This isn't a help threadI have tried twice now to boot from the USB and both times upon start up the status bar gets hung up about 9/10ths of the way to finish line.
I am upgrading from El Capitan to Sierra so I can install my GTX1070 which I bought too early and have waited till now for the drivers to be available.
This is my first Hackintosh and I also have a mac mini I am using as my main desktop and this Intel one is being used exclusively for running large CAD files and handling renderings, no audio or anything except internet. So I am out of my depth here to be sure but under El Capitan all was pretty stable.
I've installed the card and downloaded the driver but stuck on the instructions to load Sierra which I followed as close as possible except there were a few items that didn't show up in the process so I couldn't do the following:
1) Formatting for the USB did not offer up the Scheme option to select
2) The Recommended BIOS options were also not available or I don't know how to access them
I used a know (marked) USB 2.0 port on the second try of the install but it was in a port I wasn't sure of on the first try.
The screen that gets locked up also has the little beach ball in the upper left corner; frozen the first time around and spinning on the second try. Other things that cropped up after installing the new card is that my second monitor is not being recognized.
Any advice would be appreciated.
Gigabyte Z170X-UD3
i7 6700 4.0Ghz
SSD 850 1Tb
GTX 1070
16mb RAM
This is a Desktop Support forum - For help with your Laptop you should post in the relevant Laptop Compatibility forum.i have hp laptop with 5th gen i3 processor with 8 GB Ram ,1 TB HD and 2 GB graphics card ,Can i install mac os x sierra in my laptop
I easy fixed it, just moved the bluetooth to the USB port 2.0 "black", do not put it in USB port 3.0 "blue". DONEbluetooth support Clover/BIOS. My bluetooth keyboard/mouse not working in BIOS and Clover Any help Please ? was working before i change my config.plist.
This isn't a help thread. I recommend you create a new thread in the Sierra Desktop Support forum section.Hello everyone! I am a novice in this world and I apologize for my inability. I followed the procedure, but at the time of installation everything crashes on the apple screen with the loading bar below. Seeing my hardware components, what was wrong with me? Thanks in advance!
read post 857When I select this the screen turns black and nothing happens, help?