Skylake Intel HD 530 Graphics Glitch Fix

[Gigamaxx]

I will try your suggestion and, yes, I have another computer with which I can edit the Clover folder.

If you can remove the kexts to patch for the Intel HD 530 fix. It should be in kexts and kernels section if using clover configurator.

I am able to boot without any fixes using the above parameters and get HD 530 1536mb with metal support.

 

[Coquin]

I will try your suggestion and, yes, I have another computer with which I can edit the Clover folder.

Thanks to your suggestion about Intel fix, I am now able to boot from the usb installer and access the EFI folder.

I will now remove the kexts to patch as you are suggesting. It will take a few minutes.

Thanks

 

[Coquin]

Thanks to your suggestion about Intel fix, I am now able to boot from the usb installer and access the EFI folder.

I will now remove the kexts to patch as you are suggesting. It will take a few minutes.

Thanks

I removed all the kexts to patch but I still cannot boot from the system drive. Booting hangs halfway.

 

[Amexxes]

I've had a previous installation which worked very good. I had some issues with video glitches but fixed it with the 0x19120000 and AAPL,GfxYTile.

Now I reinstalled because I have a new SSD installed and also updated to the newest OSX version. Now I still get this glitch issue, especially when I use applications it lags. With mission control and showing all the apps etc. too. Since I use the HD630 I tried this too: “ig-platform-id” changed to 0x59120000, IntelGFX to 0x59128086. I installed the Lilu, intelgraphicsfixup and shiku kexts too but nothing works. Ive had it working previously, the only difference is the newer OSX version. What could it be?

 

[Gigamaxx]

I've had a previous installation which worked very good. I had some issues with video glitches but fixed it with the 0x19120000 and AAPL,GfxYTile.

Now I reinstalled because I have a new SSD installed and also updated to the newest OSX version. Now I still get this glitch issue, especially when I use applications it lags. With mission control and showing all the apps etc. too. Since I use the HD630 I tried this too: “ig-platform-id” changed to 0x59120000, IntelGFX to 0x59128086. I installed the Lilu, intelgraphicsfixup and shiku kexts too but nothing works. Ive had it working previously, the only difference is the newer OSX version. What could it be?

I was able to get my i5 6500 HD 530 working with this only.
Inject Intel=True, fake ID 0x0000000, ig 0x19160000. It lists as HD 630 1536mb. I have lilukext only, no other fixes.

 

[Amexxes]

Still not working sadly

 

[Gigamaxx]

Still not working sadly

Ig 0x59120000?

 

[canyondust]

Still not working sadly

Where is Lilu and Intelgraphicsfixup installed? Also your config.plist has GFX0->IGPU pointing to no target kext (but I'm not sure if that matters). You do have a lot of kext patches too, and I'm not sure they're all necessary...

 

[canyondust]

Still not working sadly

Have you looked at the info in this thread? https://www.tonymacx86.com/threads/how-to-enable-kaby-lake-intel-6xx-graphics-10-12-6.225282/

 

[canyondust]

I am struggling with this in 10.13. see the Clover Configurator and the Plist Edit Pro images below. The question is, why are they different and in Plist Edit Pro this is what it says:
<key>#AddProperties</key>

<array>

<dict>

<key>#Device</key>

<string>XXX</string>

<key>#Key</key>

<string>AAPL,XXX</string>

<key>#Value</key>

<string>0xffff</string

Should "IntelIGFX" be where XXX is and should "AAPL,GfxYTile" be where AAPL,XXX is? IORegistry image is also below.

I don't think you need to inject those properties anymore, just set ig-platform-id=0x59120000 in clover configurator?