- Joined
- Sep 28, 2017
- Messages
- 50
- Motherboard
- GIGABYTE GA-Z170X-Gaming 6
- CPU
- i7 7700
- Graphics
- Radeon ROG 560 4gb
- Mac
- Mobile Phone
Hey guys well I was struggling for 3 weeks on how to get my hackintosh up in running, the main problem was my video drivers they just didn't work, I tried 1050ti 1060ti, Radeon 550 and geforce 210 witch did work but was kinda laggy until i switch to to Radeon ROG 560 and it work flawlessly.
This is my setup Components
1. Gigabyte Gaming 6
2. 8GB Ballistic Sport
3. I7 7700
4. Radeon ROG 560 4gb
Bios Settings
1.Disable VTD
2.Enable XHCI handoff **will be on USB components.
3. Disable Super IO
4. Windows and other OS--Other OS
5. MAKE SURE YOU ENABLE BOOT FROM USB FROM BIOS AFTER COMPLETING SETUP YOU COULD CHANGE TO HARD DRIVE
Installation
Step 1. Make bootable USB with Unibeast don't add drivers or anything
2. Once completed make sure you enable boot from USB via Bios
3. once clover comes up install High Sierra from USB FYI it wont be a full on going installation It will restart couple of times but the first step is to install from USB and after it does the first restart boot from the partition that says High Sierra FYI it will do it like 3 time just keep booting from installation partition not USB.
4. Once completed make sure you install multibeast and make sure you do UEFI partition and install drivers.
Sound Universal-Voodo 2.8
Ethernet--Intel-Intelmausit 2.2
USB-enable 3.0 and also enable more connections to it **it should be the last option on list**
Bootloaders-Make sure you clilck on the watevergreen box and as for sistem definition IMAC 18.2 or 18.3 once completed install it on hard drive, Restart and on BIos boot from that EUFI partition and you are all set No video drivers needed your should be all set and ready to go. I CONSIDER THIS BUILD A GOLDEN BUILD since i have no problems and everything seems to work flawlessly . Will be updating a video shortly.
This is my setup Components
1. Gigabyte Gaming 6
2. 8GB Ballistic Sport
3. I7 7700
4. Radeon ROG 560 4gb
Bios Settings
1.Disable VTD
2.Enable XHCI handoff **will be on USB components.
3. Disable Super IO
4. Windows and other OS--Other OS
5. MAKE SURE YOU ENABLE BOOT FROM USB FROM BIOS AFTER COMPLETING SETUP YOU COULD CHANGE TO HARD DRIVE
Installation
Step 1. Make bootable USB with Unibeast don't add drivers or anything
2. Once completed make sure you enable boot from USB via Bios
3. once clover comes up install High Sierra from USB FYI it wont be a full on going installation It will restart couple of times but the first step is to install from USB and after it does the first restart boot from the partition that says High Sierra FYI it will do it like 3 time just keep booting from installation partition not USB.
4. Once completed make sure you install multibeast and make sure you do UEFI partition and install drivers.
Sound Universal-Voodo 2.8
Ethernet--Intel-Intelmausit 2.2
USB-enable 3.0 and also enable more connections to it **it should be the last option on list**
Bootloaders-Make sure you clilck on the watevergreen box and as for sistem definition IMAC 18.2 or 18.3 once completed install it on hard drive, Restart and on BIos boot from that EUFI partition and you are all set No video drivers needed your should be all set and ready to go. I CONSIDER THIS BUILD A GOLDEN BUILD since i have no problems and everything seems to work flawlessly . Will be updating a video shortly.