Contribute
Register

GA-Z270X-UD5 - i7-7700K - HD 630 - 16Gb ram - M.2 NVME - ALC1220 - BCM943602CS

Status
Not open for further replies.
Thanks for the reply Ben, yes I can go to bios with only one ram installed, but I was wondering why not with 2 rams $250 a piece, I am just hoping I can just pop it in after my os is running
 
View attachment 301384 Hi there, I just started my build last night, I am using the same mother and cpu, for some reason I can’t boot to bios when I have 2x16gb ram ballistic sport installed it goes to boot loops after 5 beeps, I have tried many different combinations. I tried both of them on the same slot (one at the time) and it works, so I am pretty sure both rams are in working order. Does anyone experienced the same problem. This is my first build ever so any advice it will be greatly appreciated.

Didi you bend socket pins during cpu installation?? if you don't know or didn't check specially the socket, do it, one bent pin can cause that issue. Use a magnifying glass and if you find any bent pin you can carefully bend those back with a small pin. You just have to be careful and patient, i've been in that road with the z270x-ud5 with the same symptoms.
 
Y
Didi you bend socket pins during cpu installation?? if you don't know or didn't check specially the socket, do it, one bent pin can cause that issue. Use a magnifying glass and if you find any bent pin you can carefully bend those back with a small pin. You just have to be careful and patient, i've been in that road with the z270x-ud5 with the same symptoms.
you mean the pin on the board? Ouch! I hope not. I did it with lots of caution. But I will take a look at it. Thank you
 
0659B4FC-E36B-4693-B471-5C1B213FB5EE.jpeg
Yes, in the socket

No luck :(
I am returning my ram and ordering Corsair Vengance instead
 
Is there any progress with 10.13 here ?

I want to buy that board . There are more users uses this board that mines

Instaead of the m2 SSD i use a normal sata ssd from samsung.
-> can i only drop the part of the guide with th m2 ssd ?

First i use the HD630 . Later my GTX660Ti .
-> Which changes i have to made ?

-> is there a difference for the CPU i5-7600 ?

Thanks for helping
 
Hi! Did you work now at Sleep/Wake ?
 
@GBeckman, can you update this build to 10.13? I've been nervous about upgrading it. I have-- pretty much-- your exact build (but with a GTX 980ti).
 
@GBeckman, can you update this build to 10.13? I've been nervous about upgrading it. I have-- pretty much-- your exact build (but with a GTX 980ti).

I'm running 10.13.6 on very similar build (with a 980ti) without any issues.
 
Status
Not open for further replies.
Back
Top