Contribute
Register

macOS 10.12.6 Update

So ,now it has native support for kaby lake ,right ? SO how can i setup hackintosh on pentium g4560 and gtx 1050 ti ? Any updated guide. I have Gigabyte B250m-DS3H and 1x8 GB crucial 2400 MHz DDR4 RAM
 
My systems keeps crashing after a few minutes. The systems freezes, black screen and reboots.
It does not give me any error messages at the crash and it is totally random, no matter what I try to do.

I updates Clover, updated NVIDIA drivers and macOS to 10.12.6

I also removed the FakeCPUID in Clover cause KabyLake is now native. That all worked perfectly!!

Does anyone have the same experience and fixed that?
Or did I forget something?

UPDATE: As far as I tested the Kernel crashes at some point, cause a text covers the display shortly before the crash happens and there is says something with kernel...
What can cause a kernel crash or can I see in some log file what causes the crash?
 
Last edited:
Hello guys! I've just accidentally updated to 12.6 and unfortunately, it didn't go well. It now stucks on Apple logo with 50% on bar, even on save mode. I didn't update clover it currently on 2.3k rev 3766.
Logs from verbose boot attached, it just doesn't go further.

Any suggestions? I think I need to update clover, but I'm noob in that and I don't know how to do it
IMG_8108.JPG


PS sorry for rotated image, it looks different on my mac
 
GTX 780 Works Natively. No Edits or Mods needed.

Thanks Khalassingh , I don't know about previous Sierra updates as not tried,but in 10.12.6 the only way i could get my gtx-780 to show up correctly and full resolution in overview and seem stable without booting to blank screen, was to just install the latest cuda driver 8.090. For now everything seems to be running ok.
 
I update my X58-UD4P and all fine and all is working well.
 
Thanks Khalassingh , I don't know about previous Sierra updates as not tried,but in 10.12.6 the only way i could get my gtx-780 to show up correctly and full resolution in overview and seem stable without booting to blank screen, was to just install the latest cuda driver 8.090. For now everything seems to be running ok.
you mean by native that it ks working without the webdriver ?
 
you mean by native that it ks working without the webdriver ?

Yes exactly, my other attempts have been installing the latest right Nvidia web drivers for this build 16G29....... though they worked and everything seemed ok, I could not set it to use the web drivers in the Nvidia preferences as it would always revert back to default Mac drivers........

I don't even think the gtx 700 series cards are fully supported by the nv drivers as it states that its for Ti cards that have Maxwell chips, where as the mine has a Kepler chip.

So yeah after doing complete fresh 10.12.6 install going through the procedure of tonymac guide I did nothing else but install the cuda drivers and seems to work fine.......

Oh!! is there a way to test full hardware acceleration , I remember in previous os x's you could do something and see it ripple but I forget now....Ciinebench works so must be working.
 
Back
Top