Contribute
Register

ASRock Deskmini 110 issues

Status
Not open for further replies.
Hi John,
Your post is very helpful. I used your EFI_FIX_TYPEC_VER.zip, after booted by Clover on USB disk, no any other SSD/HDD showed in Disk Utility except the boot USB disk.

Would you please help to suggest?

Settings:
1. Vt-d (Disable)
2. IOAPIC 24-119 Entries (Disable)
3. COM (Disbble)
4. Secure Mode (Disable)
5. USB XHCI Handoff (Enable)
6. Ever put SATA-100-series-unsupported.kext on \EFI\CLOVER\kexts\10.12

System:
- I5 6500
- 8GBx2 GSkill DDR4 2133
- Samsung 830 SDD 120G (SATA)
- Hitachi HDD 500G (SATA)
- Liteon T10 SSD 240G (NVME)

My config files are only for loading the installed macOS,not for intalling.
And the clover version is too low for instlling 10.12.4.
Please use the latest unibeast to make a installing-os-usb driver.The less modification on the usb-efi, the better.
 
Did you attach the files?
Sorry. Yes I did but I had to delete them. Now there are new files attached. If you can make HDMI audio work that would be nice.

What is left is Wake up from sleep . Although not a priority for me it would be nice to have. But the system consumes low amounts of energy at idle already:

Screen Shot.png
 
How come my asrock doesn't have 4k resolution option? i'm using hdmi here. please help if i use injectintel my screen tearing badly.
Spec :i5 6500
 
How come my asrock doesn't have 4k resolution option? i'm using hdmi here. please help if i use injectintel my screen tearing badly.
Spec :i5 6500

Currently, there are only a few onboard HDMI can have 4K output, for Deskmini 110, you should use DP port.
 
I can not find AHCI option for Deskmini, likely it is enable as default.
I am getting a "row of pluses" (and nothing else forever) when attempting to install on the DeskMini using UEFI Unibeast.

I have seen this on other system installs when attempting to install using UEFI instead of Legacy Unibeast and the disk access is not set correctly.

Questions
1. Is there an option for AHCI versus Legacy disk access on the DeskMini and where is it? (Is this the Storage OpROM Policy below?)
2. Which mode should be used for the install (whether an option is available or not)?

upload_2017-4-3_8-42-1.png
 
Last edited:
My config files are only for loading the installed macOS,not for intalling.
And the clover version is too low for instlling 10.12.4.
Please use the latest unibeast to make a installing-os-usb driver.The less modification on the usb-efi, the better.
I see you mentioned before Bluethooth in DW1560 was not working well, is it working now?
 
100/com can't update this rom, but I have success update the 7.0 bios and install the MacOS

I am 100/com too, would u provide some more details about how u made that?

Thank u in advance
 
I am 100/com too, would u provide some more details about how u made that?

Thank u in advance
I upgraded my 110/COM to BIOS 7.0 by sth. similar to "Instant Flash - Auto DHCP".
 
Status
Not open for further replies.
Back
Top