Contribute
Register

*(Driver Help Please)* Asus ROG maximus VIII Impact, i5 6500 3.2ghz, i5 6600k 3.5Ghz

Status
Not open for further replies.
Joined
Apr 15, 2017
Messages
14
Motherboard
Asus ROG VIII Impact
CPU
Intel Core i5 6600K
Graphics
Radeon HD 5450
Mac
  1. iMac
  2. MacBook Pro
Mobile Phone
  1. iOS
Hiya techie folks,

I wonder if anyone could please help with some driver issues I currently have :crazy:.

I am looking for Sound, LAN, Wireless and possible Video drivers for Mac OS Sierra.

My specs are below:

Asus ROG Maximus VIII Impact motherboard
Intel core i5 6600k 3.5Ghz CPU
Seagate 2TB Hard Drive
Corsair Vengeance 16Gb kit
Using onboard intel 530 onboard Graphics

I have tried the drivers below but with no success :thumbdown:

Realtek ALC1150 for sound
IntelMausiEthernet for Lan
I haven't tried any video drivers as I am not sure if they are right however it flickers just before I login :!:

I am also using system definition iMac 14,2 is this right?

If anyone know's the correct drivers for my spec's or anything I need to include from MultiBeast for mac OS Sierra I would greatly appreciate it very much.

Thanks so much Lucy :)
 
HI Welshspy,
if memory serves me correctly the Asus v series motherboards sound and wifi are not supported.
I use a usb head set which has 7.1 audio jack adapters.(usb -- audio jack's)
you can get a logitech one cheep or a PCIE audio card which can be found in Tony's supported hardware or golden builds section.
the lan drivers should be the standard ones when installing. if you need help I can upload my kext.

if possible please upload boot.log playlist in clover configurator.

this link might help

https://www.tonymacx86.com/threads/...s-viii-gene-i5-6600k-gigabyte-gtx-950.181272/
 
Last edited:
HI Welshspy,
if memory serves me correctly the Asus v series motherboards sound and wifi are not supported.
I use a usb head set which has 7.1 audio jack adapters.(usb -- audio jack's)
you can get a logitech one cheep or a PCIE audio card which can be found in Tony's supported hardware or golden builds section.
the lan drivers should be the standard ones when installing. if you need help I can upload my kext.

if possible please upload boot.log playlist in clover configurator.

this link might help

https://www.tonymacx86.com/threads/...s-viii-gene-i5-6600k-gigabyte-gtx-950.181272/


Thanks for replying dbNine :),

There are a few people on here with the same board that have manage to get everything working apart from the wireless which is fine for me. But no-one has said how or what they used. I did reply to there feed but nothing back so maybe they don't use this site anymore :(.

I have been following Stork's guide but does not seem to work on my board :banghead:.
I am new to all this Hackintosh so learning every step of the way.

Thanks again anyhow.
Lucy xx
 
ok, watch this on youtube and past your boot.log How to use Clover Configurator (Hackintosh Tutorial)
make sure you are using the correct config.plist that you boot from or // your clover is booting from
also please use multibeast and take a image of your build compiler.

:) I know it is frustrating but with the help of the moderators and users it is a breaze

what OS X version you running OS X El Capitan?
 
Last edited:
The correct configuration file is located on your EFI partition in /EFI/Clover/config.plist
 
ok, watch this on youtube and past your boot.log How to use Clover Configurator (Hackintosh Tutorial)
make sure you are using the correct config.plist that you boot from or // your clover is booting from
also please use multibeast and take a image of your build compiler.

:) I know it is frustrating but with the help of the moderators and users it is a breaze

what OS X version you running OS X El Capitan?
ok, watch this on youtube and past your boot.log How to use Clover Configurator (Hackintosh Tutorial)
make sure you are using the correct config.plist that you boot from or // your clover is booting from
also please use multibeast and take a image of your build compiler.

:) I know it is frustrating but with the help of the moderators and users it is a breaze

what OS X version you running OS X El Capitan?

Thanks so much for your help dbNine,

Again sorry for the late reply I have been at drama class and on a shoot this week.

No I am using OS Sierra and my spec's are below:

Asus ROG Maximus VIII Impact motherboard
Intel core i5 6600k 3.5Ghz CPU
Seagate 2TB Hard Drive
Corsair Vengeance 16Gb kit
Using onboard intel 530 onboard Graphics

Ok a small update before I send you the boot log and config file.
The LAN seems to be working now and the bluetooth is working :)

The sound & wireless is still not working and not sure about the display as it flickers on logon :crazy:

Also it is very slow booting is this because it is looking for hardware??

Ok my boot.log file not sure how to add this so it stays in a nice box:

