jaymonkey
Moderator
- Joined
- Aug 27, 2011
- Messages
- 4,079
- Motherboard
- GB Z490 Vision D
- CPU
- i9-10850K OC @ 5.2 GHz
- Graphics
- RX6800-XT+UHD630
- Mac
- Mobile Phone
Ok ...
@jhax01,
So i changed the _RMV method to Return 'One' and left everything else as is ...
This worked ... kind of .. in that i was able to boot OSX with no device plugged into the combo port, once in osx i plugged in USB C device and lo and behold it powered up and was usable .... Yippeee
But after i ejected the device and then replugged in the device it has no power so the port must have powered down after the removal .. i wonder if that down to the conditional if .. else .. will try simplifying the method to look like yours.
@RehabMan,
On Boot up with no device attached there is no XHC RP05 device !!! .... The attached zip archive contains three io reg dumps .
1 - Boot with no device attached
2 - With Device plugged in
3 - After Device Ejected
How do i go about solving the AHCI identity ....
Thanks guys ..
Cheers
Jay
@jhax01,
So i changed the _RMV method to Return 'One' and left everything else as is ...
This worked ... kind of .. in that i was able to boot OSX with no device plugged into the combo port, once in osx i plugged in USB C device and lo and behold it powered up and was usable .... Yippeee
But after i ejected the device and then replugged in the device it has no power so the port must have powered down after the removal .. i wonder if that down to the conditional if .. else .. will try simplifying the method to look like yours.
@RehabMan,
On Boot up with no device attached there is no XHC RP05 device !!! .... The attached zip archive contains three io reg dumps .
1 - Boot with no device attached
2 - With Device plugged in
3 - After Device Ejected
How do i go about solving the AHCI identity ....
Thanks guys ..
Cheers
Jay
Attachments
Last edited: