Contribute
Register

stuck at IOConsoleUsers

Status
Not open for further replies.
Joined
Sep 1, 2013
Messages
35
Motherboard
H87N-WiFi
CPU
i5 4570
Graphics
HD4600
Mac
  1. iMac
  2. MacBook Air
Mobile Phone
  1. Android
Hi,

Many people like me are having problem that booting suck at IOConsoleUsers. I've had already read almost every thread relate to this, however haven't found any tip helpful.

Basiclly by deleting the Intel iGPU Driver, I can boot the system. But graphics would be terrible.

I've been trying to fix it for days, have complete no idea how to do that. Really hope someone can help me out.

P.S. I followed this guide carefully, rechecked bios settings, monitor connected via HDMI.

p70316-190318-jpg.242484
 

Attachments

  • Archive.zip
    645 KB · Views: 73
  • Clover.zip
    1.4 MB · Views: 79
Last edited:
Hi,

Many people like me are having problem that booting suck at IOConsoleUsers. I've had already read almost every thread relate to this, however haven't found any tip helpful.

Basiclly by deleting the Intel iGPU Driver, I can boot the system. But graphics would be terrible.

I've been trying to fix it for days, have complete no idea how to do that. Really hope someone can help me out.

P.S. I followed this guide carefully, rechecked bios settings, monitor connected via HDMI.

p70316-190318-jpg.242484

Messy setup in config.plist/ACPI/DSDT/Fixes.
Set all to false.
Remove also config.plist/Graphics/EDID.
You should consider going back to Multibeast generated config.plist, because yours is a mess.
Also, you might want to eliminate patched/*.aml as those files could be causing your issue.
In other words, go back to the basics...
And... you do not need FakePCIID kexts for your graphics device...
Don't forget about other requirements:
- digital connection to monitor (VGA not supported)
- DVMT-prealloc 64mb
- VT-d disabled (or dart=0)
 
Messy setup in config.plist/ACPI/DSDT/Fixes.
Set all to false.
Remove also config.plist/Graphics/EDID.
You should consider going back to Multibeast generated config.plist, because yours is a mess.
Also, you might want to eliminate patched/*.aml as those files could be causing your issue.
In other words, go back to the basics...
And... you do not need FakePCIID kexts for your graphics device...
Don't forget about other requirements:
- digital connection to monitor (VGA not supported)
- DVMT-prealloc 64mb
- VT-d disabled (or dart=0)

System is still struck at IOConsoleUsers. Any idea?


P70321-153145.jpg
P70321-153207.jpg
P70321-234412.jpg
 

Attachments

  • IOReg.zip
    613.4 KB · Views: 86
  • Clover.zip
    1.3 MB · Views: 89
Last edited:
Messy setup in config.plist/ACPI/DSDT/Fixes.
Set all to false.
Remove also config.plist/Graphics/EDID.
You should consider going back to Multibeast generated config.plist, because yours is a mess.
Also, you might want to eliminate patched/*.aml as those files could be causing your issue.
In other words, go back to the basics...
And... you do not need FakePCIID kexts for your graphics device...
Don't forget about other requirements:
- digital connection to monitor (VGA not supported)
- DVMT-prealloc 64mb
- VT-d disabled (or dart=0)
I guess something else is wrong. Because I've successfully built my hack once in the same computer, and this time even fresh created Unibeast 7.0.1 USB stick can't boot as well.
 
solved, I took the battery off from the motherborad, waited few minutes, system working.
 
solved, I took the battery off from the motherborad, waited few minutes, system working.

I have same problem, My computer was good but suddenly can't boot and in verbose mode stuck (gIOScreenLockState)

When i saw your solve, i took the battery like you but also not happen any solve!

So, can you talk how you solved the problem exaclty ? Maybe i'm forget something.
 
I have same problem, My computer was good but suddenly can't boot and in verbose mode stuck (gIOScreenLockState)

When i saw your solve, i took the battery like you but also not happen any solve!

So, can you talk how you solved the problem exaclty ? Maybe i'm forget something.

try use an older version of the clover bootloader, r4035, r4049 works for me
 
Status
Not open for further replies.
Back
Top