I have a Gigabyte 980ti WindForce managed to get the drivers working, however full acceleration isn't working properly. Installed CUDA drivers and nothing, the display is good no issues with the card but I can't utilize its full potential. Unigine Valley crashes and can't perform proper video benchmark (huge dealbreaker here!!!)
Also no luck with
I have a Gigabyte 980ti WindForce managed to get the drivers working, however full acceleration isn't working properly. Installed CUDA drivers and nothing, the display is good no issues with the card but I can't utilize its full potential. Unigine Valley crashes and can't perform proper video benchmark (huge dealbreaker here!!!)
Also no luck with audio, if anyone is down for TeamViewer please msg me. Thanks
Specs:
OS: 10.12.2 (Should I downgrade to 11.11.6??)
MB: GA-Z170X-Gaming 7 Rev 1.0
CPU: i7-6700K 4.00Ghz
MEM: 32GB DDR4
SSD: Samsung 850 EVO (thinking about using NVME instead but no luck injecting on install)
This is the solution -
Problem 6: You select Nvidia Web Drivers in the menu bar or the Nvidia Driver Manager preference pane but when you restart OS X Default Graphics Driver is checked.
This is caused when your board does not have native NVRAM support such as Gigabyte 100 series boards.
Fix: setup emulated NVRAM to store the nvda_drv=1 boot flag in boot-args.
Download the Clover installer pkg
here, launch the installer and choose customize here:
After that make sure you have selected EmuVariableUefi-64:
Proceed with the Clover upgrade install and reboot when done. After the reboot open up your system preferences and go the the Nvidia Driver Manager. It is a good idea to make sure you have the most up to date driver so go to the updates tab and click the Check Now button. If there is an update, perform the update and reboot when it tell you to. You should be done at this point. If there isn't an update proceed to the next step.
If there was no upgrade, click on the Graphics Drivers tab and then choose the radio button next to the NVIDIA Web Drive. Reboot.
Once rebooted, it should say that you are using the NVIDIA web driver. If it is not working still then you may need to re-run the Clover installer and select "Install RC scripts on target volume".
----------------------------
Please let me know of any other errors you are encountering and I will update this post with solutions.