- Joined
- Aug 24, 2017
- Messages
- 87
- Motherboard
- GIGABYTE Z270X-UD5 1151
- CPU
- I7-7700K
- Graphics
- Sapphire Nitro RX 580 8 gb
One other thing - I can't figure out how to get clover onto the NVMe - I tried your advice but think I screwed it up. Any tips?
Hey Eightball8! I am just getting my rig buttoned up! I still have to fix my USB 3. Meanwhile I have been using a 4-port USB 3 PCi Card and the USB ports limited to USB2 speeds. I couldn't get High Sierra installed on my OWC PCIe SSD Card.Finally getting around to installing High Sierra and getting my rig running as a daily user.
mrclassicrecord - any new tips or additions to your remarkable earlier guide?
I'm dealing with the Nvidia card issue.
What's the deal with USB 3? Does it look workable? What else?
Thanks in advance.
I used Clover Configurator to mount the EFIs of NVMe and the Installer, then copied the EFI from the Installer and replaced it on NVMe!One other thing - I can't figure out how to get clover onto the NVMe - I tried your advice but think I screwed it up. Any tips?
My internal native graphics ports HDMI/DisplayPort don't work either. I am not sure how to engage/patch them. The Vega Cards work fine. I am not sure if the Z270 Gaming 7 & Z270X-UD5 have the same settings.Thank you for our guide, have been playing with this as well.
i keep getting reboot's and do not reach the installation screen of mac osx.
something with GPUdriversIntel panic.
I use Gigabyte Z270 Gaming 7 internal graphics on a i7 7700k.
any clue?
Hey Eightball8!mrclassicrecord - finally got the Nvidia drivers working - turns out I needed the emuVariableUefi-64.efi to get it to boot.
Now, I'm trying to get audio to work. How did you get audio on your board?
Any tips greatly appreciated!
which smbios are you setting....mouse and key borad are not working with smbios18.3..all works with macpro6.1......my rig is ga-z270 hd3 ..i7 7700k..rx 580...Hey Eightball8!
Glad to hear your up and running!
My onboard Audio isn't patched, nor the onboard HDMI! For my current audio I am using the simple "SABRENT AU-EMAC USB EXTERNAL STEREO SOUND ADAPTER"! However I can also get Audio through the Vega GPU Video Cards HDMI & Display Ports!
I am still going to have to correct my USB 3 configuration after I finalize some more Apps and parts! But if you want native audio start a thread in the hardware generalization and it should get answered there!
Cheers!
iMac (27-inch, Late 2013)which smbios are you setting....mouse and key borad are not working with smbios18.3..all works with macpro6.1......my rig is ga-z270 hd3 ..i7 7700k..rx 580...
the correct smbios is imac18.3iMac (27-inch, Late 2013)