- Joined
- Jun 24, 2013
- Messages
- 27
- Motherboard
- Gigabyte Z690 Aorus Elite AX DDR5
- CPU
- i7-12700K
- Graphics
- RX 6600
- Mac
Hi All,
I went from a perfectly running setup to glitches by adding an SSD....
Mobo- Z77X-UD5H
I7-3770K
8GB Corsair Vengeance
256 GB ADATA SSD
ran Unibeast and Multibeast fine, used the optimized settings suggested at TonyMac for my MOBO. Made the SSD PO and P1 in the BIOS. Booting flashes the Gigabyte screen, then black screen, then monitors say no signal. All other SATA ports are empty. F12 trying to load the SSD, no luck. Can only boot with USB Unibeast installed.
Why? Please.....I've spent all day and checked every thread at this site in regards to this.....
I went from a perfectly running setup to glitches by adding an SSD....
Mobo- Z77X-UD5H
I7-3770K
8GB Corsair Vengeance
256 GB ADATA SSD
ran Unibeast and Multibeast fine, used the optimized settings suggested at TonyMac for my MOBO. Made the SSD PO and P1 in the BIOS. Booting flashes the Gigabyte screen, then black screen, then monitors say no signal. All other SATA ports are empty. F12 trying to load the SSD, no luck. Can only boot with USB Unibeast installed.
Why? Please.....I've spent all day and checked every thread at this site in regards to this.....