- Joined
- Dec 30, 2015
- Messages
- 144
- Motherboard
- Intel Lynx Point-LP
- CPU
- intel i5 4200U
- Graphics
- intel HD4400 Haswell Mobile 1366x768
- Mac
- Mobile Phone
Acer Travelmate TMP255-M 15"
Intel Core i5 4200U 1.6-2.3ghz Turbo boost max 2.6ghz
Intel HD4400 Graphics
8GB Ram
120GB SSD kingston UV400 /500 HDD Caddy
I replace only HDD to SSD for better performance..
What Works:
What Doesn't Work:
Main steps:
1. BIOS setting
>double click clover r3974
>select change install location > select your USB
>check the box for install UEFI booting only
>check the box for install Clvoer in the ESP
>check the box for themes
>click drop down driver64UEFI
>check the box OSxAptioDrv-64
>click install
or follow this guide https://www.tonymacx86.com/threads/...ierra-on-any-supported-intel-based-pc.200564/
Download FakePCIID.kext, FakeSMC.kext, IntelHDGraphics.kext, BCM57XX.kext[ethernet] https://bitbucket.org/RehabMan/os-x-fake-pci-id/downloads
Download for voodoPS2Controller.kext https://github.com/RehabMan/OS-X-Voodoo-PS2-Controller
Put all these kext on EFI/Clover/Kext/Others
For Config.plist use [intel hd4400] you can download it here https://github.com/RehabMan/OS-X-Clover-Laptop-Config
put conifg.plist on EFI/Clover (remove the default inside the clover after installation)
Note: after you copy & paste all the files you need inside the EFI folder directories. COPY the "Others" folder & "config.plist" on your extra usb drive. we will install it later on SSD/HDD after installation of MacOS Sierra.
3. Installation
4. Installation for SSD/HDD
download CLOVER boot loader r3974 latest https://sourceforge.net/projects/cloverefiboot/
>double click clover r3974
>select change install location > select your USB
>check the box for install UEFI booting only
>check the box for install Clover in the ESP
>check the box for themes
>click drop down driver64UEFI
>check the box OSxAptioDrv-64
>check the box install on the target volume RC Script
>click install
remove bootable USB drive.
insert your extra USB copy & paste the "Others" folder & "config.plist" file and put it on ssd/hdd - EFI/Clover/config.plist, download any kext utility app install all the drivers inside the Others folder that you copy earlier.
also do not forget to download HFS.efi https://github.com/JrCs/CloverGrowerPro/raw/master/Files/HFSPlus/X64/HFSPlus.efi
put on ssd/hdd - EFI/Clover/driver64EUFI
remove your usb and restart your laptop..
if clover bootloader appears.. press "f4" then press enter on your MacOS Sierra Drive.
DSDT Patch
>On your desktop mount your EFI using EFImounterV3 or clover configurator.app
>go to EFI/Clover/ACPI/Origin copy and paste "dsdt,ssdt-0,ssdt-1,ssdt-2 & ssdt-6" on documents folder.
follow this guide for extracting and patching DSDT https://www.tonymacx86.com/threads/guide-patching-laptop-dsdt-ssdts.152573/
>just use refs.txt for no error from DSDT & SSDT's and you only need is to patch the common patch on DSDT.
on DSDT
"B0D3 > HDAU change lay out Id 12 to 28
"GFX0 > IGPU"
"ADP1"
"Fix _WAK Arg0 v2"
"HPET Fix"
"SMBUS Fix"
"IRQ Fix"
"Fix IMEI"
"Fix MCHC"
"Fix ShutdownV2"
"RTC Fix"
"Fix Mutex with non-zero SyncLevel"
"audio lay-out 12 [hdef]" change 12 to "28" - remove the HDA-GFX code before patch apply.
"Fix USB-8series" (sleep fix)
"apply usb 0x6d"
Patch SSDt-0,SSDt-2
"apply patch gfx0 > IGPU"
Patch SSDt-1
"apply patch [Syntax] PSS"
"apply patch gfx0 > IGPU"
Patch SSDT-6
"apply patch gfx0 > IGPU"
"apply patch b0d3 > HDAU - change lay-out ID 12 to 28
"apply patch haswell 0x0a260006"
after fixing & patching your DSDT,, put your DSDT on "EFI/Clover/ACPI/Patch"
SSDT PATCH
For "SSDT.aml" CPU power management refer to this thread https://www.tonymacx86.com/threads/guide-native-power-management-for-laptops.175801/
Open config.plist using clover configurator.app and check dropOEM under config.plist/ACPI/SSDT , also sort ssdt remove ssdt-3,ssdt-4 & ssdt-5, ssdt-7 and so on. then save.
>For Native appleHDA just use vietnam tools select >kext>audio>laptop>realtek>alc282 v2
>also download and install codecCommander by RehabMan.
>For WIFI AR956x
All Credits goes to RehabMan..
Done.. if you have any question..Feel free to ask..
Intel Core i5 4200U 1.6-2.3ghz Turbo boost max 2.6ghz
Intel HD4400 Graphics
8GB Ram
120GB SSD kingston UV400 /500 HDD Caddy
I replace only HDD to SSD for better performance..
What Works:
- Battery Indicator
- Bluetooth
- Display Brightness Slider
- Graphics (Intel HD4400 Acceleration)
- Keyboard
- Sound ALC282
- SSD120GB "Primary" / 500HDD "caddy [dvd-rw rom]"
- Power Management
- Touchpad
- HDMI
- Webcam
- Wifi AR956x
- SD Card Reader
- Sleep/Wake/Restart/Shutdown
What Doesn't Work:
- Nothing..
