Contribute
Register

Intel UHD 620 graphics

Status
Not open for further replies.
I installed Lilu.kext IntelGraphicsFixUp.kext FakePCIID.kext FakePCIID_.kext and FakePCIID_Intel_HD_Graphics.kext then i used Fake ID for IntelGFX (0x19168086) and put 0x19160000 for the ig-platform-id

dont forget to reboot with an invalid platform id (0x12345678)
run sudo kext cache -u /
then reboot with the valid id (0x19160000)

It worked. Thank you!
Btw you could also spoof kabylake with IntelGFX (0x59168086) as the Fake ID and 0x59160000 as the platform-id with post #1523 here : https://www.tonymacx86.com/threads/...x-lts-long-term-support-guide.213141/page-153
Also thanks Rehabman.
 

This ioreg shows Skylake spoofing.
eg. FakeID=0x19168086, ig-platform-id=0x19160000.

You should also be able to use FakeID=0x59168086, ig-platform-id=0x59160000 with appropriate modifications to FakePCIID_Intel_HD_Graphics.kext.
 
This ioreg shows Skylake spoofing.
eg. FakeID=0x19168086, ig-platform-id=0x19160000.

You should also be able to use FakeID=0x59168086, ig-platform-id=0x59160000 with appropriate modifications to FakePCIID_Intel_HD_Graphics.kext.
sorry i shouldve booted with it switched

but when i try to boot with those ids i can't get to the login screen i go to a black screen and when i boot using verbose i doesnt show anything useful just loops between the photo i attached (sorry about the quality for some reason fn10 wasnt working) and just a black screen


i did modify the info.plist for FakePCIID_Intel_HD_Graphics.kext
 

Attachments

  • 20171113_104550_HDR.jpg
    20171113_104550_HDR.jpg
    3.5 MB · Views: 1,176
  • info_plist.png
    info_plist.png
    153.4 KB · Views: 1,120
i believe i got it working

i added a HECI to IMEI, SAT0 to SATA patch and now i am able to boot fine with kaby lake id

thank you RehabMan
 
Last edited:
sorry i shouldve booted with it switched

but when i try to boot with those ids i can't get to the login screen i go to a black screen and when i boot using verbose i doesnt show anything useful just loops between the photo i attached (sorry about the quality for some reason fn10 wasnt working) and just a black screen


i did modify the info.plist for FakePCIID_Intel_HD_Graphics.kext

Not possible to tell what you're doing with that image.
Upload your FakePCIID_Intel_HD_Graphics.kext.
Also, you must attach EFI/Clover (as per problem reporting in FAQ).

i believe i got it working

i added a HECI to IMEI, SAT0 to SATA patch and now i am able to boot fine with kaby lake id

thank you RehabMan

HECI -> IMEI is already present in the guide plists.
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

No idea why you would remove it.
 
i dont know why i did either tbh
and after getting back home kaby lake id does not work :(

i attached the files, this time when i try to boot with KBL ids it causes a kernel panic and reboots

Not possible to tell what you're doing with that image.
Upload your FakePCIID_Intel_HD_Graphics.kext.
Also, you must attach EFI/Clover (as per problem reporting in FAQ).



HECI -> IMEI is already present in the guide plists.
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

No idea why you would remove it.
 

Attachments

  • Files.zip
    3.2 MB · Views: 282
i dont know why i did either tbh
and after getting back home kaby lake id does not work :(

i attached the files, this time when i try to boot with KBL ids it causes a kernel panic and reboots

This patch "0x59160000, 80MB framebuffer 12MB cursor bytes (credit RehabMan)" requires 128mb DVMT-prealloc.
Make sure you set DVMT-prealloc to 128mb in BIOS.
 
Status
Not open for further replies.
Back
Top