Contribute
Register

Power off reboot my system

Status
Not open for further replies.
Ho RehabMan. I'm trying to install Mac OS sierra on a new hard disk but when I start the install appears like photo. I used terminal command to create the USB installer.
 

Attachments

  • image.jpg
    image.jpg
    3.1 MB · Views: 78
Ho RehabMan. I'm trying to install Mac OS sierra on a new hard disk but when I start the install appears like photo. I used terminal command to create the USB installer.

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Also, your profile must be filled out with complete details as requested in the FAQ, again under "Q. Where do I start?". All seven details requested are equally important.

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"
 
Hi RehabMan. I reinstalled Mac OS Sierra on a new ssd. I have same problem with grafic.
My hd300 isn't inject correctly. If I use NoDefaultProprieties=Yes screen remain white and black and don't start. I attach files.
Can you tell me if there are other error??
 

Attachments

  • Archivio.zip
    1.9 MB · Views: 71
Hi RehabMan. I reinstalled Mac OS Sierra on a new ssd. I have same problem with grafic.
My hd300 isn't inject correctly. If I use NoDefaultProprieties=Yes screen remain white and black and don't start. I attach files.
Can you tell me if there are other error??

What is the issue? (eg. "same problem"??)
 
My screen is like #post 102
 
Yes
If I have:
Inject Intel = Yes
NoDefaultProprieties= Yes
the screen don't load and appears like imagine in the #post 102
 
Yes
If I have:
Inject Intel = Yes
NoDefaultProprieties= Yes
the screen don't load and appears like imagine in the #post 102

Still not clear.
What about Inject/Intel=Yes, NoDefaultProperties=No.
 
Sorry. When I use:
Inject/Intel=Yes
NoDefaultProprieties=Yes
I have this:
 

Attachments

  • Schermata 2017-06-16 alle 15.57.22.png
    Schermata 2017-06-16 alle 15.57.22.png
    357.5 KB · Views: 72
Status
Not open for further replies.
Back
Top