Contribute
Register

HP ProBook 450 G4 Working

Status
Not open for further replies.
Hi guys, I finally got my HP Probook 450 G4 :)
Did you do anything in particular to get the camera to work? I'm getting

"No video capture devices were found."

under "Camera" and the info below is from "USB".

USB 3.0 Bus:
Host Controller Driver: AppleUSBXHCISPTLP
PCI Device ID: 0x9d2f
PCI Revision ID: 0x0021
PCI Vendor ID: 0x8086

Camera should be detected with correct USB configuration.
See guide:
https://www.tonymacx86.com/threads/...book-using-clover-uefi-hotpatch-10-11.189416/
 
Hi guys, I finally got my HP Probook 450 G4 :)
Did you do anything in particular to get the camera to work? I'm getting

"No video capture devices were found."

under "Camera" and the info below is from "USB".

USB 3.0 Bus:
Host Controller Driver: AppleUSBXHCISPTLP
PCI Device ID: 0x9d2f
PCI Revision ID: 0x0021
PCI Vendor ID: 0x8086

The camera is working fine on my ProBook 450 G4. I just followed RehabMan's HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11) guide. It shows up on the USB 3.0 bus along with the BlueTooth controller.

-bth
 

Attachments

  • Screen Shot 2017-09-05 at 7.37.14 PM.png
    Screen Shot 2017-09-05 at 7.37.14 PM.png
    147.8 KB · Views: 342
  • Screen Shot 2017-09-05 at 7.37.35 PM.png
    Screen Shot 2017-09-05 at 7.37.35 PM.png
    86.3 KB · Views: 318
Thanks guys I finally got it working.
I also re-enabled virtualization so I could use Docker and it's working fine.
 
Hi, I have bought a new Laptop HP ProBook 450 G4.
Now I get a KP error when boot from USB installer. Can anyone help me especially RehabMan, :)
 

Attachments

  • IMG_0927.JPG
    IMG_0927.JPG
    2.1 MB · Views: 267
Hi rehabman,
when finished first step install, restart and select "Boot macOS Install from ...", I got this error.

You need to re-partition the target drive such that the macOS install target is first.
 
You need to re-partition the target drive such that the macOS install target is first.
Thanks, if I do not re-partition, just install on the first partition. does the error can be still appeared?
 
Thanks, if I do not re-partition, just install on the first partition. does the error can be still appeared?

It is not possible to predict the future.
My guess is you have Windows (or some other OEM partition) at the first partition, such that placing macOS in the first position will be more difficult than you think.
 
It is not possible to predict the future.
My guess is you have Windows (or some other OEM partition) at the first partition, such that placing macOS in the first position will be more difficult than you think.
hi, i have re-partition. now start a new install. may you can bless me. :). I spend much time to transit my data, so I should do it again. :(
 
Status
Not open for further replies.
Back
Top