[SOLVED] Sierra 750 TI Black Screen After Logo (DVI/VGA/HDMI)

[Spinstar]

Hi all. I once had Sierra working fine only on HDMI, DVI never worked but i only need one monitor so that's fine. Since I've switched my hard drive and tried to install again, I can't go through the apple logo.. it gives me a black screen. Tried every solution even AGP Fix. I have Inject Nvida False and I am using the correct WebDrivers.

My board is MSI H81M-P33.
Graphics: ASUS Nvidia GTX 750 TI OC
HyperX 16GB RAM 1600 Mhz
Intel Core I7-4790 3.6 GHZ.

 

[slim.jim]

What SMBIOS are you using? Have you read any of the troubleshooting sticky threads? If you are using HDMI you will need to flash your card with the VBIOS from another manufacturer because of an issue specific to ASUS cards.

 

[Spinstar]

What SMBIOS are you using? Have you read any of the troubleshooting sticky threads? If you are using HDMI you will need to flash your card with the VBIOS from another manufacturer because of an issue specific to ASUS cards.

I am using iMac 14,2. I am right now using DVI, but I get stuck on apple logo

 

[jyc]

that card doesn't work, period.

Some had success flashing other card's BIOS, but I've tried a lot of the BIOS floating around and never got it to work. Use integrated until you get a card~

 

[Spinstar]

that card doesn't work, period.

Some had success flashing other card's BIOS, but I've tried a lot of the BIOS floating around and never got it to work. Use integrated until you get a card~

I got it working by flashing my card BIOS with GM107 rom. Did it yesterday and after Sierra installation all ports (DVI/HDMI/VGA) are working just fine.

 

[jyc]

Congrats! I had no luck with various BIOS. I have since sold the card anyway, oh well.