AppleHDA Realtek Audio [Guide]

[toleda]

choice is available on the panel but no sound output

Working, user error; post to No Sound - AppleHDA Realtek Audio

Do you think the CloverALC or MultiBeast method can fix this digital out issue?

All 3 methods use the same files, only difference is the installation method.

 

[vshk]

Thanks for the information. Then I know it won't make any difference even I try other two methods. In fact I did test the CloverALC and it really can't help!

 

[toleda]

In fact I did test the CloverALC and it really can't help!

See No Sound - AppleHDA Realtek Audio/Post #1/Problem Reporting. Post to thread linked with requested files attached.

 

[vshk]

See No Sound - AppleHDA Realtek Audio/Post #1/Problem Reporting. Post to thread linked with requested files attached.

Just posted to the thread. Many thanks!

 

[hackmefrancis]

Hi,

Thanks for this guide, I was able to make my sound working. I have the Asus Z170i Pro Gaming motherboard. I followed this IX. Unsupported/Non-working AppleHDA Realtek Audio because I have a 100 chipset.
My audio is working fine with the Internal Speaks (Built-in) only and have a static sound after some time of inactivity in the system.

I also have the Digital Out -Optical but it is not working, nor my HDMI audio. Any guide on how to make the Optical working or better the HDMI audio of my RX460 GPU?

 

[toleda]

Digital Out -Optical but it is not working, nor my HDMI audio

Optical is working, setup problem; see No Sound - AppleHDA Realtek Audio/Post #1/Problem Reporting. Post to thread linked with requested files attached.

HDMI audio: AppleHDA HDMI Audio/Post #1/cloverHDMI

 

[hackmefrancis]

Optical is working, setup problem; see No Sound - AppleHDA Realtek Audio/Post #1/Problem Reporting. Post to thread linked with requested files attached.

Ok, so I tried again and it is indeed working but without volume controls. Is this expected?

 

[toleda]

Is this expected?

Yes, System Preferences:
"Settings for the selected device:"
"The selected device has no output controls"

 

[ocazus]

Prior to attempting this process I had no audio at all (no output options showed up in Sound system preferences), but YouTube video would play -- obviously with no sound, as well as QuickTime .mov/.mp4 video files.

Weirdly, after running this process:
- Copy latest AppleALC.kext into EFI/CLOVER/kexts/Other
- Ensure Lilu.kext is was also in EFI/CLOVER/kexts/Other
- Execute audio_cloverALC-130_v0.3.command in Terminal

I now DO have options in Sound system preferences and I even have Volume Control via the keyboard.

BUT now YouTube no longer plays, and same issue with QuickTime .mov/.mp4 files and .mp3 — none of them play either.

By that I mean if you hit Play nothing happens. No progress. You can scrub back and forth, but the files never begin to Play back.

Here are my config.plist audio-related screens that changed after running the script.

Any thoughts about this? Could it be a Codec related thing?

 

[toleda]

none of them play

Missed Post #1/Installation: ....Select one method, remove before installing another method; 2 methods installed, no audio possible
Missed Post #1/Support: see IV. Problem Reporting
Missed Post #1/IX. Unsupported/Non-working AppleHDA Realtek Audio - 100/200 Series
Audio ID: 2 is not correct for your motherboard, use 1
Post to one of the Problem Reporting threads, off topic.