Contribute
Register

Solving NVIDIA Driver Install & Loading Problems

I have gtx1060 and I installed latest nvdia driver but it doesn't work ! how should I fix it , I also added nvda_drv=1 to arguments and enabled web driver in clover but doesn't work
 
Also stuck with not being able to get the Nvidia drivers to stick. Verified that InjectIntel is false and NvidiaWeb is true in config.plist on EFI. NvidiaGraphicsFixup.kext installed. System type set to MacPro 5,1. Boots reliably but only with OS X drivers which sort of misses the point :)

I notice that when I run System Report and look at PCI, I get the "This computer doesn't contain..." message. Also, when I open the Nvidia prefs, under the ECC tab there are no devices found in any slot. Yes, it's in slot 1 and works correctly under Win10 on the same system.

Ideas?
 
Hi, Thanks a lot for the guide. I was able to fix the black screen issues. However, I just found out that I cannot boot into the recovery partition now. I am wondering if this issue is caused by the Pascal card I have ( 1070).
 
Hacktinosh
GA-Z170XP-SLI |  i7 6700K |  GeForce GTX 1070 FTW DT
superic said:
Hi, Thanks a lot for the guide. I was able to fix the black screen issues. However, I just found out that I cannot boot into the recovery partition now. I am wondering if this issue is caused by the Pascal card I have ( 1070).
Click to expand...

You will need to put nv_disable=1 when booting into the recovery partition.
 
slim.jim said:
You will need to put nv_disable=1 when booting into the recovery partition.
Click to expand...
Thank you for the reply, I just tried that and unfortunately it does not work. I have no clue where to start fixing this issue. I tried searching some posts on this forum but no luck. Could you please suggest some other method please?
 
Hacktinosh
GA-Z170XP-SLI |  i7 6700K |  GeForce GTX 1070 FTW DT
sfenwick said:
Also stuck with not being able to get the Nvidia drivers to stick. Verified that InjectIntel is false and NvidiaWeb is true in config.plist on EFI. NvidiaGraphicsFixup.kext installed. System type set to MacPro 5,1. Boots reliably but only with OS X drivers which sort of misses the point :)

I notice that when I run System Report and look at PCI, I get the "This computer doesn't contain..." message. Also, when I open the Nvidia prefs, under the ECC tab there are no devices found in any slot. Yes, it's in slot 1 and works correctly under Win10 on the same system.

Ideas?
Click to expand...


Same Graphics Card on a Z270 Prime A
Asus board here,

Also getting No Device Found in the ECC tab of the NVIDIA Driver Manager.
Just installed the very latest 378.05.05.25f01 that came out a few hours ago, still the same issue...
Will keep a close eye on replies!

Cheers
 
Hello!, someone has successfully been able to use a GTX 970m with Sierra?
 
Has anyone noticed that the pascal graphics card have issues outputting audio through HDMI? I have a well made SSDT for one of my GTX 1060 and it's just so unreliable.. It only works once every 5 reboot or so.. Any ideas? I'll attach couple of things.

With 900 series I do not have this problem.. No one has seen this anomaly??
 

Attachments

  • SSDT-1.aml
    485 bytes · Views: 151
  • Hack’s iMac.ioreg
    3.2 MB · Views: 133
Hey guys, new to hackintosh but huge Linux guru. That being said I am having issues with problem 6 on a fresh install of 10.12.6 and Nvidia 378.05.05.25f01 for FE 1080 GTX on an ASUS ROG Hero 9 MB.

I have installed clover and added the options specified in problem 6. I also added the optional scripts. I have tried nvda_driver=1 and I have tried removing that option. Nvidiaweb=true is also been added to the config file. No matter what I do after I select nVidia web driver it reverts back to OS X default graphic driver. If this has been mentioned in the forums I do apologize however I have tried everything I can find. Im sure its simple but I seem to be overlooking the solution. Below is a snippet of my clover config. Ive removed the duplicate entry for NvidiaWeb but that has no effect. I've even taking it completely out and still no go. Any help is MUCH appreciated.

<key>SystemParameters</key>
<dict>
<key>#BacklightLevel</key>
<string>0x0501</string>
<key>#CustomUUID</key>
<string>511CE201-1000-4000-9999-010203040506</string>
<key>#NvidiaWeb</key>
<true/>
<key>InjectKexts</key>
<string>Yes</string>
<key>InjectSystemID</key>
<true/>
<key>NvidiaWeb</key>
<true/>
</dict>

Edit: Changed the SMBIOS around a bit but had no effect. Looks like I am having an issue with NVram as I couldnt recall a string I created when I restarted. And yes, I followed problem 6 to the T and rechecked it twice. Determined to figure this out.
 
Last edited:
Hello Friend
I have the problem with GTX 1050 on HP OMEN2017
in Nvidia Driver manager window, in ECC Panel there are No Device found in all 4 slot.
so in About this Mac my graphic card is not GTX 1050 but Intel HD Graphics 630 1536 MB

But When I Check in system report it show Intel HD Graphics 630 and NVIDIA Chip Model
What should I do?
Please help me?
(I did try problem 6 but still not working)

Thankyou
 
Last edited:
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top