New Method for Enabling NVIDIA Web Drivers in Clover

[Chloe2003]

...

Guys, there is a new option in the new MultiBeast v9.1.0 update ...

 

[Chloe2003]

I cannot seem to enable the webdrivers, either when I tried with the beta, or now. Had no problems in El Capitan. I tried with no editing (not enabled), I edited the config file, adding the language in the OP, no change. I removed nv_disable=1 (I didn't have nvda_drv=1 because this was a clean install) and I get past the clover screen but the monitor turns off with no signal after getting the initial apple splash screen.
There must be a something I'm missing.

Update MultiBeast to v9.1.0+ and use the MultiBeast Graphics option to use NIVIDIA Web drivers

 

[soussou]

key>InjectKexts</key

key>SystemParameters</key

How to install nvidia driver on USB Drive ?

 

[frnzkfk]

Hi all,

I've been having trouble getting output from my 970 since the update to 10.12.5. Currently on 10.12.6 with the appropriate web drivers, and them initialized properly (modern clover flags, & modern version of it): VNC gets a decent resolution and transparency indicative of hardware acceleration. But my monitor won't show up as connected over any of the ports. Any advice would be greatly appreciated!

(System def is iMac12,2, hardware as listed on the sidebar.)

 

[ezenuni]

I am not sure what you are doing. I never had to bother with InjectNvidia and it should not be used.

I think you are complicating things. Why don't you follow these steps
1. Fresh install Sierra 10.12.4
2. Boot into it using your USB
3. Eject your USB once you have booted into Sierra. This is must to avoid confusion while mounting EFI partition
4. Install latest Nvidia web driver for Pascal.
5. Download my EFI from here and extract to a folder.
6. Use EFI mounter v3 to mount your mac OS hard disk's EFI.
7. Copy my EFI folder to EFI partition which will be visible in finder.
So EFI partition will have EFI folder. EFI folder will have two folders called Clover and Boot.

Reboot and see.

That's it. No messing around with settings especially nvda_drv and injectnvidia should never be used.

YOU ARE THE BEST!!! Whatever you did on here it fixed it! thank you so much!

 

[mukakue]

hi,

my setup is :
- MSI Z97 Gaming 3
- i7-4790k
- MSI GTX970 Gaming 4G
Sierra 10.12.4

After do a Clean Install of Sierra. My GTX970 still wont work perfect. its glitch like a poor vga (sad).

i have done installing nvidia web driver, agdpfix, inject system parameter. its still wont work.

what i have to do?

please help.
hope you have a solution for me.
thanks all

 

[funkyfrank]

This needs to be added to CloverConfigurator...

 

[aol]

This needs to be added to CloverConfigurator...

Clover Configurator has the checkbox "NvidiaWeb" on the "System Parameters" tab that enables the Nvidia Web drivers. Not sure this is what you're asking about.

 

[faxmonkey]

I have tried just about everything to get the NVIDIA Web Drivers to load. I have a Gforce GTX950. I have downloaded and installed the latest driver xxx.25f01. I try to select NVIDIA Web Driver from the menu and restart.
Boots into OSX Default Graphics Driver every time.
BIOS is set to boot PCIe
Internal Graphics Disabled.

This is a fresh install.

 

[P1LGRIM]

I have tried just about everything to get the NVIDIA Web Drivers to load. I have a Gforce GTX950. I have downloaded and installed the latest driver xxx.25f01. I try to select NVIDIA Web Driver from the menu and restart.
Boots into OSX Default Graphics Driver every time.
BIOS is set to boot PCIe
Internal Graphics Disabled.

This is a fresh install.

You need to emulate native support for NVRAM - Problem 6