Code:
0:100  0:100  MemLog inited, TSC freq: 3504480800
0:100  0:000  MemLog was calibrated without ACPI PM Timer: ACPI I/O space is not enabled.
0:100  0:000
0:100  0:000  Now is 11.5.2017,  0:29:3 (GMT)
0:100  0:000  Starting Clover revision: 3766 on American Megatrends EFI
0:100  0:000  Build with: [Args: -x64 -D DISABLE_LTO -t XCODE5 | -D DISABLE_LTO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 9 | OS: 10.11.6 | XCODE: 7.3.1]
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,DB7B9526-4A3A-4990-BE47-FCB14EDE8881,0x28,0x64000) @86BAF958
0:100  0:000  SelfDirPath = \EFI\BOOT
0:102  0:001  === [ Get Smbios ] ========================================
0:102  0:000  Total Memory Slots Count = 4
0:102  0:000  Type 17 Index = 0
0:102  0:000  SmbiosTable.Type17->Speed = 2667MHz
0:102  0:000  SmbiosTable.Type17->Size = 8192MB
0:102  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM1
0:102  0:000  SmbiosTable.Type17->Vendor = Corsair
0:102  0:000  SmbiosTable.Type17->SerialNumber = 00000000
0:102  0:000  SmbiosTable.Type17->PartNumber = CMK16GX4M2A2666C16
0:102  0:000  Type 17 Index = 1
0:102  0:000  Ignoring insane frequency value 0MHz
0:102  0:000  SmbiosTable.Type17->Speed = 0MHz
0:102  0:000  SmbiosTable.Type17->Size = 0MB
0:102  0:000  SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM2
0:102  0:000  SmbiosTable.Type17->Vendor = <null string>
0:102  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:102  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:102  0:000  Type 17 Index = 2
0:102  0:000  SmbiosTable.Type17->Speed = 2667MHz
0:102  0:000  SmbiosTable.Type17->Size = 8192MB
0:102  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM1
0:102  0:000  SmbiosTable.Type17->Vendor = Corsair
0:102  0:000  SmbiosTable.Type17->SerialNumber = 00000000
0:102  0:000  SmbiosTable.Type17->PartNumber = CMK16GX4M2A2666C16
0:102  0:000  Type 17 Index = 3
0:102  0:000  Ignoring insane frequency value 0MHz
0:102  0:000  SmbiosTable.Type17->Speed = 0MHz
0:102  0:000  SmbiosTable.Type17->Size = 0MB
0:102  0:000  SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM2
0:102  0:000  SmbiosTable.Type17->Vendor = <null string>
0:102  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:102  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:102  0:000  Boot status=0
0:102  0:000  Running on: 'System Product Name' with board 'MAXIMUS VIII IMPACT'
0:102  0:000  === [ GetCPUProperties ] ==================================
0:102  0:000  CPU Vendor = 756E6547 Model=506E3
0:102  0:000  got cores from CPUID_1 = 0
0:102  0:000  The CPU supported turbo
0:102  0:000  BrandString = Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz
0:102  0:000   TSC/CCC Information Leaf:
0:102  0:000    numerator     : 292
0:102  0:000    denominator   : 2
0:102  0:000   Calibrated ARTFrequency: 24003293
0:102  0:000  MSR 0xE2 before patch 00000000
0:102  0:000  MSR 0xE4              00000000
0:102  0:000  MSR 0xCE              00080838_F1012300
0:102  0:000  non-usable FLEX_RATIO = F0000
0:102  0:000  corrected FLEX_RATIO = E0000
0:102  0:000  MSR 0x1B0             00000000
0:102  0:000  FSBFrequency=100MHz DMIvalue=100000kHz
0:102  0:000  Corrected FSBFrequency=100MHz
0:102  0:000  Vendor/Model/Stepping: 0x756E6547/0x5E/0x3
0:102  0:000  Family/ExtFamily: 0x6/0x0
0:102  0:000  MaxDiv/MinDiv: 35.0/8
0:102  0:000  Turbo: 39/39/39/39
0:102  0:000  Features: 0xBFEBFBFF
0:102  0:000  Threads: 4
0:102  0:000  Cores: 4
0:102  0:000  FSB: 100 MHz
0:102  0:000  CPU: 3500 MHz
0:102  0:000  TSC: 3500 MHz
0:102  0:000  PIS: 400 MHz
0:102  0:000  === [ GetDevices ] ========================================
0:102  0:000  PCI (00|00:00.00) : 8086 191F class=060000
0:102  0:000  PCI (00|00:02.00) : 8086 1912 class=030000
0:102  0:000   - GFX: Model=Intel HD Graphics 530 (Intel)
0:102  0:000  PCI (00|00:14.00) : 8086 A12F class=0C0330
0:102  0:000  PCI (00|00:16.00) : 8086 A13A class=078000
0:102  0:000  PCI (00|00:17.00) : 8086 A102 class=010601
0:102  0:000  PCI (00|00:1B.00) : 8086 A167 class=060400
0:102  0:000  PCI (00|00:1C.00) : 8086 A110 class=060400
0:102  0:000  PCI (00|00:1C.02) : 8086 A112 class=060400
0:102  0:000  PCI (00|03:00.00) : 168C 003E class=028000
0:102  0:000   - WIFI: Vendor=Atheros
0:102  0:000  PCI (00|00:1C.04) : 8086 A114 class=060400
0:102  0:000  PCI (00|04:00.00) : 8086 1578 class=060400
0:102  0:000  PCI (00|05:00.00) : 8086 1578 class=060400
0:102  0:000  PCI (00|05:01.00) : 8086 1578 class=060400
0:102  0:000  PCI (00|05:02.00) : 8086 1578 class=060400
0:102  0:000  PCI (00|08:00.00) : 8086 15B6 class=0C0330
0:102  0:000  PCI (00|05:04.00) : 8086 1578 class=060400
0:102  0:000  PCI (00|00:1D.00) : 8086 A118 class=060400
0:102  0:000  PCI (00|00:1F.00) : 8086 A145 class=060100
0:102  0:000  PCI (00|00:1F.02) : 8086 A121 class=058000
