Contribute
Register

Cube Modding - X99 / E5-2620 V3 / Quadro K2000D / BD-RW

Status
Not open for further replies.
That's great thanks! And also - do you know where I might find a similar adaptor frame for the optical/SSD drive bay?
 
CD-ROM and SSD mounting bracket.
SSD.jpg
 
The chip / component you removed from the touch sensor, im assuming it is not needed for the on / off touch sensor to work? running into a clearance issue and its right in the way.
 
The chip / component you removed from the touch sensor, im assuming it is not needed for the on / off touch sensor to work? running into a clearance issue and its right in the way.
Remove the chips on the touch component, mainly because the chip is too convex, just conflict with the installation of the motherboard, remove the original touch assembly work as usual.
 
Impressive. One of the best mods I have seen. Congratulations!
 
nice mod. can you tell me which power module you used to fit in the Apple case?
 
thanks, do you have some additional pictures from the wireing from the apple psu? Or some advice which contacts i have to use?
tia Thomas
 
Last edited:
Status
Not open for further replies.
Back
Top