[README] Common (some unsolved) Problems in 10.12 Sierra

[zilath]

I have problem on 10.12.4 with night shift only on ati hd 5770 oob, result wrong colored glitch, nothing else. Does hd 6870 work well? 10.12 first release works perfectly.

News. Installed 10.12.3 with radeon hd 6870. No problem.

 

[gendigbadig]

Hi, RehabMan,

I need your help, my volume button (Fn+F6/F7) and other playback button (Prev = Scroll Button, Play/Pause=Pause Button, Next=Insert Button) are not working yet. I've already using VoodooPS2Controller.kext v1.8.25 (RehabMan-Voodoo-2016-1208) on macOS Sierra 10.12.4. Brightness key not work too but as you said on 10.12.4 Notes,. I use Brightness by bergdesign for it. Can you help me for volume and playback button? What I should provide to you?

My Laptop is HP Probook 430 G2 Broadwell

Thanks

 

[RehabMan]

Hi, RehabMan,

I need your help, my volume button (Fn+F6/F7) and other playback button (Prev = Scroll Button, Play/Pause=Pause Button, Next=Insert Button) are not working yet. I've already using VoodooPS2Controller.kext v1.8.25 (RehabMan-Voodoo-2016-1208) on macOS Sierra 10.12.4. Brightness key not work too but as you said on 10.12.4 Notes,. I use Brightness by bergdesign for it. Can you help me for volume and playback button? What I should provide to you?

My Laptop is HP Probook 430 G2 Broadwell

Thanks

Your laptop has a guide:
https://www.tonymacx86.com/threads/...book-using-clover-uefi-hotpatch-10-11.189416/

Make sure you followed it as written.
And if you have an issue, read guide, post #1, "Problem Reporting". Reply in guide thread, not here.

 

[ben9923]

Hi, RehabMan,

I need your help, my volume button (Fn+F6/F7) and other playback button (Prev = Scroll Button, Play/Pause=Pause Button, Next=Insert Button) are not working yet. I've already using VoodooPS2Controller.kext v1.8.25 (RehabMan-Voodoo-2016-1208) on macOS Sierra 10.12.4. Brightness key not work too but as you said on 10.12.4 Notes,. I use Brightness by bergdesign for it. Can you help me for volume and playback button? What I should provide to you?

My Laptop is HP Probook 430 G2 Broadwell

Thanks

Your laptop has a guide.
https://www.tonymacx86.com/threads/...book-using-clover-uefi-hotpatch-10-11.189416/

 

[gfoury]

I just installed 10.12.4 on my Lenovo u430.
And I think I see what you're referring to. It is more like a jerkyness at login and after login for a few seconds...

This sounds a lot like what I saw on the 800MHz Core M on 10.11, before we had the right platform-id and the right connector mapping.

My best theory at the time was that the jerkiness was that the eDP display wasn't really "plugged in" properly according to the connector map, and the GPU was flailing around trying to detect which displays were plugged in where.

By the way, thank you for saving me a weekend trying to installl 10.12 for no particularly good reason.

 

[Andrw0830]

This sounds a lot like what I saw on the 800MHz Core M on 10.11, before we had the right platform-id and the right connector mapping.

My best theory at the time was that the jerkiness was that the eDP display wasn't really "plugged in" properly according to the connector map, and the GPU was flailing around trying to detect which displays were plugged in where.

By the way, thank you for saving me a weekend trying to installl 10.12 for no particularly good reason.

Yeah there was a post on last page 89 saying that using a bogus ig-platform-id caused no lag, but of course no QE/CI so we may be on something on what is causing it. Question is, is there another ig-platform-id that works properly for laptops for Intel 4600? The only other one that doesn't seem to cause my built-in LCD to show artifacts is "0x0a260005" but the lag is still there.

 

[RehabMan]

This sounds a lot like what I saw on the 800MHz Core M on 10.11, before we had the right platform-id and the right connector mapping.

My best theory at the time was that the jerkiness was that the eDP display wasn't really "plugged in" properly according to the connector map, and the GPU was flailing around trying to detect which displays were plugged in where.

By the way, thank you for saving me a weekend trying to installl 10.12 for no particularly good reason.

I will run with your idea and try to eliminate unused ports from the framebuffer...

 

[mm2margaret]

Moving to desktop.....

 

[RehabMan]

After upgrading to 10.12.4, my Ethernet ports are not working. Wifi is, but any Ethernet LAN port will not work. I've tried three different ethernet cards, including my internal motherboard card/port, and none are working. I have the latest IntelMausi driver from ReHabMan, (3/21), but nothing seems to work.
None of the cards will accept DHCP. You can manually address them, and they do respond to a self ping, but they cannot ping anywhere else. Not to my local router, (or any local IP addresses), and not to the Internet.

Internal Ethernet chip is: Intel® I218V, 1 x Gigabit LAN Controller

$ kextstat | grep Mausi

64 0 0xffffff7f83ac3000 0x24000 0x24000 com.insanelymac.IntelMausiEthernet (2.2.1) 43B3C3B1-E032-3C2B-8598-320889964F57 <53 12 5 4 3 1>

ping 8.8.8.8

PING 8.8.8.8 (8.8.8.8): 56 data bytes
ping: sendto: No route to host
ping: sendto: No route to host
Request timeout for icmp_seq 0
ping: sendto: No route to host
Request timeout for icmp_seq 1
ping: sendto: No route to host
Request timeout for icmp_seq 2
ping: sendto: No route to host
Request timeout for icmp_seq 3
ping: sendto: No route to host (but adding a default route doesn't work either, as the route shows as already added (or the Wifi card wouldn't be able to get to the Internet).

I do have loaded the latest drivers from NVidia for 10.12.4. Most everything else works, just would like to get one of my wired Ethernet ports working.

I have an Asus X99-A II, 64 GB of DDR4 RAM, NVMe Samsung drive, GTX 980 TI with the latest drivers from NVidia, and of course 10.12.4. Most everything works. Just would like to get my LAN cards working.

Anyone else having this issue?

This forum is for laptops.
Desktop questions are off-topic.

Please post your question in the appropriate desktop forum.

 

[toi1em]

Well, 10.12.3 worked perfectly too for me... Hope next update will bring us a fix or someone will find a good solution for those issues sooner

Are you solve the problem? I am use an MSI too and still running 10.12.3, maybe i just stay at current version.