0:102  0:000  PCI (00|00:1F.03) : 8086 A170 class=040300
0:102  0:000  PCI (00|00:1F.04) : 8086 A123 class=0C0500
0:102  0:000  PCI (00|00:1F.06) : 8086 15B8 class=020000
0:102  0:000   - LAN: 0 Vendor=Intel
0:102  0:000  === [ GetDefaultSettings ] ================================
0:102  0:000  Clover load options size = 0 bytes
0:114  0:012  , Status=Success
0:114  0:000  EFI\CLOVER\config.plist loaded: Success
0:114  0:000  === [ GetListOfThemes ] ===================================
0:115  0:000  - [00]: embedded
0:137  0:021  - [00]: random
0:140  0:003  - [00]: tonymacx86
0:145  0:004  === [ GetEarlyUserSettings ] ==============================
0:145  0:000  timeout set to 3
0:145  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:145  0:000  KextsToPatch: 5 requested
0:145  0:000   - [00]: AppleAHCIPort (External icons patch) :: BinPatch :: data len: 8
0:145  0:000   - [01]: AppleUSBXHCIPCI (Increase 15 port limit to 26 in AppleUSBXHCIPCI) :: BinPatch :: data len: 7
0:145  0:000   - [02]: AppleHDA (10.12-AppleHDA/Realtek ALC...) :: BinPatch :: data len: 4
0:145  0:000   - [03]: AppleHDA (10.9-10.12-AppleHDA/Realtek ALC1150) :: BinPatch :: data len: 4
0:145  0:000   - [04]: AppleHDA (AppleHDA/Resources/xml>zml) :: BinPatch :: data len: 6
0:145  0:000  Default theme: tonymacx86
0:145  0:000  Hiding entries with string Windows
0:145  0:000  Hiding entries with string \EFI\BOOT\BOOTX64.EFI
0:145  0:000  === [ LoadDrivers ] =======================================
0:149  0:004  Loading FSInject-64.efi  status=Success
0:155  0:005  Loading OsxAptioFix2Drv-64.efi  status=Success
0:159  0:003  Loading OsxFatBinaryDrv-64.efi  status=Success
0:162  0:003  Loading VBoxHfs-64.efi  status=Success
0:166  0:003   - driver needs connecting
0:167  0:000  1 drivers needs connecting ...
0:167  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
0:167  0:000  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:379  0:212  Dump SMC keys from NVRAM:
0:402  0:022     fakesmc-key-#KEY-ui32:00 00 00 00
0:403  0:000     fakesmc-key-$Adr-ui32:00 00 03 00
0:404  0:000     fakesmc-key-$Num-ui8:01
0:404  0:000     fakesmc-key-RMde-char:41
0:407  0:002     fakesmc-key-RPlt-ch8*:6A 31 37 00 00 00 00 00
0:408  0:000     fakesmc-key-RBr -ch8*:6A 31 36 6A 31 37 00 00
0:408  0:000     fakesmc-key-EPCI-ui32:07 A0 07 00
0:409  0:000     fakesmc-key-REV -ch8*:02 15 0F 00 00 07
0:410  0:000     fakesmc-key-BEMB-flag:00
0:411  0:000     fakesmc-key-BATP-flag:00
0:411  0:000     fakesmc-key-BNum-ui8:00
0:412  0:000     fakesmc-key-MSTc-ui8:00
0:413  0:000     fakesmc-key-MSAc-ui16:00 00
0:414  0:000     fakesmc-key-MSLD-ui8:00
0:414  0:000     fakesmc-key-MSWr-ui8:00
0:415  0:000     fakesmc-key-MSFW-ui8:01 00
0:416  0:000     fakesmc-key-MSPS-ui16:00 03
0:430  0:014  === [ InitScreen ] ========================================
0:430  0:000  SetScreenResolution: 1920x1080 - not found!
0:430  0:000  SetMaxResolution: found best mode 4: 1680x1050
0:629  0:199  Video mode change to mode #4: Success
0:629  0:000   - set
0:629  0:000  Console modes reported: 4, available modes:
0:629  0:000   - [01]: 80x25 (current mode)
0:629  0:000   - [02]: 80x50
0:629  0:000   - [03]: 100x31
0:629  0:000   - [04]: 210x55
0:629  0:000  SetScreenResolution: 1680x1050 - already set
0:629  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,DB7B9526-4A3A-4990-BE47-FCB14EDE8881,0x28,0x64000)
0:723  0:093  === [ GetMacAddress ] =====================================
0:723  0:000  === [ ScanSPD ] ===========================================
0:723  0:000  SMBus device : 8086 A123 class=0C0500 status=Success
0:723  0:000  SMBus CmdReg: 0x3
0:723  0:000  Scanning SMBus [8086:A123], mmio: 0xDF34A004, ioport: 0xF040, hostc: 0x11
0:723  0:000  Slots to scan [8]...
0:723  0:000  SPD[0]: Got invalid type 0 @0x50. Will set page and retry.
0:724  0:000  SPD[0]: Type 12 @0x50
0:742  0:017  XMP Profile1: 6*125 0 ns
0:742  0:000  Found module with XMP version 2.0
0:742  0:000  DDR speed 2132MHz
0:742  0:000  Slot: 0 Type 26 8192MB 2132MHz Vendor=Corsair PartNo=CMK16GX4M2A2666C16 SerialNo=0000000000000000
0:742  0:000  SPD[2]: Type 12 @0x52
0:760  0:017  XMP Profile1: 6*125 0 ns
0:760  0:000  Found module with XMP version 2.0
0:760  0:000  DDR speed 2132MHz
0:760  0:000  Slot: 2 Type 26 8192MB 2132MHz Vendor=Corsair PartNo=CMK16GX4M2A2666C16 SerialNo=0000000000000000
0:761  0:000  === [ GetAcpiTablesList ] =================================
0:761  0:000  Get Acpi Tables List from RSDT:
0:761  0:000   - [00]: FACP  A M I  len=132
0:761  0:000   - [01]: APIC  A M I  len=132
0:761  0:000   - [02]: FPDT  A M I  len=68
0:761  0:000   - [03]: DBG2   len=84
0:761  0:000   - [04]: MCFG  A M I  len=60
0:761  0:000   - [05]: SSDT  SataTabl len=912
0:761  0:000   - [06]: FIDT  A M I len=156