Main steps:
- Bios setting
- Create bootable USB
- Post Installation
- Installation for SSD/HDD:
- Clover Installation
- Installing kexts drivers
- DSDT patch (common patches)
- SSDT-6 patch (for IGPU/HDAU)
- Native AppleHDA patch
- Pathc Wifi AR956x
- Define your own SMBIOS, i preferred (MacBookPro 11.1)
1. BIOS setting
- Disable secure boot
- Disable enable wake on Lan
- insert your 8GB or 16GB USB
MAC OS Sierra 10.12.2
Instructions:
>Insert the USB drive
>Open /Applications/Utilities/Disk Utility
>Highlight the USB drive in left column
>Click on the Partition tab
>Click Current and choose 1 Partition
>Click Options
>Choose GUID Partition Table
>Name: type USB
>Format: choose Mac OS Extended Journaled
>Click Apply then Partition
>Open /Applications/Utilities/Terminal
>copy and paste this command and press enter
Code:sudo /Applications/Install\ macOS\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ macOS\ Sierra.app --nointeraction
>double click clover r3974
>select change install location > select your USB
>check the box for install UEFI booting only
>check the box for install Clvoer in the ESP
>check the box for themes
>click drop down driver64UEFI
>check the box OSxAptioDrv-64
>click install
or follow this guide https://www.tonymacx86.com/threads/...ierra-on-any-supported-intel-based-pc.200564/
Download FakePCIID.kext, FakeSMC.kext, IntelHDGraphics.kext, BCM57XX.kext[ethernet] https://bitbucket.org/RehabMan/os-x-fake-pci-id/downloads
Download for voodoPS2Controller.kext https://github.com/RehabMan/OS-X-Voodoo-PS2-Controller
Put all these kext on EFI/Clover/Kext/Others
For Config.plist use [intel hd4400] you can download it here https://github.com/RehabMan/OS-X-Clover-Laptop-Config
put conifg.plist on EFI/Clover (remove the default inside the clover after installation)
Note: after you copy & paste all the files you need inside the EFI folder directories. COPY the "Others" folder & "config.plist" on your extra usb drive. we will install it later on SSD/HDD after installation of MacOS Sierra.
3. Installation
- restart your LAPTOP.
- Press F12 select your bootable USB drive.
- open disk utility and format your drive..
- Select MacOS Sierra..proceed to installation.. 15-20mins maybe..
- set up wizard.. set up your account do not connect to internet..
- do not remove bootable usb drive.
4. Installation for SSD/HDD
download CLOVER boot loader r3974 latest https://sourceforge.net/projects/cloverefiboot/
>double click clover r3974
>select change install location > select your USB
>check the box for install UEFI booting only
>check the box for install Clover in the ESP
>check the box for themes
>click drop down driver64UEFI
>check the box OSxAptioDrv-64
>check the box install on the target volume RC Script
>click install
remove bootable USB drive.
insert your extra USB copy & paste the "Others" folder & "config.plist" file and put it on ssd/hdd - EFI/Clover/config.plist, download any kext utility app install all the drivers inside the Others folder that you copy earlier.
also do not forget to download HFS.efi https://github.com/JrCs/CloverGrowerPro/raw/master/Files/HFSPlus/X64/HFSPlus.efi
put on ssd/hdd - EFI/Clover/driver64EUFI
remove your usb and restart your laptop..
if clover bootloader appears.. press "f4" then press enter on your MacOS Sierra Drive.
DSDT Patch
>On your desktop mount your EFI using EFImounterV3 or clover configurator.app
>go to EFI/Clover/ACPI/Origin copy and paste "dsdt,ssdt-0,ssdt-1,ssdt-2 & ssdt-6" on documents folder.
follow this guide for extracting and patching DSDT https://www.tonymacx86.com/threads/guide-patching-laptop-dsdt-ssdts.152573/
>just use refs.txt for no error from DSDT & SSDT's and you only need is to patch the common patch on DSDT.
on DSDT
"B0D3 > HDAU change lay out Id 12 to 28
"GFX0 > IGPU"
"ADP1"
"Fix _WAK Arg0 v2"
"HPET Fix"
"SMBUS Fix"
"IRQ Fix"
"Fix IMEI"
"Fix MCHC"
"Fix ShutdownV2"
"RTC Fix"
"Fix Mutex with non-zero SyncLevel"
"audio lay-out 12 [hdef]" change 12 to "28" - remove the HDA-GFX code before patch apply.
"Fix USB-8series" (sleep fix)
"apply usb 0x6d"
Patch SSDt-0,SSDt-2
"apply patch gfx0 > IGPU"
Patch SSDt-1
"apply patch [Syntax] PSS"
"apply patch gfx0 > IGPU"
Patch SSDT-6
"apply patch gfx0 > IGPU"
"apply patch b0d3 > HDAU - change lay-out ID 12 to 28
"apply patch haswell 0x0a260006"
after fixing & patching your DSDT,, put your DSDT on "EFI/Clover/ACPI/Patch"
SSDT PATCH
For "SSDT.aml" CPU power management refer to this thread https://www.tonymacx86.com/threads/guide-native-power-management-for-laptops.175801/
Open config.plist using clover configurator.app and check dropOEM under config.plist/ACPI/SSDT , also sort ssdt remove ssdt-3,ssdt-4 & ssdt-5, ssdt-7 and so on. then save.
>For Native appleHDA just use vietnam tools select >kext>audio>laptop>realtek>alc282 v2
>also download and install codecCommander by RehabMan.
>For WIFI AR956x
All Credits goes to RehabMan..
Done.. if you have any question..Feel free to ask..
Last edited: