- Joined
- Sep 29, 2017
- Messages
- 3
- Motherboard
- Gigabyte GA-z68m-d2h U1G (Clover)
- CPU
- i7-2600k z68
- Graphics
- HD 3000
I have been trying to get this to work for a week now but despite all of my searching I have not been able to get Sierra to boot with Intel HD 3000 graphics... What's currently happening is that I get to ioconsoleusers: gioscreenlockstate 3, hs 0, bs 0, now 0, sm 0x0 and then my monitor disconnects. I can boot by setting Intel HD Graphics Fake ID to 0x12345678 but obviously that is not fully utilizing the integrated graphics.
I have seen a lot of posts by RehabMan regarding this issue and have followed this guide here with no success: https://www.tonymacx86.com/threads/...-fix-for-os-x-el-capitan-using-clover.176946/
I am running a GA-z68m-d2h motherboard with the uefi bios.
-DVMT Pre-Alloc set to 64m
-DVMT Total Memory Size set to MAX
-all other settings are following the bios guide for sierra
I have tried HDMI and DVI with same results. My current config.plist is attached.
I have seen a lot of posts by RehabMan regarding this issue and have followed this guide here with no success: https://www.tonymacx86.com/threads/...-fix-for-os-x-el-capitan-using-clover.176946/
I am running a GA-z68m-d2h motherboard with the uefi bios.
-DVMT Pre-Alloc set to 64m
-DVMT Total Memory Size set to MAX
-all other settings are following the bios guide for sierra
I have tried HDMI and DVI with same results. My current config.plist is attached.