High Sierra Desktop/Realtek AppleHDA Audio

[toleda]

no audio

See Troubleshooting/Problem Reporting, Post #1. Off topic.

 

[richp21]

Thank you very much!

 

[jiggajaydroid]

See Troubleshooting/Problem Reporting, Post #1. Off topic.

Ok did some reading so what's happening is I pretty much need to boot into single user mode and rebuild cache since after I re run the script is that correct

 

[toleda]

is that correct

No. Read the script output.
See Post #51.

 

[jasperlevi]

Somehow not working. Terminal output on running the command gets stuck at one pont, and the Terminal window title keeps alternating between 'grep - audio_clover_alc-130.sh' and 'sh - audio_cloverALC-130.sh'. Please see the Terminal output below. I have tried several times, also with a fresh AppleHDA.kext. Nothing seems to be working.

File: audio_cloverALC-130.command_v0.3
Release Mode
Password:
EFI partition is mounted
System Integrity Protection status: disabled.

OK to patch
Confirm Realtek ALC1150 (y/n): y
Clover Audio ID Injection (y/n): y
Use Audio ID: 1 (y/n): y

Download ALC1150 files ...
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 23555  100 23555    0     0  11554      0  0:00:02  0:00:02 --:--:-- 11557
Edit config.plist/Devices/Audio/Inject/1
Edit config.plist/SystemParameters/InjectKexts/YES
Download kext patches
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  1855  100  1855    0     0   1318      0  0:00:01  0:00:01 --:--:--  1318

 

[toleda]

running the command gets stuck at one pont,

config.plist is damaged. See No Audio Devices - Realtek ALC AppleHDA/Post #1/II. Problem Reporting. Post to thread linked with requested files attached.

 

[knightjp]

If you wanted to make a new UniBeast USB, would you use the current one or should we wait for another Unibeast update.

 

[toleda]

If you wanted to make a new UniBeast USB

Off topic.

 

[Rnealjr1]

I was able to fix my audio for ACL-1150 by placing AppleALC.kext in /EFI/Clover/Kexts/Other and after doing that I went to my applications folder and right clicked on MultiBeast and clicked on Show Package Contents and found the ALC1150 installer, installed it and rebooted. I can now see all of my outputs and have working audio.

Hope this helps someone.

 

[Úll Mac]

> .... new thread ] ALC280 HELP