[Guide] Acer TravelMate X349-M-535L

[jackharvest]

Shout out to your guide from my build progress here. Thank you so much!

 

[krandv]

I've upgraded to 10.12.6 and WiFi stopped working. The originally referenced guide https://www.tonymacx86.com/threads/guide-airport-pcie-half-mini-v2.104850 seems to get rewritten. Following the new guide I installed FakePCIID.kext and FakePCIID_Broadcom_WiFi.kext from https://bitbucket.org/RehabMan/os-x-fake-pci-id/downloads to /S/L/E, rebooted and WiFi started working again.

Added edits to the guide in the first post.

 

[krandv]

Native PM seems to stopped working too. Will be checking this later

 

[RehabMan]

I've upgraded to 10.12.6 and WiFi stopped working. The originally referenced guide https://www.tonymacx86.com/threads/guide-airport-pcie-half-mini-v2.104850 seems to get rewritten. Following the new guide I installed FakePCIID.kext and FakePCIID_Broadcom_WiFi.kext from https://bitbucket.org/RehabMan/os-x-fake-pci-id/downloads to /S/L/E, rebooted and WiFi started working again.

Added edits to the guide in the first post.

Native PM seems to stopped working too. Will be checking this later

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[krandv]

RehabMan, I appreciate your reaction, sorry if I've been not clear in my post. I don't need any help at the moment. My intention was to put the records for anyone who might read or watch this thread.

 

[RehabMan]

RehabMan, I appreciate your reaction, sorry if I've been not clear in my post. I don't need any help at the moment. My intention was to put the records for anyone who might read or watch this thread.

OK, but native CPU PM is easy (can be done with simple setting in config.plist).
Read here:
https://www.tonymacx86.com/threads/guide-native-power-management-for-laptops.175801/

 

[krandv]

Hi, RehabMan, today I tried to connect 4K display via HDMI, but no luck. It works correctly in Windows, but there is an external display in System Preferences.
I didn't find any mentions about this problem in the base guides, so I assume it should work OOB, shouldn't it?

Attached the problem reporting files

 

[RehabMan]

Hi, RehabMan, today I tried to connect 4K display via HDMI, but no luck. It works correctly in Windows, but there is an external display in System Preferences.
I didn't find any mentions about this problem in the base guides, so I assume it should work OOB, shouldn't it?

Attached the problem reporting files

Your ioreg shows no connected external display.
Also, both of the external connectors (@1 and @2) are connector-type DP <00 04 00 00>.
For HDMI 4k, must patch the framebuffer such that the connector-type indicates HDMI <00 08 00 00>.

 

[krandv]

Yes, I noticed all of the mentioned issues. Can the external display be missed because of connector-type DP?
Could you point me the thread where I could read about patching the connector-type?

I've read the following guide https://www.tonymacx86.com/threads/...o-sandy-ivy-haswell-broadwell-skylake.189495/

but didn't get where do you take values like 0105, 0204, 0306, 87000000 from and what values I should use for the patch.

If you followed the guide here: https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/...

Your config.plist will already contain the renames required.

I used the following config.plist https://github.com/RehabMan/OS-X-Clover-Laptop-Config/blob/master/config_HD520_530_540.plist

but it doesn't contain any renames that would relate to connector-type

 

[krandv]

del