Contribute
Register

macOS High Sierra is Now Available on the Mac App Store

Status
Not open for further replies.
Successfully updated to macOS 10.13 High Sierra.

- Dual boot High Sierra + Windows 10
- 4k 1080p60 HiDPI working (using CoreDisplayFixup)
- I opted to keep the file system as HFS+ (using --converttoapfs NO)
- Ran audio_cloverALC-130_v0.3.command to restore audio

Had a few issues along the way:
- An error occurred while verifying firmware
- The path /System/Installation/Packages/OSInstall.mpkg appears to be missing or damaged

To solve the above two issues run the latest version of Clover Configurator and re-select your system configuration to update the SMBIOS info (I recommend pasting back your Serial Number if you've already got iMessage etc. working).

For working 4k I compiled the latest versions of Lilu 1.2, Shiki, IntelGraphicsFixup and CoreDisplayFixup. You can download my compiled versions here: Lilu 1.2 + Plugins.zip.
 
Last edited:
Some trouble after upgrading mainboard firmware of Z170X, as I couldn't boot at all anymore.
After figuring out, everything else went "normal": USB and audio needed fixes.
Not yet overclocked – but benchmarks are only about 5 % weaker than they were on my Sierra install with 4,4 GHz.

About This Mac.png
 
10.13.1 Beta(?) update
 

Attachments

  • Captură de ecran din 2017.09.30 la 13.30.47.png
    Captură de ecran din 2017.09.30 la 13.30.47.png
    3.1 MB · Views: 241
Last edited:
In this context, disabling means at a hardware level on the Mobo; Clover should NOT be able to detect the NVIDIA cards, and using nv_disable = 1 does NOT fix the issue. If you cannot disable it in your Mobo's BIOS (I feel like this should be a thing for some newer motherboards, but I know it's not the case for most), then you'll have to physically disconnect the cards.

YES. un-hooked nv card.
Installer went its way till it found something missing.
Reloaded the installer from AppStore.
Installation restarted and ended up satisfacorily.
Started HS with the iGPU, installed nv wev drivers (which didn't complain about the absence of nv card..!).
Reboot and disable IGPU.
Hook nv card and .. voilà.
Succes, finally.
Thks to all of you!
 
Update my system with RX580... WORKING OOB!
Screen Shot 2017-09-30 at 22.23.01.jpg
 

Attachments

  • Screen Shot 2017-09-30 at 22.22.40.png
    Screen Shot 2017-09-30 at 22.22.40.png
    166.8 KB · Views: 144
Fresh install on my sandbox CustoMac (Sandy Bridge) to play with it. Tony's instructions to create the bootable USB with Clover are right on (Thank you, Tony and Team!). Formatted APFS (that is what I want to test) and restored apps and account from TM. The only 3 seconds "pain" :) was dropping MATS table after each reboot until installed Clover on HDD and modified config.plist ACPI section to do it automatically. Can't find anything out of the ordinary compared to Sierra yet (especially speed wise). Will keep playing with it over the next couple of months until proven to be fully stable, especially from app compatibility perspective, before upgrading the rest of the CustoMacs.

NOTE: I didn't have to put the kexts for Clover in the "Other" folder. As done in the past, I created a new folder 10.13 under the kexts folder and Clover works as expected. That allows me to use the same Clover folder for various macOS versions, if needed w/o overwriting the kexts.
 
Last edited:
Status
Not open for further replies.
Back
Top