Contribute
Register

BCM94352Z "Turn WIFI On" Not Working

Status
Not open for further replies.
OK, but when I disconnect the Wifi card it boots perfectly. Could it be that the Wifi card is stopping FakeSMC from loading?
Hello dandanaziz1, I'm about to buy the BCM94352Z for my V3-371 i5-4210u. I'm just wondering that the boot hanging issue was fixed or not?
 
Hello dandanaziz1, I'm about to buy the BCM94352Z for my V3-371 i5-4210u. I'm just wondering that the boot hanging issue was fixed or not?
buy it , it will make your life easier using mackintosh. any problems have been fixed. this hardware is the first primary part that all hackintoshers need.
 
buy it , it will make your life easier using mackintosh. any problems have been fixed. this hardware is the first primary part that all hackintoshers need.
Yeah, BCM94352Z seems to be the only option for my laptop. One more very quick question not related to this topic, my current Ar5bwb222 (ngff type) only support to 802.11n 2.4ghz/5ghz, but BCM94352Z is 802.11ac, is there a chance BCM94352Z works with my laptop?
 
Yeah, BCM94352Z seems to be the only option for my laptop. One more very quick question not related to this topic, my current Ar5bwb222 (ngff type) only support to 802.11n 2.4ghz/5ghz, but BCM94352Z is 802.11ac, is there a chance BCM94352Z works with my laptop?
yes there is. BCM94352Z works as dual band. Buy BCM94352Z NGFF
 
here after you got your wifi BCM94352Z. tape on pin54-56
 

Attachments

  • IMG_1218.JPG
    IMG_1218.JPG
    3.7 MB · Views: 583
here after you got your wifi BCM94352Z. tape on pin54-56
Ok, the two pins to the right at the center, got it, also saved the image to my drive just in case my bad memory:p, once again, thank you :D
 
here after you got your wifi BCM94352Z. tape on pin54-56
May I ask why pin taping is necessary?
The BCM94352Z (DW1560) is working well on my machine without any taping.
 
May I ask why pin taping is necessary?
The BCM94352Z (DW1560) is working well on my machine without any taping.
I am not so sure why but in my case I have Asus UA510UX. I replaced my wifi but I couldn't get it work functionally until I taped the pin.(EVEN I tested DW1560 on Windows 10). when I taped it worked perfectly on Sierra and windows 10.

LOL my problem now is more than that. I got Asus ua510UX which comes with the latest cpu (kabylake) 620 intel graphics. now I cannot get keyboard blacklight and touchpad work. I has been working on this for 2 weeks now.
 
I am not so sure why but in my case I have Asus UA510UX. I replaced my wifi but I couldn't get it work functionally until I taped the pin.(EVEN I tested DW1560 on Windows 10). when I taped it worked perfectly on Sierra and windows 10.

LOL my problem now is more than that. I got Asus ua510UX which comes with the latest cpu (kabylake) 620 intel graphics. now I cannot get keyboard blacklight and touchpad work. I has been working on this for 2 weeks now.
I don't know what you can do about the keyboard backlight, but about your trackpad - There's a good chance it's connected via I2C. Try reading here (please comment there with a copy of IOReg and your DSDT if you can't make it work):
https://www.tonymacx86.com/threads/wip-voodooi2c-i2c-trackpad-limited-support.204227/
 
Status
Not open for further replies.
Back
Top