The Perfect Customac-Pro: X99-A II, i7-6950X, 128GB G.Skill TridentZ, Aorus GTX 1080 TI Xtreme

[Bagi1992]

Guys, I need a small help! My audio is not working... I was able to run the "audio_cloverHDMI-120_v1.0d.command" but I can't run successfully the "audio_cloverALC-120_v1.0d.command". It just stopped. I attach some photo... What is missing? What I am doing wrong? I followed everything in this install guide and I used the attached config.plist and clover folders.
Thanks!

 

[beep]

@Bagi1992 use AppleALC. No patching or messing with scripts is needed.
https://github.com/vit9696/AppleALC

 

[beep]

Not working. The computer restarts.

I was told that using VoodooTSCSync.kext may help with the sleep.

 

[zuscrofa]

hi, Does it work with asus x99-pro/usb 3.1 ?

 

[kgp]

Guys, I need a small help! My audio is not working... I was able to run the "audio_cloverHDMI-120_v1.0d.command" but I can't run successfully the "audio_cloverALC-120_v1.0d.command". It just stopped. I attach some photo... What is missing? What I am doing wrong? I followed everything in this install guide and I used the attached config.plist and clover folders.
Thanks!

Baggi1992, I cannot see that you followed my guide. Your kexts significantly deviate from mine!

I also do not use the clover extensions directory you display above.

Also see the Kernel and Kext Patches Section after a successful cloverALC installation.

By the way did you try the audio_cloverALC-120_v1.0f.command attached below? Anyway if you do not use the HDMI output of your graphic card you can also just use the AppleALC promoted by Beep

 

[kgp]

I was told that using VoodooTSCSync.kext may help with the sleep.

First I would like to know what Thireus did in detail so far concerning the Piker-Alpha patches. I am still waiting on his summary and comments. All other speculations please afterwards here. The VoodooTSCSync.kext might be part of giacomoleopardos approach, which seems to be a different approach. Please don't mix up things at this point.

 

[KevinAGI]

Thanks. I've already tried that method, which I find the best one to bypass the Graphics Policy black screen on MacPro 6,1. No luck, though. I guess I keep doing some kind of mistake on compiling the ssdt. Would you mind to share yours, please? I know it's a different board (Asus X99-A II for me), but that would be helpful anyway. Thank you.

Sure Here is mine. It is a Titan X in in slot 16_1 though. I successfully boot with Display port 1, HDMI, and Display port 4. I have not tried to figure out why I can not boot with DVI and Display port 3 in the combination. The only other combination I remember working was DVI and HDMI, but that was before I got a batch of display port to DVI adapters.

Kevin

 

[kgp]

Not working. The computer restarts.

Thireus, I just performed another update of my originating post/guide concerning the 6950X power management. Can you have a look? I am still waiting for your input and comments.

Cheers!

 

[Bagi1992]

Baggi1992, I cannot see that you followed my guide. Your kexts significantly deviate from mine!

View attachment 243658

I also do not use the clover extensions directory you display above.

Also see the Kernel and Kext Patches Section after a successful cloverALC installation.

View attachment 243659

By the way did you try the audio_cloverALC-120_v1.0f.command attached below? Anyway if you do not use the HDMI output of your graphic card you can also just use the AppleALC promoted by Beep

Yes your right kgp! I was using your guide but for some point it didn't worked to me and i started to mix with
giacomoleopardo's guide...

I would like to use HDMI audio, so thats why I want to use your script but it just stops here:



Last login: Fri Mar 24 10:19:49 on ttys000

Mac-Pro-di-Attila:~ bagi1992$ /Users/bagi1992/Downloads/audio_cloverALC-120_v1.0f.command ; exit;


Agreement

The audio_cloverALC script is for personal use only. Do not distribute

the patch, any or all of the files or the resulting patched AppleHDA.kext

for any reason without permission. The audio_cloverALC script is

provided as is and without any kind of warranty.


File: audio_cloverALC-120.command_v1.0f

Release Mode

Password:

EFI partition is mounted

System Integrity Protection status: disabled.


OK to patch

Confirm Realtek ALC1150 (y/n): y

Clover Audio ID Injection (y/n): y

Use Audio ID: 1 (y/n): y


Download ALC1150 files ...

% Total % Received % Xferd Average Speed Time Time Time Current

Dload Upload Total Spent Left Speed

100 23555 100 23555 0 0 49727 0 --:--:-- --:--:-- --:--:-- 49694

Edit config.plist/Devices/Audio/Inject/1

Edit config.plist/SystemParameters/InjectKexts/YES

Download kext patches

% Total % Received % Xferd Average Speed Time Time Time Current

Dload Upload Total Spent Left Speed

100 1838 100 1838 0 0 7084 0 --:--:-- --:--:-- --:--:-- 7096



And thats it, doesn't complite. :/ Any idea?

 

[giacomoleopardo]

And thats it, doesn't complite. :/ Any idea?

delete from the CLOVER\Kexts\10.12, the realtekALC.kext file, plus, from config.plist, delete all the AppleHDA patches and the AppleHDAController one from Kernel and Kext Patches/KextToPatch, then rebuild cache, reboot (no audio, of course) and run toleda's script again. It should work as expected