0:761  0:000   - [07]: SSDT  SaSsdt  len=12628
0:761  0:000   - [08]: SSDT  PegSsdt len=9534
0:761  0:000   - [09]: HPET  SKL len=56
0:761  0:000   - [10]: SSDT  OEM_RTD3 len=36
0:761  0:000   - [11]: SSDT  xh_rvp08 len=2835
0:761  0:000   - [12]: UEFI  EDK2     len=66
0:761  0:000   - [13]: SSDT  CpuSsdt len=3806
0:761  0:000   - [14]: LPIT  SKL len=148
0:761  0:000   - [15]: WSMT  SKL len=40
0:761  0:000   - [16]: SSDT  sensrhub len=671
0:761  0:000   - [17]: SSDT  PtidDevc len=12290
0:761  0:000   - [18]: DBGP   len=52
0:761  0:000  Calibrated TSC frequency =3504480800 =3504MHz
0:761  0:000  === [ GetUserSettings ] ===================================
0:761  0:000  USB FixOwnership: no
0:761  0:000   - final DSDT Fix mask=00000000
0:761  0:000  PatchesDSDT: 1 requested
0:761  0:000   - [00]: (Rename HDAS to HDEF) lenToFind: 4, lenToReplace: 4
0:761  0:000  ChassisType: 0xD
0:763  0:001  Using smbios.plist at path: EFI\CLOVER\smbios.plist, Status=Not Found
0:764  0:001  === [ ScanVolumes ] =======================================
0:764  0:000  Found 4 volumes with blockIO
0:764  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)
0:765  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,DB7B9526-4A3A-4990-BE47-FCB14EDE8881,0x28,0x64000)
0:765  0:000          Result of bootcode detection: bootable unknown (legacy)
0:767  0:001          This is SelfVolume !!
0:767  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,9B386B70-E771-4B34-BA19-0394D1680469,0x64028,0xE8C6E940)
0:768  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,5753138E-8101-4527-9272-C16C29554576,0xE8CD2968,0x135F20)
0:768  0:000  === [ InitTheme ] =========================================
0:771  0:003  Using theme 'tonymacx86' (EFI\CLOVER\themes\tonymacx86)
0:773  0:001  Choosing theme tonymacx86
0:773  0:000  after NVRAM boot-args=dart=0
0:773  0:000  === [ AddCustomLegacy ] ===================================
0:773  0:000  Scanning legacy ...
0:773  0:000   0: 'Whole Disc Boot' (legacy) not legacy
0:773  0:000   1: 'EFI' (legacy) not legacy
0:773  0:000   2: 'macOS' (legacy) not legacy
0:773  0:000   3: 'Recovery HD' (legacy) not legacy
0:773  0:000  === [ ScanLoader ] ========================================
0:773  0:000  - [01]: 'EFI'
0:833  0:059  - [02]: 'macOS'
0:889  0:055          AddLoaderEntry for Volume Name=macOS
0:906  0:017          Check if volume Is Hibernated:
0:906  0:000      Check sleep image 'by signature':
0:967  0:060      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found
0:967  0:000      using default sleep image name = \private\var\vm\sleepimage
1:042  0:075      sleepimage not found -> Not Found
1:042  0:000          hibernated: no - sign
1:103  0:061  - [03]: 'Recovery HD'
1:105  0:001          AddLoaderEntry for Volume Name=Recovery HD
1:178  0:073  === [ AddCustomTool ] =====================================
1:181  0:003  found tool \EFI\CLOVER\tools\Shell64U.efi
1:181  0:000  Checking EFI partition Volume 1 for Clover
1:184  0:003   Found Clover
1:196  0:011  === [ FindDefaultEntry ] ==================================
1:196  0:000  === [ GetEfiBootDeviceFromNvram ] =========================
1:197  0:000   - found entry 0. 'Boot Mac OS X from macOS', Volume 'macOS', DevicePath 'PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,9B386B70-E771-4B34-BA19-0394D1680469,0x64028,0xE8C6E940)\System\Library\CoreServices\boot.efi'
1:197  0:000  DefaultIndex=0 and MainMenu.EntryCount=8
1:320  0:123  Found Mouse device:
1:324  0:004  GUI ready
7:459  6:134  === [ StartLoader ] =======================================
7:459  0:000  Finally: Bus=100128kHz CPU=3504MHz
7:459  0:000  Loading boot.efi  status=Success
7:601  0:142  GetOSVersion: 10.12.4 (16E195)
7:601  0:000  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS
7:601  0:000  Filtering KextPatches:
7:601  0:000   - [00]: AppleAHCIPort (External icons patch) :: BinPatch :: [OS: 10.12.4 | MatchOS: All | MatchBuild: All] ==> allowed
7:601  0:000   - [01]: AppleUSBXHCIPCI (Increase 15 port limit to 26 in AppleUSBXHCIPCI) :: BinPatch :: [OS: 10.12.4 | MatchOS: All | MatchBuild: All] ==> allowed
7:601  0:000   - [02]: AppleHDA (10.12-AppleHDA/Realtek ALC...) :: BinPatch :: [OS: 10.12.4 | MatchOS: All | MatchBuild: All] ==> allowed
7:601  0:000   - [03]: AppleHDA (10.9-10.12-AppleHDA/Realtek ALC1150) :: BinPatch :: [OS: 10.12.4 | MatchOS: All | MatchBuild: All] ==> allowed
7:601  0:000   - [04]: AppleHDA (AppleHDA/Resources/xml>zml) :: BinPatch :: [OS: 10.12.4 | MatchOS: All | MatchBuild: All] ==> allowed
7:601  0:000  === [ PatchSmbios ] =======================================
7:601  0:000  insert table 9 for dev 1F:6
7:601  0:000  insert table 9 for dev 0:0
7:602  0:000  Channels: 2
7:602  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
7:602  0:000  SMBIOS Type 17 Index = 0 => 0 0:
7:602  0:000  BANK0 DIMM0 2132MHz 8192MB
7:602  0:000  SMBIOS Type 17 Index = 1 => 2 2:
7:602  0:000  BANK1 DIMM0 2132MHz 8192MB
7:602  0:000  SMBIOS Type 17 Index = 2 => 1 1:
7:602  0:000  BANK0 DIMM1 EMPTY
7:602  0:000  SMBIOS Type 17 Index = 3 => 3 3:
7:602  0:000  BANK1 DIMM1 EMPTY
7:602  0:000  mTotalSystemMemory = 16384
7:602  0:000  NumberOfMemoryDevices = 4
7:602  0:000  Type20[0]->End = 0x7FFFFF, Type17[0] = 0x2000
7:602  0:000  Type20[1]->End = 0xFFFFFF, Type17[1] = 0x6000
7:602  0:000  Table 131 is present, CPUType=10
7:602  0:000  Change to: 605
7:602  0:000  === [ PatchACPI ] =========================================
7:602  0:000  RSDT 0x8A21D028
7:602  0:000  FADT from RSDT: 0x8A21D170
7:602  0:000  XSDT 0x8A21D0A0
7:602  0:000  FADT from XSDT: 0x8A246BE8
7:602  0:000  Xsdt reallocation done
7:602  0:000  old FADT length=114
7:603  0:001  Apply DsdtFixMask=0x00000000 old way
7:603  0:000     drop _DSM mask=0x0000
7:603  0:000  === [ FixBiosDsdt ] =======================================
7:603  0:000  VideoCard devID=0x19128086
7:603  0:000  DisplayADR1[0] = 0x20000, DisplayADR2[0] = 0xFFFE
7:603  0:000  USBADR[0] = 0x140000 and PCIe = 0xFFFE
7:603  0:000  Found Airport Atheros at 0x1C0002, 0x0, DeviceID=0x003E
7:603  0:000  USBADR[1] = 0x1C0004 and PCIe = 0x0
7:603  0:000  Audio HDA (addr:0x1F0003) setting specified layout-id=1 (0x1)
7:603  0:000  Patching DSDT:
7:603  0:000   - [00]: pattern 48444153, patched at: [ (2E7) (12) (12) (C461) (15BD) (84) (D) (2B) (32) (66) (A5) (C3) ]
7:603  0:000  first CPU found at B08D offset B090
7:603  0:000  score candidate at B089
7:603  0:000  score inserted in acpi_cpu_score _PR_
7:603  0:000  Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _PR_
7:604  0:000  Found PCIROOTUID = 0
7:604  0:000  === [ ACPIDropTables ] ====================================
7:604  0:000  === [ PatchAllSSDT ] ======================================
7:604  0:000  Patch table: SSDT  SataTabl
7:604  0:000   SSDT len = 0x390
7:604  0:000  Patching SSDT:
7:604  0:000   - [00]: pattern 48444153, bin not found / already patched!
7:604  0:000  Patch table: SSDT  SaSsdt
7:604  0:000   SSDT len = 0x3154
7:604  0:000  Patching SSDT:
7:604  0:000   - [00]: pattern 48444153, bin not found / already patched!
7:604  0:000  Patch table: SSDT  PegSsdt
7:604  0:000   SSDT len = 0x253E
7:604  0:000  Patching SSDT:
7:604  0:000   - [00]: pattern 48444153, bin not found / already patched!
7:604  0:000  Patch table: SSDT  OEM_RTD3
7:604  0:000   SSDT len = 0x24
7:604  0:000  Patching SSDT:
7:604  0:000   - [00]: pattern 48444153, the patch is too large!
7:604  0:000  Patch table: SSDT  xh_rvp08
7:604  0:000   SSDT len = 0xB13
7:604  0:000  Patching SSDT:
7:604  0:000   - [00]: pattern 48444153, bin not found / already patched!
7:604  0:000  Patch table: SSDT  CpuSsdt
7:604  0:000   SSDT len = 0xEDE
7:604  0:000  Patching SSDT:
7:604  0:000   - [00]: pattern 48444153, bin not found / already patched!
7:604  0:000  Patch table: SSDT  sensrhub
7:604  0:000   SSDT len = 0x29F
7:604  0:000  Patching SSDT:
7:604  0:000   - [00]: pattern 48444153, bin not found / already patched!
7:604  0:000  Patch table: SSDT  PtidDevc
7:604  0:000   SSDT len = 0x3002
7:604  0:000  Patching SSDT:
7:604  0:000   - [00]: pattern 48444153, bin not found / already patched!
7:604  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
7:604  0:000   Xsdt has tables count=19
7:604  0:000  corrected XSDT length=188
7:604  0:000  CPUBase=0 and ApicCPUBase=1 ApicCPUNum=1
7:604  0:000  === [ RestSetupOSX ] ======================================
7:604  0:000  EdidDiscovered size=128
7:604  0:000  00 | 00 FF FF FF FF FF FF 00 21 29 A3 22 55 01 00 00
7:604  0:000  16 | 0F 12 01 03 80 2F 1D 78 EA DE 95 A3 54 4C 99 26
7:604  0:000  32 | 0F 50 54 BF EF 80 90 4F 71 4F 95 00 95 0F B3 00
7:604  0:000  48 | 01 01 01 01 01 01 08 39 90 30 62 1A 27 40 68 B0
7:604  0:000  64 | 36 00 D9 28 11 00 00 19 00 00 00 FD 00 38 4C 1F
7:604  0:000  80 | 53 10 00 0A 20 20 20 20 20 20 00 00 00 FF 00 48
7:604  0:000  96 | 32 32 34 57 45 38 34 30 30 33 34 31 00 00 00 FC
7:604  0:000  112 | 00 48 32 32 34 57 0A 20 20 20 20 20 20 20 00 41
7:604  0:000  Intel Intel HD Graphics 530 [8086:1912] :: PciRoot(0x0)\Pci(0x2,0x0)
7:604  0:000  Intel GFX revision  =0x6
7:604  0:000   RCBA disabled; cannot use it
7:604  0:000  HDA Controller [8086:A170] :: PciRoot(0x0)\Pci(0x1F,0x3) => setting specified layout-id=1 (0x1)
7:604  0:000  stringlength = 1252
7:604  0:000  CurrentMode: Width=1680 Height=1050
7:604  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 86BAED18
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 86BAED18
7:618  0:013  MSR 0x1B0   set to        00000000
7:619  0:001  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
7:622  0:003  Custom boot is disabled


