- Joined
- Oct 12, 2014
- Messages
- 25
- Motherboard
- Gigabyte - GA-B150M-D3H
- CPU
- Intel 6700K
- Graphics
- Gigabyte Gforce GTX960
Hi,
I just installed Ubuntu on my second SSD, but the installation does not show up in clover. I tried it with a seperate EFI partition on the Ubuntu drive and by installing the bootloader onto the same EFI partition as clover, but nothing seems to work. I also tried to put a custom entry in my clover.plst, but that does not help either.
These are my drives:
And this is my custom entry:
Do you have any idea how to get clover to show the ubuntu installation? I already made sure Ubuntu was indeed installed with UEFI, so this cannot be the problem.
Thanks in advance!
I just installed Ubuntu on my second SSD, but the installation does not show up in clover. I tried it with a seperate EFI partition on the Ubuntu drive and by installing the bootloader onto the same EFI partition as clover, but nothing seems to work. I also tried to put a custom entry in my clover.plst, but that does not help either.
These are my drives:
Code:
ben@BenBigUbuntu:~$ sudo blkid
[sudo] password for ben:
/dev/sda1: LABEL="EFI" UUID="67E3-17ED" TYPE="vfat" PARTUUID="417ef9e7-64f3-cf49-9241-4cae2692761e"
/dev/sda2: UUID="e7b678da-8599-3f0c-b0dd-1a5b737c2267" LABEL="Mac" TYPE="hfsplus" PARTUUID="b0efcd20-276b-0e45-a865-9fed73ba05ee"
/dev/sda3: UUID="5fabc302-6165-3d95-b589-9b4f4acea3f2" LABEL="Recovery HD" TYPE="hfsplus" PARTUUID="11b04836-b664-4c77-9101-dcf7845a63d5"
/dev/sda4: UUID="fa712c05-192e-3f90-ad63-10e599c1bf5f" LABEL="Recovery HD" TYPE="hfsplus" PARTUUID="63a72a3f-973d-4345-8f8e-5ccb94290a8b"
/dev/sdb1: UUID="4B47-DF45" TYPE="vfat" PARTUUID="bbf17516-a40e-4e64-b506-199f0fb34144"
/dev/sdb2: UUID="7502e7f9-fcf7-4002-95ad-28969b6eb1cd" TYPE="swap" PARTUUID="a5805343-f19f-43ca-854c-d1e30eaff3f3"
/dev/sdb3: UUID="1dcc22d0-0aab-46d7-9163-cf2d8959837a" TYPE="ext4" PARTUUID="49688412-9280-4558-9fdc-d6482224015a"
/dev/sdd1: UUID="2016-10-12-20-09-47-00" LABEL="Ubuntu-GNOME 16.10 amd64" TYPE="iso9660" PTUUID="12617a9b" PTTYPE="dos" PARTUUID="12617a9b-01"
/dev/sdd2: SEC_TYPE="msdos" UUID="34F4-A3F4" TYPE="vfat" PARTUUID="12617a9b-02"
And this is my custom entry:
Code:
<key>Custom</key>
<dict>
<key>Entries</key>
<array>
<dict>
<key>Disabled</key>
<false/>
<key>FullTitle</key>
<string>Ubuntu 16.10</string>
<key>Hidden</key>
<false/>
<key>Ignore</key>
<false/>
<key>Type</key>
<string>Linux</string>
<key>Volume</key>
<string>1dcc22d0-0aab-46d7-9163-cf2d8959837a</string>
<key>VolumeType</key>
<string>Internal</string>
</dict>
</array>
</dict>
Do you have any idea how to get clover to show the ubuntu installation? I already made sure Ubuntu was indeed installed with UEFI, so this cannot be the problem.
Thanks in advance!