- Joined
- Jul 21, 2017
- Messages
- 87
- Motherboard
- ASUS Z390 ROG MAXIMUS XI HERO
- CPU
- i7-8700K
- Graphics
- Vega Frontier Edition
- Mac
- Mobile Phone
Hey Eightball8!Awesome, thanks for all the details.
Okay, now I get the relationship between official release and UniBeast/MultiBeast that is designed for the Public release.
What's the time (usually) between the public release and updated UniBeast/MultiBeast?
Parts are starting to pile up on the corner of my desk, and I'm not sure I'm that patient!?!
Thanks for the help.
Here is a guide to were I am at. Hope this is helpful!
Here are the main components to the rig:
* GIGABYTE Z270X-UD5 1151
* Intel I7-7700K
* AMD Radeon Vega Frontier Edition 16GB
* Ballistix Sport LT 64GB (4 x 16GB) 288-Pin SDRAM DDR4 2400 (PC4 19200)
* SAMSUNG 960 EVO M.2 500GB NVMe
* OWC 240GB Mercury Accelsior E2 (Old Stock)(Newer PCIe Cards are faster & less costly)
* 500 GB SSD Scandisk
* TP-LINK TL-WDN4800 Dual Band Wireless N900 PCI Express Adapter, 2.4GHz 450Mbps/5GHz 450Mbps
* SABRENT AU-EMAC USB EXTERNAL STEREO SOUND ADAPTER
* Dual Seiki Pro 28” 4K Monitors
Used High Sierra Beta Guide:
https://www.tonymacx86.com/threads/...h-sierra-public-beta-installation-usb.225520/
Step 1:
Disk Utility: 16GB USB Drive: ERASE, FORMAT Mac OS Extended (Journaled), SCHEME GUID Partion Map & name it USB. If it gives an ERROR perform same exact procedure, it will complete and click DONE!
Step 2:
Paste this code into a Terminal window:
Code:
sudo /Applications/Install\ macOS\ High\ Sierra\ Beta.app/Contents/Resources/createinstallmedia --applicationpath /Applications/Install\ macOS\ High\ Sierra\ Beta.app/ --volume /Volumes/USB/
Open Clover 4184 (or latest edition) package installer:
• Hit Continue, Continue, Change Install Location...
• Choose the USB, now called Install macOS High Sierra Beta
• Hit Customize and install Clover to the same USB Checking:
• Choose the USB, now called Install macOS High Sierra Beta
• Hit Customize and install Clover to the same USB Checking:
☑ Install for UEFI booting only
☑ OsxAptioFix2Drv-64
☑ OsxAptioFix2Drv-64
Click INSTALL! It will Complete the install!
An EFI Partition to the Installer USB will mount in the Finder! If it doesn’t mount, use EFI Mounter App to mount it!
-Navigate to /EFI/CLOVER/ and replace default config.plist with one of the attached config.plist examples.
-Navigate to /EFI/CLOVER/kexts/Other/ and add FakeSMC.kext
-Navigate to EFI/CLOVER/drivers64UEFI/ and add apfs.efi
-(Optional) Navigate to /EFI/CLOVER/kexts/Other/ and add IntelMausiEthernet.kext
-(Optional) Navigate to /EFI/CLOVER/kexts/Other/ and add NullCPUPowerManagement.kext
The Clover Installation USB is now finished.
BIOS SETTINGS
SAVE & EXIT
Load optimized defaults.
BIOS:
Change “Windows 8/10 Features” to “Other OS”
Change “Storage Boot Option Control” to “UEFI”
PERIPHERALS:
Change “SW Guard Extensions (SGX) to “Disabled”
—“Super IO Configuration”
Change “Serial Port” to “Disabled”
—“USB configuration”
Change “XHCI Hand-Off” to “Enabled”
CHIPSET:
Change “VT-d” to “Disabled”
SAVE & EXIT:
Save & Exit Setup “Yes”
INSTALLATION FROM USB HIGH SIERRA BETA:
Power on, Press F-12
-Select, [UEFI PMAP Partition 1]
-@ Clover Select, [Boot OS X Install From Install MacOS High Sierra Beta]
-@ Installer, Open Disk Utility, Click Sidebar Window “Show All Devices”. Select “NVMe” Partition, Format APFS, Click [Partition], Click [Done]. Quit Disk Utility!
-Click [Install MacOS]
-Select “NVMe”
-Auto Re-Boot
-Press F-12
-Select, [UEFI PMAP Partition 1]
-@ Clover Select, [Boot MacOS X Install From NVMe] (this is a temporary container, yellow & black stripe box)
-Auto Re-Boot
-Press F-12
-Select, [UEFI PMAP Partition 1]
-@ Clover Select, [Boot MacOS X Install From NVMe]
-Auto Re-Boot
-Press F-12
-Select, [UEFI PMAP Partition 1]
-@ Clover Select, [Boot MacOS X Install From NVMe]
-Go through Installation & Registration Process!
POST INSTALLATION:
Clover Configurator nor EFI Mounter can’t find Config.plist. This might have to do with APFS as a container and may be the reason why I don’t have Audio, USB 3, and Native HDMI & DisplayPort.
I mounted the EFI from the Installer USB & NVMe Partition with Clover Configurator, Copied the EFI Folder from The Installer USB and placed it in the EFI Partition of NVMe.
Unmounted the USB Installer EFI.
-Navigated to /EFI/CLOVER/kexts/Other/ and added AppleALC.kext, Lilu.kext
I have it running except that the Audio, (USB 3 ports), Native HDMI & DisplayPort and needing kexts to operate. I don’t have Thunderbolt components to test. CHECK Peripherals