And here is my config.plist below:

Code:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
    <key>ACPI</key>
    <dict>
        <key>DSDT</key>
        <dict>
            <key>Debug</key>
            <false/>
            <key>DropOEM_DSM</key>
            <false/>
            <key>Fixes</key>
            <dict>
                <key>AddDTGP_0001</key>
                <false/>
                <key>AddHDMI_8000000</key>
                <false/>
                <key>AddIMEI_80000</key>
                <false/>
                <key>AddMCHC_0008</key>
                <false/>
                <key>AddPNLF_1000000</key>
                <false/>
                <key>DeleteUnused_400000</key>
                <false/>
                <key>FIX_ACST_4000000</key>
                <false/>
                <key>FIX_ADP1_800000</key>
                <false/>
                <key>FIX_INTELGFX_100000</key>
                <false/>
                <key>FIX_RTC_20000</key>
                <false/>
                <key>FIX_S3D_2000000</key>
                <false/>
                <key>FakeLPC_0020</key>
                <false/>
                <key>FiX_TMR_40000</key>
                <false/>
                <key>FiX_WAK_200000</key>
                <false/>
                <key>FixAirport_4000</key>
                <false/>
                <key>FixDarwin_0002</key>
                <false/>
                <key>FixDisplay_0100</key>
                <false/>
                <key>FixFirewire_0800</key>
                <false/>
                <key>FixHDA_8000</key>
                <false/>
                <key>FixHPET_0010</key>
                <false/>
                <key>FixIDE_0200</key>
                <false/>
                <key>FixIPIC_0040</key>
                <false/>
                <key>FixLAN_2000</key>
                <false/>
                <key>FixRegions_10000000</key>
                <false/>
                <key>FixSATA_0400</key>
                <false/>
                <key>FixSBUS_0080</key>
                <false/>
                <key>FixShutdown_0004</key>
                <false/>
                <key>FixUSB_1000</key>
                <false/>
                <key>NewWay_80000000</key>
                <false/>
            </dict>
            <key>Name</key>
            <string>DSDT.aml</string>
            <key>Patches</key>
            <array>
                <dict>
                    <key>Comment</key>
                    <string>Rename HDAS to HDEF</string>
                    <key>Find</key>
                    <data>
                    SERBUw==
                    </data>
                    <key>Replace</key>
                    <data>
                    SERFRg==
                    </data>
                </dict>
            </array>
            <key>ReuseFFFF</key>
            <false/>
        </dict>
        <key>HaltEnabler</key>
        <false/>
        <key>SSDT</key>
        <dict>
            <key>DropOem</key>
            <false/>
            <key>Generate</key>
            <dict>
                <key>CStates</key>
                <false/>
                <key>PStates</key>
                <false/>
            </dict>
        </dict>
    </dict>
    <key>Boot</key>
    <dict>
        <key>Arguments</key>
        <string>dart=0</string>
        <key>DefaultVolume</key>
        <string>macOS</string>
        <key>Legacy</key>
        <string>PBR</string>
        <key>Log</key>
        <true/>
        <key>Secure</key>
        <false/>
        <key>Timeout</key>
        <integer>3</integer>
        <key>XMPDetection</key>
        <string>NO</string>
    </dict>
    <key>Devices</key>
    <dict>
        <key>Audio</key>
        <dict>
            <key>Inject</key>
            <string>1</string>
        </dict>
        <key>FakeID</key>
        <dict>
            <key>ATI</key>
            <string>0x0</string>
            <key>IMEI</key>
            <string>0x0</string>
            <key>IntelGFX</key>
            <string>0x0</string>
            <key>LAN</key>
            <string>0x0</string>
            <key>NVidia</key>
            <string>0x0</string>
            <key>SATA</key>
            <string>0x0</string>
            <key>WIFI</key>
            <string>0x0</string>
            <key>XHCI</key>
            <string>0x0</string>
        </dict>
        <key>USB</key>
        <dict>
            <key>FixOwnership</key>
            <false/>
            <key>Inject</key>
            <false/>
        </dict>
        <key>UseIntelHDMI</key>
        <false/>
    </dict>
    <key>DisableDrivers</key>
    <array>
        <string>Nothing</string>
    </array>
    <key>GUI</key>
    <dict>
        <key>Hide</key>
        <array>
            <string>Windows</string>
            <string>\EFI\BOOT\BOOTX64.EFI</string>
        </array>
        <key>Language</key>
