Contribute
Register

ASRock Deskmini 110 issues

Status
Not open for further replies.
Ok so change of plans I went with the i3-7100 since I really didn't need the power for this machine its going to be used as an HTPC mainly so now I have 10.12.5 installed but I can't get graphics acceleration to work I have read the guides and changed a couple of things in clover but with no luck ... anyone can share some insight on this ??? or a EFI folder ...

Thanks
 
Can you describe the steps for acceleration? ? I am not even sure if my acceleration works.

Is your HDMI video port working fine as well as the Display Port? If both are working can you kindly share your config.plist and the kext or patch files you used for that?

You talking about the ASRock Deskmini 110 here correct?

Ok i made a new attempt and now i am running 10.12.5 with graphics acceleration ..... now onto HDMI audio
 
Can you describe the steps for acceleration? ? I am not even sure if my acceleration works.

Is your HDMI video port working fine as well as the Display Port? If both are working can you kindly share your config.plist and the kext or patch files you used for that?

You talking about the ASRock Deskmini 110 here correct?

Yeah the deskmini I was doing it using another method that I remembered worked for me sometime ago with other builds that included doing everything in clover.... So I started from scratch used unibeast and multibeast and now I have everything up and running on 12.5.....

To follow up your question yeah I can use hdmi and dp I can try them both at the same time because I am using 1 monitor for this computer... Also to test DP I used a DP to hdmi since I am using a TV for the display.... I don't have any patches to Kexts as of now and everything is under L/E if you want I can share that folder
 
Thanks Shremi and yes if you could please share your L/E folder it will be awesome. Thanks again.

I may have to start form scratch again. Did you follow any guide or any particular documented method?

Yeah the deskmini I was doing it using another method that I remembered worked for me sometime ago with other builds that included doing everything in clover.... So I started from scratch used unibeast and multibeast and now I have everything up and running on 12.5.....

To follow up your question yeah I can use hdmi and dp I can try them both at the same time because I am using 1 monitor for this computer... Also to test DP I used a DP to hdmi since I am using a TV for the display.... I don't have any patches to Kexts as of now and everything is under L/E if you want I can share that folder
 
Thanks Shremi and yes if you could please share your L/E folder it will be awesome. Thanks again.

I may have to start form scratch again. Did you follow any guide or any particular documented method?

Here you go ... ia m still messing around with the configurations but here is the most recent using clover only no kexts on L/E
btw you should notice if graphics acceleration is not working properly right off the bat the screen acts really weird and also I am using a Kaby Lake Cpu so bare in mind that the config.plist and edits are for that cpu
 

Attachments

  • EFI.zip
    16.5 MB · Views: 165
Well I hate this thing .... I was trying to get audio to work first before moving onto hdmi audio while I was thinking it was working properly I plugged in some headphones and it sounds like garbage I tested Windows and everything works fine .... And I used all of the methods on this thread to enable it .... Is this because I am on 12.5 or by I am using a Kably lake processor but this is getting reallystarting to frustrate me ....

If anyone is on 12.5 and with a Kably lake cup can you provide me some guidance on this
 
I am on Kaby Lake as well and works fine. Attach you current config.plist and I will take a look at it.

I followed this guide for the sound and it worked perfect https://www.tonymacx86.com/threads/asrock-deskmini-110-issues.200939/page-14#post-1486217



Well I hate this thing .... I was trying to get audio to work first before moving onto hdmi audio while I was thinking it was working properly I plugged in some headphones and it sounds like garbage I tested Windows and everything works fine .... And I used all of the methods on this thread to enable it .... Is this because I am on 12.5 or by I am using a Kably lake processor but this is getting reallystarting to frustrate me ....

If anyone is on 12.5 and with a Kably lake cup can you provide me some guidance on this
 
I am on Kaby Lake as well and works fine. Attach you current config.plist and I will take a look at it.

I followed this guide for the sound and it worked perfect https://www.tonymacx86.com/threads/asrock-deskmini-110-issues.200939/page-14#post-1486217

Yeah I also tried that.... I mean the audio is enabled for all I know.... The thing is that everything sounds broken music the os even YouTube videos....I don't know if reinstalling would be required but it is weird I thought it was a hardware problem I just finished installing windows and works perfectly fine so hardware failure it's not a possibility anymore
 
Status
Not open for further replies.
Back
Top