THUNDERBOLT 3 SUCCESS!! GA-Z170X-UD5 TH STARTECH "Thunderbolt 3 to Thunderbolt adapter"

[matey]

Original from Apple.

 

[Applementalist]

Have someone of you updated the Bios to F20 ?

The settings are different now with the name etc...

I get it not working either in Win10 or Sierra. I have updated TB3 to the latest Firmware.

 

[matey]

Yes, i use it daily without any problems.

 

[matey]

I did not follow any guide, it works OOB. I'm using it for my Display.

 

[matey]

I followed skylake guid from tonymacx86.

 

[macdoc5]

One more thing to try; my setup requires me to boot into Windows first (with the hardware plugged in) and then reboot (not shutdown) into OSX for my Thunderbolt to Firewire adaptor to work.

 

[MacPack]

Sorry for kicking up an oldish thread. I've tried searching but could not find.

Would it be possible to "activate" thunderbolt via Linux instead of Windows?

Thanks

 

[Alexilgatto]

Peripherals -> Intel(R) Thunderbolt ->
Intel Thunderbolt Technology = Enabled
ThunderBolt Boot Support = Disabled
Security Level = Unique ID
Thunderbolt PCIe Cache-line Size = Change to 128
Ignore Thunderbolt Option Rom = Disabled
Thunderbolt SwSMI Delay = Change to 10
TBT Device IO resource Support = Enabled
Reserved Memory = Medium
Reserved Mem per phd slot = 32
Reserved Poem per phi slot = 32

Hi Papillon and all. Seems that my bios (F22a) does not have these entries. Anyway TB3 worked on El Capitain but now in Sierra there's no way to make it work. I use the apple adapter, Sierra 10.12.6 and patched everything with windows. Any suggestions?
Thanks!
A.

 

[MrMusic]

One more thing to try; my setup requires me to boot into Windows first (with the hardware plugged in) and then reboot (not shutdown) into OSX for my Thunderbolt to Firewire adaptor to work.

NEW --- INTEL THUNDERBOLT SOFTWARE / DRIVER VERSION 16.3.61.275 WHQL

JHL6240 Series - "Alpine Ridge LP"
https://www.necacom.net/index.php/i...thunderbolt-software-version-16-3-61-275-whql

download link

https://downloadmirror.intel.com/264...6.3.61.275.zip

 

[Ultramagnus]

I got my TB3 working after following the steps by papillion12 at the top of this thread, but I still can't figure out how to get hotswaping to work. I'm using my TB3 port for my MOTU 828es thunderbolt 2 audio interface (with the Apple TB2 to TB3 adpater). The only way to get my Hack to see the 828es is turn it on first before starting up the computer, and sometimes that doesn't even work and I have to restart the computer again. If I turn off the 828es while the computer is running it'll no longer recognize it when turned back on. I've tried searching the problem but maybe I'm not using the write words to describe my problem.

Any thoughts?