[Success] High Sierra-Asus Z270G Strix-i7 7700-Asus GTX 1060

[jamiewoods]

Thank you very much
What kexts do you have in the clover folder?
Since I don’t have graphic card right now so I got problem when I using igfx

This is what I got when I use your configuration with my kext

I don't have any kexts in the Clover folder. The ZIP file you have is exactly what's there. If you don't have a graphics card installed and using the mobo HDMI port, then you will run into problems. I tested plugging the monitor into the mobo HDMI port with my graphics card installed, and when I did it, the system failed to boot, which might be the same issues you're dealing with.

 

[terrytwomail]

I don't have any kexts in the clover folder. The ZIP file you have is exactly what's there. If you don't have a graphics card installed and using the mobo HDMI port, then you will run into problems. I tested plugging the monitor into the mobo HDMI port with my graphics card installed, and when I did it, the system failed to boot, which might be the same issues you're dealing with.

Yes, exactly, I use DisplayPort, and it failed to boot. I boot successfully once with flag -disablegfxfirmware but it failed again when I edit my config file with Clover Configurator. May be I should now get a GTX.
BTW, why don't we need FakeSMC to boot?

 

[jamiewoods]

Yes, exactly, I use DisplayPort, and it failed to boot. I boot successfully once with flag -disablegfxfirmware but it failed again when I edit my config file with Clover Configurator. May be I should now get a GTX.
BTW, why don't we need FakeSMC to boot?

I'm not sure why it's crashing when using the mobo display ports, but it might pay to get a GTX if you plan on using for video production or games. I'm also not sure about the FakeSMC to boot. I just followed the guide in hope it would all work out.

 

[MrPunk2u]

omg your clover folder just saved me hours of searching around
Thank you so much!

 

[jamiewoods]

omg your clover folder just saved me hours of searching around
Thank you so much!

Glad I could help..

 

[terrytwomail]

I'm not sure why it's crashing when using the mobo display ports, but it might pay to get a GTX if you plan on using for video production or games. I'm also not sure about the FakeSMC to boot. I just followed the guide in hope it would all work out.

Yes! finally I finish my installation and now using high sierra. Just fix my iMessage now I am so happy. I followed the guidance made by Psyvire about how to enable hd630 but now I still need -disablegfxfirmware to boot. I guess my previous failure was about clover config and clover version. This time I use UniBeast 8.1.1 to generate my installation disk and everything work fine.

https://www.tonymacx86.com/threads/how-to-enable-kaby-lake-intel-6xx-graphics-10-12-6.225282/page-17

But for sound card I think your clover doesn't work for me so I just use voodooHDA.kext to fix it.
now my following step is to generate a DSDT file. Wondering if someone already have it.

 

[piff78]

I have exactly the same mobo, with the aerial connected, but the Bluetooth still not working.

Actually I can see it on the USB Device Tree :

But the Bluetooth toolbar doesn't use it :

I think I've broken it when I've tried to fix the Bluetooth issue without the aerial connected.

Maybe I can fix it if you send me your
IOBluetoothHIDDriver.kext
and
IOBluetoothFamily.kext
inside : /System/Library/Extensions

I remember replacing them with original kext from a real MacBook Pro... Bad idea...

 

[terrytwomail]

I have exactly the same mobo, with the aerial connected, but the bluetooth still not working.

Actually I can see it on the USB Device Tree :

But the Bluetooth toolbar doesn't use it :

I think I've broken it when I've tried to fix the bluetooth issue without the aerial connected.

Maybe I can fix it if you send me your
IOBluetoothHIDDriver.kext
and
IOBluetoothFamily.kext
inside : /System/Library/Extensions

I remember replacing them with original kext from a real Macbook Pro... Bad idea...

 

[jamiewoods]

I have exactly the same mobo, with the aerial connected, but the bluetooth still not working.

Actually I can see it on the USB Device Tree :

But the Bluetooth toolbar doesn't use it :

I think I've broken it when I've tried to fix the Bluetooth issue without the aerial connected.

Maybe I can fix it if you send me your
IOBluetoothHIDDriver.kext
and
IOBluetoothFamily.kext
inside : /System/Library/Extensions

I remember replacing them with original kext from a real MacBook Pro... Bad idea...

Hey there, here are the kext files. My only issue with Bluetooth was not having the aerial connected. Other than that it's worked fine. I did have to completely re-install my system last week after a failed upgrade attempt, but after using the latest UniBeast, I had no issues with Bluetooth, as long as the aerial is plugged in

 

[idragon81]

I have a similar build as yours, however my Bluetooth isn't being detected at all.
Can you tell me what is it being detected as. I think you can find out what it is in the System Information