        <string>en:0</string>
        <key>Mouse</key>
        <dict>
            <key>Enabled</key>
            <true/>
            <key>Speed</key>
            <integer>8</integer>
        </dict>
        <key>Scan</key>
        <dict>
            <key>Entries</key>
            <true/>
            <key>Legacy</key>
            <string>First</string>
            <key>Tool</key>
            <true/>
        </dict>
        <key>ScreenResolution</key>
        <string>1920x1080</string>
        <key>Theme</key>
        <string>tonymacx86</string>
    </dict>
    <key>Graphics</key>
    <dict>
        <key>Inject</key>
        <dict>
            <key>ATI</key>
            <false/>
            <key>Intel</key>
            <true/>
            <key>NVidia</key>
            <false/>
        </dict>
    </dict>
    <key>KernelAndKextPatches</key>
    <dict>
        <key>AppleRTC</key>
        <true/>
        <key>AsusAICPUPM</key>
        <true/>
        <key>KernelCpu</key>
        <false/>
        <key>KernelHaswellE</key>
        <false/>
        <key>KernelLapic</key>
        <false/>
        <key>KernelPm</key>
        <true/>
        <key>KextsToPatch</key>
        <array>
            <dict>
                <key>Comment</key>
                <string>External icons patch</string>
                <key>Find</key>
                <data>
                RXh0ZXJuYWw=
                </data>
                <key>Name</key>
                <string>AppleAHCIPort</string>
                <key>Replace</key>
                <data>
                SW50ZXJuYWw=
                </data>
            </dict>
            <dict>
                <key>Comment</key>
                <string>Increase 15 port limit to 26 in AppleUSBXHCIPCI</string>
                <key>Find</key>
                <data>
                g710////EA==
                </data>
                <key>Name</key>
                <string>AppleUSBXHCIPCI</string>
                <key>Replace</key>
                <data>
                g710////Gw==
                </data>
            </dict>
            <dict>
                <key>Comment</key>
                <string>10.12-AppleHDA/Realtek ALC...</string>
                <key>Find</key>
                <data>
                ihnUEQ==
                </data>
                <key>Name</key>
                <string>AppleHDA</string>
                <key>Replace</key>
                <data>
                AAAAAA==
                </data>
            </dict>
            <dict>
                <key>Comment</key>
                <string>10.9-10.12-AppleHDA/Realtek ALC1150</string>
                <key>Find</key>
                <data>
                ixnUEQ==
                </data>
                <key>Name</key>
                <string>AppleHDA</string>
                <key>Replace</key>
                <data>
                AAnsEA==
                </data>
            </dict>
            <dict>
                <key>Comment</key>
                <string>AppleHDA/Resources/xml&gt;zml</string>
                <key>Find</key>
                <data>
                eG1sLnps
                </data>
                <key>Name</key>
                <string>AppleHDA</string>
                <key>Replace</key>
                <data>
                em1sLnps
                </data>
            </dict>
        </array>
    </dict>
    <key>RtVariables</key>
    <dict>
        <key>BooterConfig</key>
        <string>0x28</string>
        <key>CsrActiveConfig</key>
        <string>0x3</string>
    </dict>
    <key>SMBIOS</key>
    <dict>
        <key>BiosReleaseDate</key>
        <string>09/03/2013</string>
        <key>BiosVendor</key>
        <string>Apple Inc.</string>
        <key>BiosVersion</key>
        <string>IM142.88Z.0118.B00.1309031249</string>
        <key>Board-ID</key>
        <string>Mac-27ADBB7B4CEE8E61</string>
        <key>BoardManufacturer</key>
        <string>Apple Inc.</string>
        <key>BoardType</key>
        <integer>10</integer>
        <key>ChassisAssetTag</key>
        <string>iMac-Aluminum</string>
        <key>ChassisManufacturer</key>
        <string>Apple Inc.</string>
        <key>ChassisType</key>
        <string>13</string>
        <key>Family</key>
        <string>iMac</string>
        <key>Manufacturer</key>
        <string>Apple Inc.</string>
        <key>Mobile</key>
        <false/>
        <key>ProductName</key>
        <string>iMac14,2</string>
        <key>SerialNumber</key>
        <string>C02PKYWCFLHH</string>
        <key>Trust</key>
        <false/>
        <key>Version</key>
        <string>1.0</string>
    </dict>
    <key>SystemParameters</key>
    <dict>
        <key>InjectKexts</key>
        <string>YES</string>
        <key>InjectSystemID</key>
        <true/>
        <key>NvidiaWeb</key>
        <false/>
    </dict>
</dict>
</plist>

