[Guide] Lenovo ThinkPad T440P

[kingduglu]

You will want to document each active SSPx and HSxx port regarding their location and relation.

sorry I don't really understand :/

 

[RehabMan]

sorry I don't really understand :/

When you plugin each type of device, pay attention to the changes in ioreg so you know which HSxx/SSPx identifiers are associated with each port.

It will be required to set the UsbConnector values correctly, especially since you seem to have a mix of USB3 and USB2-only ports (looks like maybe you have 2x USB3, and 2x USB2-only).

 

[CarlosRoas]

hi Sniki!
First of all, i would like to give you thanks (Rehabman too) for this great guide. I have been used it for my T440p and it works flawless.
My specs are: t440p - i5 4300M - HD4600 (No Nvidia) - 1600x900 - 12GB RAM 1600 - BIOS 2.24 - 10.12.6
I have been using all your guide files and config.plist from #93 post and SSDT-T440P.aml from #91 post.

i have t440p intel wifi+bt combo card and I´d like to add broadcom wifi+bluetooth combo card in future..but i have two questions in this area...now i use a anewkodi wifi ac for wireless conecction.

i have bios 2.24...the lastest bios for t440p is 2.44.
Can i get a modded 2.44 bios with removed whitelist and advance menu unlocked and upgrade from 2.24 without soldering bios rom chip?

another issue...
Intel bluetooth from original t440p combo card works sometimes....it´s detected 50%...when it´s detected, it works flawless...but sometimes bluetooth is not recognized by Sierra...What can i do to solve this?..if it works sometimes it should be works all time.

By the way, Sniki...do you have newer config.plist or newer ssdt-t440p.aml files than #91 and #93 post?

Again...Thank you so much!

 

[kingduglu]

When you plugin each type of device, pay attention to the changes in ioreg so you know which HSxx/SSPx identifiers are associated with each port.

It will be required to set the UsbConnector values correctly, especially since you seem to have a mix of USB3 and USB2-only ports (looks like maybe you have 2x USB3, and 2x USB2-only).

you were right haha... HS03 is I think like a high voltage thingy.. idk if it matters but just fyi... anyway appreciate my artistic masterpiece ;P

 

[lighting2]

Is the path of patch correct?

efi/clover/patched
or
EFI/CLOVER/ACPI/patched

this is basic config for having QE/CI ?
I just want to have QE/CI after install macos success
.

EFI/Clover/ACPI/patched is where Clover loads ACPI files.

and the second question

 

[RehabMan]

and the second question

Second question is nonsense. No idea what you're asking.

 

[lighting2]

Hey, I'm using t540p too. Everything working now after I wasted like 40 hours trying by my own. However with ur tutorial I got it working now... just the USB ports aren't working at all as you have already predicted. How can I fix them?

Hi bro,
I'm using thinkpad t540p too
CPU: i5-4300M
Intel HD 4600
RAM 12GB ( 8GB+ 4GB)
SSD TOSHIBA 256GB + 500GB HDD Western

I created USB success, and install success ( but I have to change to invalid FakeID/IntelGFX to get installation success 0x12345678)
and then
I installed clover into HDD (500GB westen at cardy bay slot) and boot success ( but same with installation step, I have to change to invalid fake id to bootable to desktop, and Intel HD 4600 have only 7MB)
( I copy all patched and kexts necessary to folder in HDD already),
have tried using config.plist of this thread guideline

but when I boot with valid fake id 0x04128086,
+ with inject EDID true => always get system restart
+ with inject EDID false => always get black screen after few minutes



I just want to ask how to I get full Intel HD 4600 performance


Could you help me via skype (nguyenminh_asp),
sorry for my bad english
thanks very much

here is log of 2 case: EDID true and EDID false (BOOT from clover from HDD)


Please help me!

@RehabMan
@Sniki

some image of bios

 

[RehabMan]

Hi bro,
I'm using thinkpad t540p too
CPU: i5-4300M
Intel HD 4600
RAM 12GB ( 8GB+ 4GB)
SSD TOSHIBA 256GB + 500GB HDD Western

I created USB success, and install success ( but I have to change to invalid fake ID to get installation success 0x12345678)
and then
I installed clover into HDD (500GB westen at cardy bay slot) and boot success ( but same with installation step, I have to change to invalid fake id to bootable to desktop, and Intel HD 4600 have only 7MB)
( I copy all patched and kexts necessary to folder in HDD already),
have tried using config.plist of this thread guideline

but when I boot with valid fake id 0x04128086,
+ with inject EDID true => always get system restart
+ with inject EDID false => always get black screen after few minutes



I just want to ask how to I get full Intel HD 4600 performance


Could you help me via skype (nguyenminh_asp),
sorry for my bad english
thanks very much

here is log of 2 case: EDID true and EDID false (BOOT from clover from HDD)


Please help me!

@RehabMan
@Sniki

some image of bios

Never use invalid FakeID.
Only use invalid ig-platform-id.

Make sure you can boot with working graphics using stock ACPI configuration before trying to patch.
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

 

[lighting2]

Never use invalid FakeID.
Only use invalid ig-platform-id.

Make sure you can boot with working graphics using stock ACPI configuration before trying to patch.
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

As I said, susscess boot with invalid FakeID => HD intel 4600 (having 7MB)
I cannot boot with valid FakeID
Please check what wrong in my Clover folder ?

 

[lighting2]

As I said, susscess boot with invalid FakeID => HD intel 4600 (having 7MB)
I cannot boot with valid FakeID
Please check what wrong in my Clover folder ?

even when I haven't copy patch to clover folder yet
the problem exact the same