx 760

GTX 980 here. Needed to do this to get past the "no go" symbol between step 12 & 13 of install section.