Hope you can help and thanks so much again,
Lucy xx
 
ok so I got hold of a Asus ROG Maximus VIII Impact motherboard and tried to install Sierra 10.12.4 but I got a lot of error messages.
I did the fix for bios,
Extreme Tweeker tab
  • AI Overclocker Tuner > X.M.P.
  • Extreme Tweeking > Enable
Advanced Items tab
  • System Agent (SA) Configuration > VT-d > Disable
  • PCH Configuration > IOAPIC 24-119 > Disabled
  • USB Configuration > Legacy USB Support > Auto
  • USB Configuration > XHCI Hand Off > Enabled
  • APM Configuration > Power on by PCI - E/PCI > Disabled
Boot Menu tab
  • Fast Boot > Disabled
  • Boot Logo Display > Disabled
  • Secure Boot > OS Type > Other OS
  • Boot Option 1 > USB installer thumb drive (the UEFI choice if there are two entries)
Exit > Save Changes

which chedda7 supplied and made sure my boot flag's where all correct, it installed and it loaded up.
however
the wireless is not working
0 sound as all the driver's don't work????
onboard graphics is sluggish
and anything less then 8 gigs memory is very laggy
as well the usb3 doesn't work. <- probably a fix for that
and I used a i7 cpu which worked quite nicely

so it is possible to get OS X Sierra working but the system seams unstable.
 
ok so I got hold of a Asus ROG Maximus VIII Impact motherboard and tried to install Sierra 10.12.4 but I got a lot of error messages.
I did the fix for bios,
Extreme Tweeker tab
  • AI Overclocker Tuner > X.M.P.
  • Extreme Tweeking > Enable
Advanced Items tab
  • System Agent (SA) Configuration > VT-d > Disable
  • PCH Configuration > IOAPIC 24-119 > Disabled
  • USB Configuration > Legacy USB Support > Auto
  • USB Configuration > XHCI Hand Off > Enabled
  • APM Configuration > Power on by PCI - E/PCI > Disabled
Boot Menu tab
  • Fast Boot > Disabled
  • Boot Logo Display > Disabled
  • Secure Boot > OS Type > Other OS
  • Boot Option 1 > USB installer thumb drive (the UEFI choice if there are two entries)
Exit > Save Changes

which chedda7 supplied and made sure my boot flag's where all correct, it installed and it loaded up.
however
the wireless is not working
0 sound as all the driver's don't work????
onboard graphics is sluggish
and anything less then 8 gigs memory is very laggy
as well the usb3 doesn't work. <- probably a fix for that
and I used a i7 cpu which worked quite nicely

so it is possible to get OS X Sierra working but the system seams unstable.

Thank you dbNine for trying to get the board working with Sierra.

I know Pkerry12 has everything working apart from wireless. But no reply from that user.

I think I will have to wait a little longer until someone has some success with this model of board :crazy:.

I have the same sort of issues as yourself.

Network working fine
Bluetooth working fine
No sound
No wireless
Onboard Graphics not sure as it flickers on login
Bootup slow but think it's because it is looking for something.

Maybe someone in time will look at my boot.log and config.plist and see where the problem is.

Thanks so much again for trying to help me :)
 
Hi I manage to make all the stuff work except wifi.

Hardware:

GTX980 asus rog
Maximus VIII impact
i5 6500k
12GB RAM GSKILL
240 SSD (corsair)

so steps:

a) install osx normally with the bios default except:
VT-D to off and CFG disabled, usb 3.0 to XHCI and no fast boot.
b) install multibeast with uefi and the network drivers (all) just in case :) And ALC 1150 for sound. It will not work for the moment (the sound). Add the web drivers of nvidia also.

c) install nvidia web drivers, (I have a gtx 980) asus rog. Same as mobo.

d) install clover and set and option for graphic card to work. It was to enable simulation of NVRAM.
EmuVariableUefi-64
e) restart. Verify graphics are with nvidia, verify booting works normal and network works.

f) only audio is pending to get installed. So we will enable all audio cards: mother board + hdmi.

So open:
1) 09168-EFI-Mounter-v3.zip (Efi Mounter) this is to mount efi partition
2) verify EFI partition is open on the FINDER
3) follow the tutorial on the file: ssdt_hdef-1-100-hdas.zip (I think this is a patch for the kernel)
4) reboot
5) follow the script: audio_cloverHDMI-120.command.zip
I don't have that much explanations but all is working with this. I found the files on this forum or in internet. I'm sure you can manage to find them with the name.

I attached all the files to the post and the screen shot to prove all it's working.
 

Attachments

  • 98168-EFI-Mounter-v3.zip
    33.4 KB · Views: 136
  • audio_cloverHDMI-120.command.zip
    9.7 KB · Views: 133
  • ssdt_hdef-1-100-hdas.zip
    43.8 KB · Views: 136
  • Captura de pantalla 2017-06-06 a las 23.52.15.png
    Captura de pantalla 2017-06-06 a las 23.52.15.png
    1.1 MB · Views: 301
Hiya romeritoCL,

I can't wait to try this and hopefully I can get my sound working. Thanks so much for the information.

Lucy x
 
Status
Not open for further replies.
Back
Top