Contribute
Register

UniBeast: Install macOS Sierra on Any Supported Intel-based PC

it is written in my profile info..l you need more? What exactly?
Thanks for the idea about Graphic card.. did not know it can be a proiblem

There's no native support for Kaby Lake CPUs, means that you will run into issues and have to use Safe mode until you have a proper custom DSDT file for the CPU. So right there I don't think you will have success easily.

2nd, you mention Boot OSX from USB. If you read the Guide here, then you should know that you need to configure your bios for booting the Unibeast as UEFI device. If you setup the BIOS correctly and have the USB plugged in, you should pick UEFI USB device in the boot order menu of your motherboard and make that the 1st device to boot.
 
Installing on a Dell Optiplex 7040:
Mobo: Q170 Chipset (Not an option to add to my signature build)
CPU: 6th Gen i7 (skylake)
Graphics: Using HD530, also has ATI R7 350x
32GB RAM
WD 250 SSD
- http://i.dell.com/sites/doccontent/...ecemea-optiplex-7040-technical-spec-sheet.pdf

Disabled Serial
Followed all available BIOS options

Doing UEFI Boot, fresh HDD, no windows installation.

Used -x -v -f and the stock options



I get stuck right after :
Com.apple.AppleFSCompressionTyleZlib kmod start
com.apple.Appl **NOW STUCK HERE***




Any ideas?
 

Attachments

  • 20170405_185048.jpg
    20170405_185048.jpg
    4.5 MB · Views: 122
Hello all, I just bought gigabyte P15, Finished Step 3,But Step4 and Boot Mac OS X from USB then screen stop apple logo. and can't see any installing step.

Any clue?

Gigabyte P15:

  • CPU
    7th Generation Intel® Core™ i7-7700HQ (2.8GHz-3.8GHz)
  • Display
    15.6" Full HD 1920x1080 IPS Anti-Glare LCD
  • System Memory
    8GB DDR4 2400
  • Chipset
    Mobile Intel® HM175 Express Chipset
  • Video Graphics
    Intel® HD Graphics 630
    NVIDIA® Geforce GTX 950M GDDR5 2GB

Rick
 
Hi everybody. Need help. I'm pretty new to Hachintosh..
I made everything according to the list of inctructions but after I have choosen "Boot Macos from USB" I see only black screen. What happens? Any ideas?

Hello all, I just bought gigabyte P15, Finished Step 3,But Step4 and Boot Mac OS X from USB then screen stop apple logo. and can't see any installing step.

Pascal generation GPUs (GTX 10x0) are not supported.

Please note that your Kaby Lake CPU is not natively supported in macOS.
The CPU requires a FakeCPUID (with Skylake ID) to boot.
 
The CPU requires a FakeCPUID (with Skylake ID) to boot.
Sadly... I looking for some of time... still don't know how to FakeCPUID with Skylake ID... Can you help me , Please....
 
Sadly... I looking for some of time... still don't know how to FakeCPUID with Skylake ID... Can you help me , Please....
At the Clover Boot Screen choose Options > Binaries patching > Fake CPUID
 
At the Clover Boot Screen choose Options > Binaries patching > Fake CPUID
I did change fakeCPUID to 0x0506E3 (skylake CPUID)
Now I saw the apple and a bar .....but bar no process.....
But It is good news for me at the moment...
Need more tips ....Thank you.
 
Hi I have a Dell XPS 8900,NVIDI GTX 960
I tried installing macOS Siarra using UniBeast 7.x.
UEFI USB boot does not go past the starting Apple logo.
So I tried the legacy option, where clover boot loader shows the boot options, after selecting macOS Sierra the screen blacks out.
Any support in this regard will be of immense help.
 
Back
Top