Contribute
Register

[solved] BCM94352Z - UX430UA Sierra 10.12.6 wifi not working

Status
Not open for further replies.
S/L/E folder is not the same as L/E folder. Maybe that is the issue?

Here’s what my main disk partitions look like.

Applications
EFI Backup folder
Library < Extensions >
System < Library/Extensions >
Users

I think this is an area people get confused about and or relay incorrectly. If Rehabman suggested you place them in L/E and you placed them in S/L/E this could explain a failed result. These two Extensions folders work differently and a fix in one may not work in the other folder.

RehabMan is responsible for many, many, hackintosh solutions (not only on this site but many others) that allow “us” end users the ability to run macOS on our systems. When it comes to laptops and other small form factor systems you will be hard pressed to find a more knowledgeable person than he. If you follow his directions and most importantly provide your crash reports “problem reporting” as requested you may be able to find a proper solution for your system but also help others with a similar setup.

Please take a deep breath and relax, this is a friendly site with a positive and a very helpful cast of Members, Moderators, and Admins. Let’s keep hackintosh fun, it can and (in my opinion) should be challenging, but fun and rewarding as well. Try not to take things too personally.
Dude did try both XD those kexts only work in clover/other !!
 
and I can ,make difference between LE/SLE since SLE is only visible after you enable hidden folders !
 
and I can ,make difference between LE/SLE since SLE is only visible after you enable hidden folders !
in terminal:

open /System/Library/Extensions

will open the folder for you
 
in terminal:

open /System/Library/Extensions

will open the folder for you
oh boy and I thought I am crazy ?? Are you blind ? I know where she it docent work this way !!!!!!!
 
oh boy and I thought I am crazy ?? Are you blind ? I know where she it docent work this way !!!!!!!
no, I am not blind, my vision is just great thanks

although I am not sure what it is you are trying to say, would you like to repeat in English?
 
I am trying to say that moving kexts for this wifi card in ether SLE or LE docent work they only work if they are in Clover Other folder stop sending people in to the wrong place did you understand it now or you need translation !!
 
I am trying to say that moving kexts for this wifi card in ether SLE or LE docent work they only work if they are in Clover Other folder stop sending people in to the wrong place did you understand it now or you need translation !!
I have the same card, the kexts work fine in /Library/Extensions

But as you keep failing to upload your problem reporting files, then no one is't going to be able to help you

so calm down and upload your files
 
I am trying to say that moving kexts for this wifi card in ether SLE or LE docent work they only work if they are in Clover Other folder stop sending people in to the wrong place did you understand it now or you need translation !!

This may be true for you and your system configuration. What works for you may or may not work for others. If it's working that's good you should be happy.
 
I had troubles with wifi, laptop is also Asus, but bit bigger N752VX.
Updated lately Sierra to the last 10.12.6 version and by the same as well Clover boot loader.
For surprise wifi did not work anymore. Took hours to find out the problem and there is the
conclusion, don’t never install multiple things at same, always do step by step…
Actually Sierra update did not break anything, seems Clover has a bug, but it wasn’t my first
suspicion.
My BCM94352Z works so far with these 4 common Sierra patches + fakeiids (early worked well with Clover r4035 boot loader). Now I did install latest Clover r4359 and wifi not worked anymore (wifi icon on the titlebar informed that wifi hardware not installed). Started test step by step early boot loader versions, like r4334, r4330 - no progress, nothing worked.
After installation of Clover r4297 my wifi started work again. Obviously there is bug inside of the
newer boot loaders … or it’s just the bad luck of combination Clover + hardware (bios + wifi card), but
from the other hand nothing was left to test, laptop runs already latest bios….
Does anyone met also similar behaviour ? That boot loader update broke wifi ?
So, just for information, if anyone struggling with non-working wifi, it will be also good to test different Clover versions.
Attached screenshot from my wifi card ident. Now BCM94352Z works with Clover r4297.

Edit. Kexts were always installed S/L/E (also now).
 

Attachments

  • Screen Shot 2017-12-29 at 05.49.01.png
    Screen Shot 2017-12-29 at 05.49.01.png
    70.9 KB · Views: 142
Last edited:
I had troubles with wifi, laptop is also Asus, but bit bigger N752VX.
Updated lately Sierra to the last 10.12.6 version and by the same as well Clover boot loader.
For surprise wifi did not work anymore. Took hours to find out the problem and there is the
conclusion, don’t never install multiple things at same, always do step by step…
Actually Sierra update did not break anything, seems Clover has a bug, but it wasn’t my first
suspicion.
My BCM94352Z works so far with these 4 common Sierra patches + fakeiids (early worked well with Clover r4035 boot loader). Now I did install latest Clover r4359 and wifi not worked anymore (wifi icon on the titlebar informed that wifi hardware not installed). Started test step by step early boot loader versions, like r4334, r4330 - no progress, nothing worked.
After installation of Clover r4297 my wifi started work again. Obviously there is bug inside of the
newer boot loaders … or it’s just the bad luck of combination Clover + hardware (bios + wifi card), but
from the other hand nothing was left to test, laptop runs already latest bios….
Does anyone met also similar behaviour ? That boot loader update broke wifi ?
So, just for information, if anyone struggling with non-working wifi, it will be also good to test different Clover versions.
Attached screenshot from my wifi card ident. Now BCM94352Z works with Clover r4297.

Edit. Kexts were always installed S/L/E (also now).

No bug in Clover. Change in Clover is intentional.
Name=AirPortBrcm4360 will not work, must be com.apple.driver.AirPort.Brcm4360
 
Status
Not open for further replies.
Back
Top