- Joined
- Dec 25, 2015
- Messages
- 321
- Motherboard
- Gigabyte Z690 UD AX
- CPU
- i5-12400F
- Graphics
- Readon RX 6600
- Mobile Phone
After working flawlessly with Sierra for some time, today I decided to clean install High Sierra. So I used Unibeast 8.1 with nvidia web drivers true to make a bootable flash drive.
I formatted the installation drive with AFPS file system and installed high sierra. But I'm not able to boot for the first time yet. I'm getting gIOScreenLockState 3 error repeatedly.
And when I disable InjectIntel I get this but its respawning after 7-10 seconds.
My config is:
Mobo: GA-Z97X-UD3H
CPU: Intel Core i5 4690
Graphics: MSI GeForce GTX 1050 Ti 4GT OC
RAM: Kingston HyperX 8GB
Storage: Samsung 750 EVO 120GB SSD & Seagate Barracuda 2TB SATA.
I should mention that I already installed UEFI Windows 10 on a part of SSD.
Now Things I have tried:
1. Disabling InjectIntel from colver options.
2. Mac defination 14,2 to 15,1
3. Replace nv_disable=1 with nvda_drv=1
But no luck so far.
What I have been missing? Thanks in advance.
I formatted the installation drive with AFPS file system and installed high sierra. But I'm not able to boot for the first time yet. I'm getting gIOScreenLockState 3 error repeatedly.
And when I disable InjectIntel I get this but its respawning after 7-10 seconds.
My config is:
Mobo: GA-Z97X-UD3H
CPU: Intel Core i5 4690
Graphics: MSI GeForce GTX 1050 Ti 4GT OC
RAM: Kingston HyperX 8GB
Storage: Samsung 750 EVO 120GB SSD & Seagate Barracuda 2TB SATA.
I should mention that I already installed UEFI Windows 10 on a part of SSD.
Now Things I have tried:
1. Disabling InjectIntel from colver options.
2. Mac defination 14,2 to 15,1
3. Replace nv_disable=1 with nvda_drv=1
But no luck so far.
What I have been missing? Thanks in advance.