Contribute
Register

My new hackintosh restart after shut down

Status
Not open for further replies.
I've tried and here the strange result:
PLCFAb.jpg

Is CsrActiveConfig set to 0x67? If so try OsxAptioFixDrv2.
 
Is CsrActiveConfig set to 0x67? If so try OsxAptioFixDrv2.

Thank you for the answer... Eventually I've formatted everything and installed macOS on a SSD disk, it seems that it was very tricky to get NVME boot, anyway now the system is pretty stable and I can also access to my NVME disk.
 
Thank you for the answer... Eventually I've formatted everything and installed macOS on a SSD disk, it seems that it was very tricky to get NVME boot, anyway now the system is pretty stable and I can also access to my NVME disk.

NVMe is not natively supported.
 
Hi everyone.
I have just built my first hackintosh and i still have a problem to slove.
I hope someone can help me.
My problem is that the system reboot again shortly after power off (after 3 seconds).
My setup is as follows:
Gigabyte GA-Z170X-DESIGNARE Mainboard (with BIOS version update F22)
Intel Core i7-6700K Prozessor
Gigabyte GeForce GTX 980 Ti
Crucial Ballistix Sport LT (32GB)
macOS Sierra Version 10.12.5
NVIDEA Web Driver
Clover V.2.4 EFI bootloader


I'm having the same issue.

I clicked "FixShutdown004" in clover config but no luck.

When I click shutdown the computer and fans keep running, goes to black screen then kicks into reboot.
 
I'm having the same issue.

I clicked "FixShutdown004" in clover config but no luck.

When I click shutdown the computer and fans keep running, goes to black screen then kicks into reboot.

I had this problem before. I used Clover Configurator and simply checked the box next to "FixShutdown." It worked for some time, but then I was trying to get dual-monitors working and messed something up. Now, even though the "FixShutdown" box is still checked, my hack has started to do the "auto reboot" again... o_O
 
I installed 10.13.2 yesterday and for the first time since I had a hackintosh I experienced this problem. Basically my computer stops for a few seconds and then starts again.
FixShutdown didn't work for me. I disabled wake on lan function and now shutdown works for me.
 
I installed 10.13.2 yesterday and for the first time since I had a hackintosh I experienced this problem. Basically my computer stops for a few seconds and then starts again.
FixShutdown didn't work for me. I disabled wake on lan function and now shutdown works for me.
I disabled "Wake for Network Access" in Mac System Settings and also in the BIOS of my GA-H170N-WIFI motherboard. I still have this problem. Have to flip the power-off switch on my power strip to disconnect it while it's still off (and prevent the auto reboot).
 
@andreidelait, please update your profile (personal details) with your Motherboard, CPU and Graphics Card.
If you have a prebuilt computer enter make and model instead of motherboard (Mobo).
The Rules said:
Profiles need to contain at least your primary system to assist others with helping you.
 
Gigabyte z370 board here. Shutdown would actually reboot in OSX. Fix_Shutdown didn't work, but editing the clover config file in notepad and changing it to Fix_Shutdown_0004 fixed the problem. However my motherboard LEDs stay lit while shutdown, as well as my keyboard.
 
@yoshisakan, please update your profile (personal details) with your Motherboard or Make/Model, CPU and Graphics Card.
The Rules said:
Profiles need to contain at least your primary system to assist others with helping you.
 
Status
Not open for further replies.
Back
Top