[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

[mk2soldier]

You forgot to attach "Problem Reporting" files.

Note: The "not ejected" problem is a very common/typical problem. Don't leave USB storage devices plugged in across sleep/wake cycle.

Here is the IOReg report with a USB 3.0 device (SanDisk Ultra) connected to one of the two USB 3.0 ports
Should I also post the other files even If I've already posted them before?

Thank you for the sleep/wake USB info

 

[RehabMan]

Sorry
but do you recommend 10.11 more?

-- now attach the files

Since, 9x80 is Haswell, the model specific SSDT should have had SSDT-PluginType1.asl.
Added.
Please update from the repo.

And you should remove Virtualbox.

 

[RehabMan]

Here is the IOReg report with a USB 3.0 device (SanDisk Ultra) connected to one of the two USB 3.0 ports
Should I also post the other files even If I've already posted them before?

Thank you for the sleep/wake USB info

This ioreg shows no device plugged in.
Confused.
Did you try increasing the power properties yet?

 

[mk2soldier]

This ioreg shows no device plugged in.
Confused.
Did you try increasing the power properties yet?

Sorry I forgot to ask you, before you wrote about SSDT-XHC.asl, how should I edit/modify it? And more importantly where should I look to find it?

 

[RehabMan]

Sorry I forgot to ask you, before you wrote about SSDT-XHC.asl, how should I edit/modify it? And more importantly where should I look to find it?

Load the Patches project in Xcode, then look at SSDT-XHC.asl.

You will need to do some research on what might be valid values for high current.
One way is to temporarily remove SSDT-XHC.asl from the model specific SSDT, then inject with Clover (config.plist/Devices/USB/Inject=true, config.plist/Devices/USB/HighCurrent=true), then check ioreg to see the values that Clover injected (not to mention testing to see if they solve the problem).

 

[DiegoChajtur]

Since, 9x80 is Haswell, the model specific SSDT should have had SSDT-PluginType1.asl.
Added.
Please update from the repo.

And you should remove Virtualbox.

thanks a lot
i will try and report back

 

[DiegoChajtur]

thanks a lot
i will try and report back

I tried it, but there is still the problem of no screen after wake, the keyboard works, I can login, execute commands, but no image and no backligth ...
screen off - on works, but not wake after sleep (shutdown button -> sleep)

 

[RehabMan]

I tried it, but there is still the problem of no screen after wake, the keyboard works, I can login, execute commands, but no image and no backligth ...
screen off - on works, but not wake after sleep (shutdown button -> sleep)

Read post #1, "Problem Reporting".

 

[DiegoChajtur]

Read post #1, "Problem Reporting".

I already read it but I do not know what to do.

 

[RehabMan]

I already read it but I do not know what to do.

No "Problem Reporting" files attached.
Read post #1, "Problem Reporting" again. Carefully. Attach all requested files/output.

P.S. I don't know why we have to go through this again. All problem reports must have "Problem Reporting" files attached. Any change requires new "Problem Reporting" files. No exceptions.